[hylafax-users] sendpage problem

["bhupi" <bits3@bisquare.com>]

Hi everybody
i m finding difficult to send pager successfuly using sendpage command.i
invoke sendpage as "sendpage -q -p 9604404962 hello" .no is of Pagelink
service provider in india.My pagemap file is okay .I've attached log file to
understand problem properly.Modem i m using is (while runnning faxaddmodem
when i configure it in class2 mode manufacturer is CIS & model is Motorola
ISG-141EM5).this modem works absolutely fine for sending fax.for
"PagerSetupCmds i've used ATF4 of which i m not sure...
Anyone having used it before or having idea of problem please let me know...
thanks & regards
bhupi


hey this is my log file.........


May 28 15:04:21.70: [ 2888]: SESSION BEGIN 00000126 91119603404962
May 28 15:04:21.70: [ 2888]: HylaFAX (tm) Version 4.1.2
May 28 15:04:21.70: [ 2888]: SEND PAGE: JOB 182 DEST 9603404962 COMMID
00000126
May 28 15:04:21.70: [ 2888]: DELAY 75 ms
May 28 15:04:21.78: [ 2888]: DELAY 2600 ms
May 28 15:04:24.38: [ 2888]: <-- [4:ATZ\r]
May 28 15:04:25.38: [ 2888]: --> [2:OK]
May 28 15:04:25.38: [ 2888]: DELAY 3000 ms
May 28 15:04:28.38: [ 2888]: <-- [5:ATE0\r]
May 28 15:04:28.54: [ 2888]: --> [4:ATE0]
May 28 15:04:28.57: [ 2888]: --> [2:OK]
May 28 15:04:28.57: [ 2888]: <-- [5:ATV1\r]
May 28 15:04:28.77: [ 2888]: --> [2:OK]
May 28 15:04:28.77: [ 2888]: <-- [5:ATQ0\r]
May 28 15:04:28.96: [ 2888]: --> [2:OK]
May 28 15:04:28.96: [ 2888]: <-- [7:ATS0=0\r]
May 28 15:04:29.17: [ 2888]: --> [2:OK]
May 28 15:04:29.17: [ 2888]: <-- [7:ATS8=2\r]
May 28 15:04:29.38: [ 2888]: --> [2:OK]
May 28 15:04:29.38: [ 2888]: <-- [8:ATS7=60\r]
May 28 15:04:29.60: [ 2888]: --> [2:OK]
May 28 15:04:29.60: [ 2888]: <-- [5:ATM0\r]
May 28 15:04:29.79: [ 2888]: --> [2:OK]
May 28 15:04:29.79: [ 2888]: STATE CHANGE: RUNNING -> SENDING
May 28 15:04:29.79: [ 2888]: <-- [12:AT+FCLASS=0\r]
May 28 15:04:30.14: [ 2888]: --> [2:OK]
May 28 15:04:30.14: [ 2888]: <-- [5:ATF4\r]
May 28 15:04:30.44: [ 2888]: --> [2:OK]
May 28 15:04:30.44: [ 2888]: DIAL 9603404962
May 28 15:04:30.44: [ 2888]: <-- [18:ATDT0,9603404962@\r]
May 28 15:05:14.72: [ 2888]: --> [19:CONNECT 1200/LAPM-V]
May 28 15:05:14.72: [ 2888]: EXPECT ID (paging central identification)
May 28 15:05:16.72: [ 2888]: RECV ID ("ID=")
May 28 15:05:16.72: [ 2888]: SEND device identification/login request
May 28 15:05:18.63: [ 2888]: RECV ACK (login successful)
May 28 15:05:18.63: [ 2888]: RECV go-ahead (prologue done)
May 28 15:05:18.63: [ 2888]: SEND message block
May 28 15:05:20.61: [ 2888]: RECV NAK (message block rejected)
May 28 15:05:20.61: [ 2888]: SEND message block (retransmit)
May 28 15:05:20.61: [ 2888]: RECVunknown paging central response: ^U
May 28 15:05:22.68: [ 2888]: RECV NAK (message block rejected)
May 28 15:05:22.68: [ 2888]: SEND message block (retransmit)
May 28 15:05:22.68: [ 2888]: RECVunknown paging central response: ^U
May 28 15:05:24.75: [ 2888]: RECV NAK (message block rejected)
May 28 15:05:24.75: [ 2888]: <-- [5:ATH0\r]
May 28 15:05:29.75: [ 2888]: MODEM <Timeout>
May 28 15:05:29.75: [ 2888]: STATE CHANGE: SENDING -> MODEMWAIT
May 28 15:05:29.75: [ 2888]: SESSION END
............

winmail.dat