HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] EOP Errors & General Failures



I am still having a major problem with a site not getting faxes through.
I've set the modem down to a class 1, it is a USR Sportster internal PCI
56K (OEM5610), and is still bombing out.

Here is a copy of the error that I am emailed from the server receiving
the fax. (Both are running hylafax.)

May 21 14:21:34.92: [ 1489]: SESSION BEGIN 00000007 15192457027
May 21 14:21:34.92: [ 1489]: HylaFAX (tm) Version 4.1.2
May 21 14:21:34.92: [ 1489]: <-- [4:ATA\r]
May 21 14:21:41.08: [ 1489]: --> [4:+FCO]
May 21 14:21:41.08: [ 1489]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS1'
May 21 14:21:41.08: [ 1489]: RECV FAX: begin
May 21 14:21:43.09: [ 1489]: --> [27:+FTI:"Middlesex Concrete F"]
May 21 14:21:43.09: [ 1489]: REMOTE TSI "Middlesex Concrete F"
May 21 14:21:43.09: [ 1489]: --> [20:+FCS:1,5,0,2,0,0,0,0]
May 21 14:21:43.09: [ 1489]: REMOTE wants 14400 bit/s
May 21 14:21:43.09: [ 1489]: REMOTE wants page width 1728 pixels in 215
mm
May 21 14:21:43.09: [ 1489]: REMOTE wants unlimited page length 
May 21 14:21:43.09: [ 1489]: REMOTE wants 7.7 line/mm
May 21 14:21:43.09: [ 1489]: REMOTE wants 1-D MR
May 21 14:21:43.09: [ 1489]: --> [2:OK]
May 21 14:21:43.10: [ 1489]: <-- [7:AT+FDR\r]
May 21 14:21:50.66: [ 1489]: --> [7:+FHS:73]
May 21 14:21:50.66: [ 1489]: REMOTE HANGUP: T.30 T2 timeout, expected
page not received (code 73)
May 21 14:21:50.66: [ 1489]: RECV FAX (00000007): recvq/fax00004.tif
from Middlesex Concrete F, route to <unspecified>, 0 pages in 0:09
May 21 14:21:50.68: [ 1489]: RECV FAX: T.30 T2 timeout, expected page
not received
May 21 14:21:50.68: [ 1489]: RECV FAX (00000007): session with Middlesex
Concrete F terminated abnormally: T.30 T2 timeout, expected page not
received
May 21 14:21:50.68: [ 1489]: RECV FAX: bin/faxrcvd "recvq/fax00004.tif"
"ttyS1" "00000007" "T.30 T2 timeout, expected page not received" "" ""

I try to a machine running Winfax 10 and I get an error about sending
the EOP 3 times and not getting a response.

Any ideas on this?

Thanks,
-- 
-=/>Thom
Red Hat Linux release 7.3 (Valhalla) running Linux Kernel 2.4.18-4
Uptime:   2:25pm  up 6 days,  6:12,  3 users,  load average: 1.02, 1.12,
1.11
Registered Linux User 214499


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions