Re: [hylafax-users] Numerous problems with HF4.1 & MicroLink 56kFun IIa

To: Lee Howard <faxguy@deanox.com>
Subject: Re: [hylafax-users] Numerous problems with HF4.1 & MicroLink 56kFun IIa
From: "Karim 'Kasi Mir' Senoucci" <kasi.mir@melzone.de>
Cc: Hylafax-users mailing list <hylafax-users@hylafax.org>
Date: Tue, 14 May 2002 13:42:07 +0200 (CEST)

Hello all,
On Mon, 13 May 2002, Lee Howard wrote:
>On 2002.05.13 04:53 Karim 'Kasi Mir' Senoucci wrote:
>> Hello all,
>> On Mon, 13 May 2002, Lee Howard wrote:
>>
>> [...]
>> >> ModemType:              Class2          # use this to supply a hint
>> >
>> >Tried using Class 1?
>>
>> Yes, I did, but the modem couldn't even be initialized for receiving -
>> faxgetty always gave up. I can try and dig up the reports if you think
>> that would help.
>
>Definitely, yes.

Okay, I will try to find the old logs - I tried out Class1 about four
months ago.

[...]
>> (The X3 part actually isn't needed anymore as the modem now gets a valid
>> "line free" signal directly without dialing "0" first.) If I use ATZ,
>> the initialization of the modem fails and I can't send or receive
>> anything! I think it might have to do something with the fact that the
>> modem answers to "ATZ" with "0" (as the initialization *always* fails
>> there) but as I stated before, I'm not that much of a fax expert. How
>> can I use "ATZ" above with the Fun IIa?
>
>Please send probemodem output.  However, this modem is broken if it
>returns "0" after "ATZ".

It definitely does, I tested that again just minutes ago.

Here is the probemodem output - I hope this helps.

--------------------------------------------------------------------------
Probing for best speed to talk to modem: 38400 OK.

This looks like a Class 1+2 modem.

ATI0    RESULT = "OK"   RESPONSE = "OK"
ATI1    RESULT = "OK"   RESPONSE = "2F9D"
ATI2    RESULT = "OK"   RESPONSE = "OK"
ATI3    RESULT = "OK"   RESPONSE = "Version 1.00 / 16.05.2001"

Class 1 stuff...

AT+FCLASS=?     RESULT = "OK"   RESPONSE = "0,1,2,8"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "2"
AT+FCLASS=0     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS=1     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
AT+FJUNK=?      RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FJUNK?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAA=?        RESULT = "OK"   RESPONSE = "0,1"
AT+FAA? RESULT = "OK"   RESPONSE = "0"
AT+FAE=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAE? RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FTH=?        RESULT = "OK"   RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146"
AT+FRH=?        RESULT = "OK"   RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146"
AT+FTM=?        RESULT = "OK"   RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146"
AT+FRM=?        RESULT = "OK"   RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146"
AT+FTS=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FRS=?        RESULT = "ERROR"        RESPONSE = "ERROR"

Class 2 stuff...

AT+FCLASS=?     RESULT = "OK"   RESPONSE = "0,1,2,8"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
AT+FCLASS=0     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS=1     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS=2     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "2"
AT+FJUNK=?      RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FJUNK?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAA=?        RESULT = "OK"   RESPONSE = "0,1"
AT+FAA? RESULT = "OK"   RESPONSE = "0"
AT+FAXERR=?     RESULT = "OK"   RESPONSE = "OK"
AT+FAXERR?      RESULT = "OK"   RESPONSE = "0"
AT+FBADLIN=?    RESULT = "OK"   RESPONSE = "0-255"
AT+FBADLIN?     RESULT = "OK"   RESPONSE = "5"
AT+FBADMUL=?    RESULT = "OK"   RESPONSE = "0-255"
AT+FBADMUL?     RESULT = "OK"   RESPONSE = "20"
AT+FBOR=?       RESULT = "OK"   RESPONSE = "0-3"
AT+FBOR?        RESULT = "OK"   RESPONSE = "0"
AT+FBUF=?       RESULT = "OK"   RESPONSE = "OK"
AT+FBUF?        RESULT = "OK"   RESPONSE = "2448,2252,2124,1"
AT+FBUG=?       RESULT = "OK"   RESPONSE = "0,1"
AT+FBUG?        RESULT = "OK"   RESPONSE = "0"
AT+FCIG=?       RESULT = "OK"   RESPONSE = "(32-127)"
AT+FCIG?        RESULT = "OK"   RESPONSE = ""                    ""
AT+FCQ=?        RESULT = "OK"   RESPONSE = "0-1"
AT+FCQ? RESULT = "OK"   RESPONSE = "0"
AT+FCR=?        RESULT = "OK"   RESPONSE = "0,1"
AT+FCR? RESULT = "OK"   RESPONSE = "1"
AT+FTBC=?       RESULT = "OK"   RESPONSE = "0"
AT+FTBC?        RESULT = "OK"   RESPONSE = "0"
AT+FDCC=?       RESULT = "OK"   RESPONSE = "(0-1),(0-5),(0-2),(0-2),(0-2),(0),(0),(0-7)"
AT+FDCC?        RESULT = "OK"   RESPONSE = "1,5,2,2,2,0,0,0"
AT+FDCS=?       RESULT = "OK"   RESPONSE = "OK"
AT+FDCS?        RESULT = "OK"   RESPONSE = "0,0,0,0,0,0,0,0"
AT+FDIS=?       RESULT = "OK"   RESPONSE = "(0-1),(0-5),(0-2),(0-2),(0-2),(0),(0),(0-7)"
AT+FDIS?        RESULT = "OK"   RESPONSE = "1,5,2,2,2,0,0,0"
AT+FDT=?        RESULT = "OK"   RESPONSE = "OK"
AT+FDT? RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FECM=?       RESULT = "OK"   RESPONSE = "0"
AT+FECM?        RESULT = "OK"   RESPONSE = "0"
AT+FET=?        RESULT = "OK"   RESPONSE = "0-2"
AT+FET? RESULT = "OK"   RESPONSE = "0"
AT+FLID=?       RESULT = "OK"   RESPONSE = "(32-127)"
AT+FLID?        RESULT = "OK"   RESPONSE = ""xxxxxx xxx          ""
AT+FLNFC=?      RESULT = "OK"   RESPONSE = "0"
AT+FLNFC?       RESULT = "OK"   RESPONSE = "0"
AT+FLPL=?       RESULT = "OK"   RESPONSE = "0,1"
AT+FLPL?        RESULT = "OK"   RESPONSE = "0"
AT+FMDL?        RESULT = "OK"   RESPONSE = ""MicroLink 56k Fun II a""
AT+FMFR?        RESULT = "OK"   RESPONSE = ""ELSA AG, Aachen (Germany)""
AT+FMINSP=?     RESULT = "OK"   RESPONSE = "0-3"
AT+FMINSP?      RESULT = "OK"   RESPONSE = "0"
AT+FPHCTO=?     RESULT = "OK"   RESPONSE = "0-255"
AT+FPHCTO?      RESULT = "OK"   RESPONSE = "30"
AT+FPTS=?       RESULT = "OK"   RESPONSE = "1-3"
AT+FPTS?        RESULT = "OK"   RESPONSE = "1"
AT+FRBC=?       RESULT = "OK"   RESPONSE = "0"
AT+FRBC?        RESULT = "OK"   RESPONSE = "0"
AT+FREL=?       RESULT = "OK"   RESPONSE = "0"
AT+FREL?        RESULT = "OK"   RESPONSE = "0"
AT+FREV?        RESULT = "OK"   RESPONSE = ""Version 1.00 / 16.05.2001""
AT+FSPL=?       RESULT = "OK"   RESPONSE = "0,1"
AT+FSPL?        RESULT = "OK"   RESPONSE = "0"
AT+FTBC=?       RESULT = "OK"   RESPONSE = "0"
AT+FTBC?        RESULT = "OK"   RESPONSE = "0"
AT+FVRFC=?      RESULT = "OK"   RESPONSE = "0"
AT+FVRFC?       RESULT = "OK"   RESPONSE = "0"
AT+FWDFC=?      RESULT = "OK"   RESPONSE = "0"
AT+FWDFC?       RESULT = "OK"   RESPONSE = "0"
AT+FK=? RESULT = "OK"   RESPONSE = "OK"
--------------------------------------------------------------------------

Greetings
Kasi Mir



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null

Follow-Ups:
- Re: [hylafax-users] Numerous problems with HF4.1 & MicroLink 56kFun IIa
  - From: Bernd Proissl

References:
- Re: [hylafax-users] Numerous problems with HF4.1 & MicroLink 56k Fun IIa
  - From: Lee Howard

Prev by Date: Re: [hylafax-users] RFD - Business form overlays/merging
Next by Date: Re: [hylafax-users] Numerous problems with HF4.1 & MicroLink 56kFun IIa
Previous by thread: Re: [hylafax-users] Numerous problems with HF4.1 & MicroLink 56k Fun IIa
Next by thread: Re: [hylafax-users] Numerous problems with HF4.1 & MicroLink 56kFun IIa
Index(es):
- Main
- Thread

Project hosted by iFAX Solutions