Re: [hylafax-users] send AT+FCLASS=? result for Class 2.1-capable modems

To: <hylafax-users@hylafax.org>
Subject: Re: [hylafax-users] send AT+FCLASS=? result for Class 2.1-capable modems
From: "Bernd Proissl" <lists@proissl.de>
Reply-To: <lists@proissl.de>
Date: Thu, 2 May 2002 11:11:52 +0200

> If your modem supports fax Class 2.1 please send me the result of the 
> AT+FCLASS=? command on it.

MODEM "ELSA AG, AACHEN (GERMANY)" "MicroLink 56k pro"/"Version 1.85 / 28.04.2000"

Apr 12 06:36:10 linux3 FaxGetty[518]: OPEN /dev/ttyS1  HylaFAX (tm) Version 4.1
Apr 12 06:36:10 linux3 FaxGetty[518]: MODEM set DTR OFF
Apr 12 06:36:10 linux3 FaxGetty[518]: DELAY 75 ms
Apr 12 06:36:10 linux3 FaxGetty[518]: MODEM set DTR ON
Apr 12 06:36:10 linux3 FaxGetty[518]: DELAY 2600 ms
Apr 12 06:36:13 linux3 FaxGetty[518]: MODEM set baud rate: 19200 baud, input flow XON/XOFF, output flow XON/XOFF
Apr 12 06:36:13 linux3 FaxGetty[518]: MODEM flush i/o
Apr 12 06:36:13 linux3 FaxGetty[518]: <-- [4:ATZ\r]
Apr 12 06:36:13 linux3 FaxGetty[518]: --> [2:OK]
Apr 12 06:36:13 linux3 FaxGetty[518]: DELAY 3000 ms
Apr 12 06:36:16 linux3 FaxGetty[518]: <-- [5:ATE0\r]
Apr 12 06:36:16 linux3 FaxGetty[518]: --> [4:ATE0]
Apr 12 06:36:16 linux3 FaxGetty[518]: --> [2:OK]
Apr 12 06:36:16 linux3 FaxGetty[518]: <-- [5:ATV1\r]
Apr 12 06:36:16 linux3 FaxGetty[518]: --> [2:OK]
Apr 12 06:36:16 linux3 FaxGetty[518]: <-- [5:ATQ0\r]
Apr 12 06:36:16 linux3 FaxGetty[518]: --> [2:OK]
Apr 12 06:36:16 linux3 FaxGetty[518]: <-- [7:ATS0=0\r]
Apr 12 06:36:17 linux3 FaxGetty[518]: --> [2:OK]
Apr 12 06:36:17 linux3 FaxGetty[518]: <-- [7:ATS8=2\r]
Apr 12 06:36:17 linux3 FaxGetty[518]: --> [2:OK]
Apr 12 06:36:17 linux3 FaxGetty[518]: <-- [8:ATS7=60\r]
Apr 12 06:36:17 linux3 FaxGetty[518]: --> [2:OK]
Apr 12 06:36:17 linux3 FaxGetty[518]: <-- [12:AT+FCLASS=?\r]
Apr 12 06:36:17 linux3 FaxGetty[518]: --> [23:0,1,1.0,2,2.0,2.1,8,8.0]
Apr 12 06:36:17 linux3 FaxGetty[518]: --> [2:OK]
Apr 12 06:36:17 linux3 FaxGetty[518]: MODEM Supports "Data"
Apr 12 06:36:17 linux3 FaxGetty[518]: MODEM Supports "Class 1"
Apr 12 06:36:17 linux3 FaxGetty[518]: MODEM Supports "Class 2"
Apr 12 06:36:17 linux3 FaxGetty[518]: MODEM Supports "Class 2.0"
Apr 12 06:36:17 linux3 FaxGetty[518]: MODEM Supports "Class 1.0"
Apr 12 06:36:17 linux3 FaxGetty[518]: MODEM Supports "Class 2.1"
Apr 12 06:36:17 linux3 FaxGetty[518]: MODEM Supports "Voice"
Apr 12 06:36:17 linux3 FaxGetty[518]: <-- [14:AT+FCLASS=2.0\r]
Apr 12 06:36:17 linux3 FaxGetty[518]: --> [2:OK]
Apr 12 06:36:17 linux3 FaxGetty[518]: <-- [8:AT+FMI?\r]
Apr 12 06:36:17 linux3 FaxGetty[518]: --> [27:"ELSA AG, Aachen (Germany)"]
Apr 12 06:36:17 linux3 FaxGetty[518]: --> [2:OK]
Apr 12 06:36:17 linux3 FaxGetty[518]: MODEM: Mfr "ELSA AG, Aachen (Germany)"
Apr 12 06:36:17 linux3 FaxGetty[518]: <-- [8:AT+FMM?\r]
Apr 12 06:36:17 linux3 FaxGetty[518]: --> [19:"MicroLink 56k pro"]
Apr 12 06:36:17 linux3 FaxGetty[518]: --> [2:OK]
Apr 12 06:36:17 linux3 FaxGetty[518]: <-- [8:AT+FMR?\r]
Apr 12 06:36:18 linux3 FaxGetty[518]: --> [27:"Version 1.85 / 28.04.2000"]
Apr 12 06:36:18 linux3 FaxGetty[518]: --> [2:OK]
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM: Model "MicroLink 56k pro"
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM: Revision "Version 1.85 / 28.04.2000"
Apr 12 06:36:18 linux3 FaxGetty[518]: <-- [9:AT+FCC=?\r]
Apr 12 06:36:18 linux3 FaxGetty[518]: --> [45:(0,1),(0-5),(0-2),(0-2),(0),(0),(0),(0-7),(0)]
Apr 12 06:36:18 linux3 FaxGetty[518]: --> [2:OK]
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports 3.85 line/mm
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports 7.7 line/mm
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports 2400 bit/s
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports 4800 bit/s
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports 7200 bit/s
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports 9600 bit/s
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports 12000 bit/s
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports 14400 bit/s
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports page width 1728 pixels in 215 mm
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports page width 2048 pixels in 255 mm
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports page width 2432 pixels in 303 mm
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports A4 page length (297 mm)
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports B4 page length (364 mm)
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports unlimited page length
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports 1-D MR
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports 0 ms/scanline
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports 5 ms/scanline
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports 10 ms, 5 ms/scanline
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports 10 ms/scanline
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports 20 ms, 10 ms/scanline
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports 20 ms/scanline
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports 40 ms, 20 ms/scanline
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports 40 ms/scanline
Apr 12 06:36:18 linux3 FaxGetty[518]: <-- [9:AT+FCQ=?\r]
Apr 12 06:36:18 linux3 FaxGetty[518]: --> [11:(0-2),(0-2)]
Apr 12 06:36:18 linux3 FaxGetty[518]: --> [2:OK]
Apr 12 06:36:18 linux3 FaxGetty[518]: MODEM Supports 1D+2D copy quality checking (but not enabled)
Apr 12 06:36:18 linux3 FaxGetty[518]: <-- [14:AT+FCLASS=2.0\r]
Apr 12 06:36:18 linux3 FaxGetty[518]: --> [2:OK]
Apr 12 06:36:18 linux3 FaxGetty[518]: <-- [9:AT+FLO=1\r]
Apr 12 06:36:18 linux3 FaxGetty[518]: --> [2:OK]
Apr 12 06:36:18 linux3 FaxGetty[518]: <-- [9:AT+FBO=0\r]
Apr 12 06:36:18 linux3 FaxGetty[518]: --> [2:OK]
Apr 12 06:36:18 linux3 FaxGetty[518]: <-- [15:AT+FNR=1,1,1,1\r]
Apr 12 06:36:19 linux3 FaxGetty[518]: --> [2:OK]
Apr 12 06:36:19 linux3 FaxGetty[518]: <-- [9:AT+FIE=0\r]
Apr 12 06:36:19 linux3 FaxGetty[518]: --> [2:OK]
Apr 12 06:36:19 linux3 FaxGetty[518]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Apr 12 06:36:19 linux3 FaxGetty[518]: --> [2:OK]
Apr 12 06:36:19 linux3 FaxGetty[518]: MODEM "ELSA AG, AACHEN (GERMANY)" "MicroLink 56k pro"/"Version 1.85 / 28.04.2000"
Apr 12 06:36:19 linux3 FaxGetty[518]: <-- [5:ATM0\r]
Apr 12 06:36:19 linux3 FaxGetty[518]: --> [2:OK]
Apr 12 06:36:19 linux3 FaxGetty[518]: <-- [9:AT+FCR=1\r]
Apr 12 06:36:19 linux3 FaxGetty[518]: --> [2:OK]
Apr 12 06:36:19 linux3 FaxGetty[518]: <-- [24:AT+FLI=""\r]
Apr 12 06:36:19 linux3 FaxGetty[518]: --> [2:OK]
Apr 12 06:36:19 linux3 FaxGetty[518]: MODEM input buffering disabled

What would be the benefits of running this modem in Class 2.1?

Bernd


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null

Follow-Ups:
- Re: [hylafax-users] send AT+FCLASS=? result for Class 2.1-capablemodems
  - From: David A Smith

References:
- [hylafax-users] send AT+FCLASS=? result for Class 2.1-capable modems
  - From: Lee Howard

Prev by Date: Re: [hylafax-users] need help finding graphics rpm
Next by Date: Re: [hylafax-users] Problem - 2 Modems - doesn't answer
Previous by thread: [hylafax-users] send AT+FCLASS=? result for Class 2.1-capable modems
Next by thread: Re: [hylafax-users] send AT+FCLASS=? result for Class 2.1-capablemodems
Index(es):
- Main
- Thread

Project hosted by iFAX Solutions