[hylafax-users] problem sending

["Andrew Gingery" <gingerya@ohsu.edu>]

just installed hylafax on a red hat linux server.
I can't send a fax though, my modem seems to just hang up with a ATH0\r.

I've tried to run the modem in both class 1 and 2 modes. Same thing happens either way, though the logs look different. Modem is a MultiTech MT5600zdx on ttyS1.

here is a typical session log in class 2 mode:
Apr 24 14:48:12.24: [ 2304]: SESSION BEGIN 00000015 150342488
Apr 24 14:48:12.24: [ 2304]: HylaFAX (tm) Version 4.1.2
Apr 24 14:48:12.24: [ 2304]: SEND FAX: JOB 14 DEST 4-2488 COMMID 00000015 DEVICE '/dev/ttyS1'
Apr 24 14:48:12.24: [ 2304]: DELAY 75 ms
Apr 24 14:48:12.31: [ 2304]: DELAY 2600 ms
Apr 24 14:48:14.91: [ 2304]: <-- [4:ATZ\r]
Apr 24 14:48:15.04: [ 2304]: --> [2:OK]
Apr 24 14:48:15.04: [ 2304]: DELAY 3000 ms
Apr 24 14:48:18.04: [ 2304]: <-- [5:AT&F\r]
Apr 24 14:48:18.06: [ 2304]: --> [4:AT&F]
Apr 24 14:48:18.06: [ 2304]: --> [2:OK]
Apr 24 14:48:18.06: [ 2304]: <-- [5:ATE0\r]
Apr 24 14:48:18.07: [ 2304]: --> [4:ATE0]
Apr 24 14:48:18.07: [ 2304]: --> [2:OK]
Apr 24 14:48:18.07: [ 2304]: <-- [5:ATV1\r]
Apr 24 14:48:18.08: [ 2304]: --> [2:OK]
Apr 24 14:48:18.08: [ 2304]: <-- [5:ATQ0\r]
Apr 24 14:48:18.09: [ 2304]: --> [2:OK]
Apr 24 14:48:18.09: [ 2304]: <-- [7:ATS0=0\r]
Apr 24 14:48:18.11: [ 2304]: --> [2:OK]
Apr 24 14:48:18.11: [ 2304]: <-- [7:ATS8=2\r]
Apr 24 14:48:18.13: [ 2304]: --> [2:OK]
Apr 24 14:48:18.13: [ 2304]: <-- [8:ATS7=60\r]
Apr 24 14:48:18.15: [ 2304]: --> [2:OK]
Apr 24 14:48:18.15: [ 2304]: <-- [6:AT&K4\r]
Apr 24 14:48:18.16: [ 2304]: --> [2:OK]
Apr 24 14:48:18.16: [ 2304]: <-- [6:AT&D3\r]
Apr 24 14:48:18.17: [ 2304]: --> [2:OK]
Apr 24 14:48:18.17: [ 2304]: <-- [6:AT&C1\r]
Apr 24 14:48:18.18: [ 2304]: --> [2:OK]
Apr 24 14:48:18.18: [ 2304]: <-- [12:AT+FCLASS=2\r]
Apr 24 14:48:18.20: [ 2304]: --> [2:OK]
Apr 24 14:48:18.20: [ 2304] <-- [10:AT+FTBC=0\r]
Apr 24 14:48:18.22: [ 2304]: --> [2:OK]
Apr 24 14:48:18.22: [ 2304]: <-- [10:AT+FBOR=0\r]
Apr 24 14:48:18.24: [ 2304]: --> [2:OK]
Apr 24 14:48:18.24: [ 2304]: <-- [13:AT+FPHCTO=30\r]
Apr 24 14:48:18.26: [ 2304]: --> [2:OK]
Apr 24 14:48:18.26: [ 2304]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Apr 24 14:48:18.28: [ 2304]: --> [2:OK]
Apr 24 14:48:18.28: [ 2304]: <-- [7:ATL1M1\r]
Apr 24 14:48:18.29: [ 2304]: --> [2:OK]
Apr 24 14:48:18.29: [ 2304]: <-- [12:AT+FCLASS=2\r]
Apr 24 14:48:18.41: [ 2304]: --> [2:OK]
Apr 24 14:48:18.41: [ 2304]: <-- [10:AT+FTBC=0\r]
Apr 24 14:48:18.53: [ 2304]: --> [2:OK]
Apr 24 14:48:18.53: [ 2304]: <-- [10:AT+FBOR=0\r]
Apr 24 14:48:18.65: [ 2304]: --> [2:OK]
Apr 24 14:48:18.65: [ 2304]: <-- [13:AT+FPHCTO=30\r]
Apr 24 14:48:18.77: [ 2304]: --> [2:OK]
Apr 24 14:48:18.77: [ 2304]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Apr 24 14:48:18.89: [ 2304]: --> [2:OK]
Apr 24 14:48:18.89: [ 2304]: <-- [20:AT+FLID="OHSU-CDRC"\r]
Apr 24 14:48:19.01: [ 2304]: --> [2:OK]
Apr 24 14:48:19.01: [ 2304]: DIAL 42488
Apr 24 14:48:19.01: [ 2304]: <-- [10:ATDT42488\r]
Apr 24 14:48:35.45: [ 2304]: --> [5:+FCON]
Apr 24 14:48:37.75: [ 2304]: --> [29:+FCSI: "        503 494 2488"]
Apr 24 14:48:37.75: [ 2304]: REMOTE CSI "503 494 2488"
Apr 24 14:48:38.01: [ 2304]: --> [22:+FDIS: 1,3,0,2,0,0,0,4]
Apr 24 14:48:38.12: [ 2304]: --> [2:OK]
Apr 24 14:48:38.12: [ 2304]: REMOTE best rate 9600 bit/s
Apr 24 14:48:38.12: [ 2304]: REMOTE max page width 1728 pixels in 215 mm
Apr 24 14:48:38.12: [ 2304]: REMOTE max unlimited page length 
Apr 24 14:48:38.12: [ 2304]: REMOTE best vres 7.7 line/mm
Apr 24 14:48:38.12: [ 2304]: REMOTE best format 1-D MR
Apr 24 14:48:38.12: [ 2304]: REMOTE best 20 ms, 10 ms/scanline
Apr 24 14:48:38.12: [ 2304]: USE 9600 bit/s
Apr 24 14:48:38.12: [ 2304]: USE 20 ms, 10 ms/scanline
Apr 24 14:48:38.12: [ 2304]: <-- [5:ATH0\r]
Apr 24 14:48:38.38: [ 2304]: --> [9:+FHNG: 20]
Apr 24 14:48:38.38: [ 2304]: REMOTE HANGUP: Unspecified Transmit Pase B error (code 20)
Apr 24 14:48:39.81: [ 2304]: --> [2:OK]
Apr 24 14:48:39.81: [ 2304]: SESSION END


here is a typical class 1 log:
Apr 24 13:29:59.21: [ 2079]: SESSION BEGIN 00000013 150342488
Apr 24 13:29:59.21: [ 2079]: HylaFAX (tm) Version 4.1.2
Apr 24 13:29:59.21: [ 2079]: SEND FAX: JOB 12 DEST 4-2488 COMMID 00000013 DEVICE '/dev/ttyS1'
Apr 24 13:29:59.21: [ 2079]: DELAY 75 ms
Apr 24 13:29:59.28: [ 2079]: DELAY 2600 ms
Apr 24 13:30:01.88: [ 2079]: <-- [4:ATZ\r]
Apr 24 13:30:02.01: [ 2079]: --> [3:ATZ]
Apr 24 13:30:02.01: [ 2079]: --> [2:OK]
Apr 24 13:30:02.01: [ 2079]: DELAY 3000 ms
Apr 24 13:30:05.01: [ 2079]: <-- [5:ATE0\r]
Apr 24 13:30:05.02: [ 2079]: --> [4:ATE0]
Apr 24 13:30:05.02: [ 2079]: --> [2:OK]
Apr 24 13:30:05.02: [ 2079]: <-- [5:ATV1\r]
Apr 24 13:30:05.03: [ 2079]: --> [2:OK]
Apr 24 13:30:05.03: [ 2079]: <-- [5:ATQ0\r]
Apr 24 13:30:05.04: [ 2079]: --> [2:OK]
Apr 24 13:30:05.04: [ 2079]: <-- [7:ATS0=0\r]
Apr 24 13:30:05.06: [ 2079]: --> [2:OK]
Apr 24 13:30:05.06: [ 2079]: <-- [7:ATS8=2\r]
Apr 24 13:30:05.08: [ 2079]: --> [2:OK]
Apr 24 13:30:05.08: [ 2079]: <-- [8:ATS7=60\r]
Apr 24 13:30:05.10: [ 2079]: --> [2:OK]
Apr 24 13:30:05.10: [ 2079]: <-- [6:AT&K4\r]
Apr 24 13:30:05.11: [ 2079]: --> [2:OK]
Apr 24 13:30:05.11: [ 2079]: <-- [6:AT&D3\r]
Apr 24 13:30:05.12: [ 2079]: --> [2:OK]
Apr 24 13:30:05.12: [ 2079]: <-- [6:AT&C1\r]
Apr 24 13:30:05.13: [ 2079]: --> [2:OK]
Apr 24 13:30:05.13: [ 2079]: <-- [12:AT+FCLASS=1\r]
Apr 24 13:30:05.15: [ 2079]: --> [2:OK]
Apr 24 13:30:05.15: [ 2079]: <-- [19:AT+FCLASS=0;+FAA=1\r]
Apr 24 13:30:05.17: [ 2079]: --> [2:OK]
Apr 24 13:30:05.17: [ 2079]: <-- [7:ATL1M1\r]
Apr 24 13:30:05.18: [ 2079]: --> [2:OK]
Apr 24 13:30:05.18: [ 2079]: <-- [12:AT+FCLASS=1\r]
Apr 24 13:30:05.30: [ 2079]: --> [2:OK]
Apr 24 13:30:05.30: [ 2079]: DIAL 42488
Apr 24 13:30:05.30: [ 2079]: <-- [10:ATDT42488\r]
Apr 24 13:30:22.24: [ 2079]: --> [7:CONNECT]
Apr 24 13:30:23.60: [ 2079]: --> [2:OK]
Apr 24 13:30:23.60: [ 2079]: REOTE NSF "00 00 45 57 43 44 52 43 20 4D 45 44 49 43 41 4C 20 52 45 43 4B"
Apr 24 13:30:23.60: [ 2079]: NSF remote fax equipment: Muratec 
Apr 24 13:30:23.60: [ 2079]: NSF remote station ID: "WCDRC MEDICAL RECK"
Apr 24 13:30:23.60: [ 2079]: <-- [9:AT+FRH=3\r]
Apr 24 13:30:23.62: [ 2079]: --> [7:CONNECT]
Apr 24 13:30:24.29: [ 2079]: --> [2:OK]
Apr 24 13:30:24.29: [ 2079]: REMOTE CSI "503 494 2488"
Apr 24 13:30:24.29: [ 2079]: <-- [9:AT+FRH=3\r]
Apr 24 13:30:24.31: [ 2079]: --> [7:CONNECT]
Apr 24 13:30:24.56: [ 2079]: --> [2:OK]
Apr 24 13:30:24.56: [ 2079]: REMOTE best rate 9600 bit/s
Apr 24 13:30:24.56: [ 2079]: REMOTE max page width 1728 pixels in 215 mm
Apr 24 13:30:24.56: [ 2079]: REMOTE max unlimited page length 
Apr 24 13:30:24.56: [ 2079]: REMOTE best vres 7.7 line/mm
Apr 24 13:30:24.56: [ 2079]: REMOTE best format 1-D MR
Apr 24 13:30:24.56: [ 2079]: REMOTE best 20 ms, 10 ms/scanline
Apr 24 13:30:24.56: [ 2079]: USE 9600 bit/s
Apr 24 13:30:24.56: [ 2079]: USE 20 ms, 10 ms/scanline
Apr 24 13:30:24.56: [ 2079]: <-- [9:AT+FTH=3\r]
Apr 24 13:30:24.61: [ 2079]: --> [7:CONNECT]
Apr 24 13:30:24.61: [ 2079]: <-- data [3]
Apr 24 13:30:24.61: [ 2079]: <-- data [2]
Apr 24 13:30:25.93: [ 2079]: --> [2:OK]
Apr 24 13:30:25.93: [ 2079]: <-- [5:ATH0\r]
Apr 24 13:30:27.47: [ 2079]: --> [2:OK]
Apr 24 13:30:27.47: [ 2079]: SESSION END

=============================================
There are two fax machines I am trying to send to, both a Muratecs. An old one and a newish F-95.
The old one does nothing, but the newer F-95 printed out an error report that said basicly:
AUTO RX   mode 24  result 33
The error report came out when sending to it in class 1, nothing happens if I try to send to it in class 2 mode.

Needles to say I would be most gratefull for any assistance.

PS- I can switch between class 1 and two simply by editing the config.ttyS1 file right? That seems to work.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null