![]() |
I'm afraid not. Trey ----- Original Message ----- From: "Lee Howard" <faxguy@deanox.com> To: "Trey Nolen" <tnolen@web4.internetpro.net> Cc: <hylafax-users@hylafax.org> Sent: Tuesday, April 16, 2002 3:00 PM Subject: Re: [hylafax-users] retraining problem > On 2002.04.08 09:34 Trey Nolen wrote: > > I've got a weird problem with a new Hylafax install. I can send faxes > > fine. I can receive faxes fine from another Hylafax server. However, on > > regular fax machines, I get a retraining error. Here is a typical trace > > of > > the session: > .... > > Apr 08 10:55:55.37: [32563]: REMOTE wants 2-D MR > > Apr 08 10:55:55.37: [32563]: RECV training at v.17 14400 bit/s > > Apr 08 10:55:55.37: [32563]: <-- [11:AT+FRM=145\r] > > Apr 08 10:55:57.07: [32563]: --> [7:CONNECT] > > Apr 08 10:56:00.40: [32563]: MODEM TIMEOUT: receiving TCF > > Apr 08 10:56:00.40: [32563]: <-- data [1] > > Apr 08 10:56:00.40: [32563]: --> [10:NO CARRIER] > > Apr 08 10:56:00.40: [32563]: MODEM No carrier > > Apr 08 10:56:00.40: [32563]: RECV: TCF 5943 bytes, 96% non-zero, 1 > > zero-run > > Apr 08 10:56:00.40: [32563]: RECV: reject TCF (too many non-zero, max > > 10%) > > Apr 08 10:56:00.40: [32563]: RECV: reject TCF (zero run too short, min > > 1800) > > Apr 08 10:56:30.40: [32563]: MODEM TIMEOUT: reading line from modem > > Apr 08 10:56:30.40: [32563]: MODEM <Empty line> > > Apr 08 10:56:30.40: [32563]: DELAY 75 ms > > Apr 08 10:56:30.48: [32563]: <-- [9:AT+FTH=3\r] > > Apr 08 10:56:30.54: [32563]: --> [7:CONNECT] > > Apr 08 10:56:30.54: [32563]: <-- HDLC<3:FF C8 22> > > Apr 08 10:56:30.54: [32563]: <-- data [3] > > Apr 08 10:56:30.54: [32563]: <-- data [2] > > Apr 08 10:56:31.85: [32563]: --> [2:OK] > > Apr 08 10:56:31.85: [32563]: TRAINING failed > > Did you get this resolved? > > Lee. > ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null