 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] SV: Rockwell / Conexant: "No response to MPS ..." and other problems
- To: "Jeff Herring" <jeffh@sldsi.com>, <hylafax-users@hylafax.org>
- Subject: [hylafax-users] SV: Rockwell / Conexant: "No response to MPS ..." and other problems
- From: "Johan Ekenberg" <johan@ekenberg.se>
- Date: Fri, 12 Apr 2002 19:21:11 +0200
Sorry, that didn't help. No change, exactly the same behaviour. I forgot to tell before that if I send a coverpage (ie use sendfax without -n), the coverpage is received and printed ok, but nothing else. /Johan > On the sendfax command line try specifying the "-1" option to force 1D > encoding. > > This may be appropriate only for the HP device however... > > -Jeff H. > > At 06:06 PM 4/12/02 +0200, Johan Ekenberg wrote: > >Hi! > > > >I just built and installed Hylafax 4.1.1 on a Slackware 8.0 > Linux system. > >The modem is branded "Bestmatic", and it seems to have a > Rockwell/Conexant > >chipset. Installation and configuration went smoothly until I tried to > >send faxes. I'm trying to fax to a HP OfficeJet G85 Fax, but it > won't work: > > > > - If I send only one page everything looks ok on the Hylafax-side. On > > the HP side the fax seems to be received ok but then it's never > printed (!!). > > - If I send two or more pages I get the infamous "No response > to MPS or > > EOP repeated 3 times". > > - I've tried to use both Class 1 and Class 2, but no difference. > > > >I'm a newbie when it comes to (Hyla)faxes and modems so I don't exactly > >know what info to send. Below is: > > a) How faxaddmodem identifies the modem > > b) From config.modem when trying Class 1 > > c) From config.modem when trying Class 2 > > d) The output from "probemodem" > > e) The logfile from sending 1 page. Everything seems to work > well, but > > the fax is never printed on the receiving side (HP OfficeJet). > If this is > > a HP problem I've never experienced it or heard about it before. > > f) The logfile from sending 2 pages. No response to MPS... etc. > > > >Please help me, I really want to use Hylafax! If you need any more > >information I'll be happy to provide it. > > > >Regards, > >/Johan Ekenberg - Sweden > > > >------ Logs and info ------ > > > >===== faxaddmodem gives this identification of the chipset: > > > >Hmm, this looks like a Class 1 modem. > >Product code (ATI0) is "56000". > >Other information (ATI3) is "P2107-V90". > >Modem manufacturer is "Rockwell/Conexant". > >Modem model is "AC/K56". > > > > > >===== Class 1 config.modem > ># Configuration for a Rockwell RC288DPi-based Class 1 modem. > ># Hayes Optima 28800 firmware rev ??? > ># Microcom DeskPorte 28.8S firmware rev V1.100K-V34_DS > ># PPI PM288FXMT firmware rev 1.57 > > ... > >ModemType: Class1 # use this to supply a hint > >ModemRate: 38400 # rate for DCE-DTE communication > >ModemFlowControl: rtscts # default > ># > >ModemNoFlowCmd: AT&K0 # setup no flow control > >ModemHardFlowCmd: AT&K3 # setup hardware flow control > >ModemSoftFlowCmd: AT&K4 # setup software flow control > >ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem > >ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier > >(or not)# > >ModemMfrQueryCmd: !Rockwell > >ModemModelQueryCmd: !RC288DPi > >ModemRevQueryCmd: ATI3 # product information > ># > >ModemDialCmd: ATDT%s # T for tone dialing > > > > > > > >===== Class 2 config.modem: > ># Configuration for a Rockwell AC/K56-based Class 2 modem. > ># based upon work of Mark J. Bailey, Jonathan Mau and Glenn Burkhardt. > ># Multitech MT5600ZDX > ># Diamond Multimedia SupraExpress 56e PRO > ># Zoom Telephonics 56Kx > ># (and others) > > ... > >ModemType: Class2 # use class 2 interface > >ModemRate: 38400 > >ModemFlowControl: xonxoff # default > >ModemWaitForConnect: yes # wait for CONNECT on answer > ># > >#ModemResetCmds: AT&F2 # what you want for a Supra > >ModemNoFlowCmd: AT&K # disable flow control cmd > >ModemHardFlowCmd: AT&K3 # hardware flow control cmd > >ModemSoftFlowCmd: AT&K4 # software flow control cmd > >ModemSetupDTRCmd: AT&D3 # DTR off causes modem to reset > >ModemSetupDCDCmd: AT&C1 # DCD follows carrier > >ModemSetupAACmd: AT+FCLASS=0;+FAA=1 # enable in class 0 > ># > >ModemSendFillOrder: LSB2MSB # as expected > >ModemRecvFillOrder: MSB2LSB # opposite of what makes sense > >Class2RecvDataTrigger: "\022" # a la 2388-B > > > > > > > >===== probemodem: > > > >Probing for best speed to talk to modem: 38400 OK. > > > >This looks like a Class 1 modem. > > > >ATI0 RESULT = "OK" RESPONSE = "56000" > >ATI1 RESULT = "OK" RESPONSE = "030" > >ATI2 RESULT = "OK" RESPONSE = "OK" > >ATI3 RESULT = "OK" RESPONSE = "P2107-V90" > > > >Class 1 stuff... > > > >AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,1.0,2,8,10" > >AT+FCLASS? RESULT = "OK" RESPONSE = "1" > >AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK" > >AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK" > >AT+FCLASS? RESULT = "OK" RESPONSE = "1" > >AT+FJUNK=? RESULT = "ERROR" RESPONSE = "ERROR" > >AT+FJUNK? RESULT = "ERROR" RESPONSE = "ERROR" > >AT+FAA=? RESULT = "ERROR" RESPONSE = "ERROR" > >AT+FAA? RESULT = "ERROR" RESPONSE = "ERROR" > >AT+FAE=? RESULT = "OK" RESPONSE = "(0,1)" > >AT+FAE? RESULT = "OK" RESPONSE = "0" > >AT+FTH=? RESULT = "OK" RESPONSE = > >"3,24,48,72,73,74,96,97,98,121,122,145,146" > >AT+FRH=? RESULT = "OK" RESPONSE = > >"3,24,48,72,73,74,96,97,98,121,122,145,146" > >AT+FTM=? RESULT = "OK" RESPONSE = > >"3,24,48,72,73,74,96,97,98,121,122,145,146" > >AT+FRM=? RESULT = "OK" RESPONSE = > >"3,24,48,72,73,74,96,97,98,121,122,145,146" > >AT+FTS=? RESULT = "ERROR" RESPONSE = "ERROR" > >AT+FRS=? RESULT = "ERROR" RESPONSE = "ERROR" > > > > > > > >===== Logfile from trying to send 1 page to a HP OfficeJet G85 > Fax Machine > >(where everything looks ok when sending, but the fax is never > printed (!?) > > > >Apr 12 15:24:57.52: [ 938]: SESSION BEGIN 00000006 46317043887 > >Apr 12 15:24:57.52: [ 938]: HylaFAX (tm) Version 4.1.1 > >Apr 12 15:24:57.52: [ 938]: SEND FAX: JOB 4 DEST 7043887 COMMID > 00000006 > >DEVICE '/dev/modem' > >Apr 12 15:24:57.52: [ 938]: DELAY 75 ms > >Apr 12 15:24:57.60: [ 938]: DELAY 2600 ms > >Apr 12 15:25:00.20: [ 938]: <-- [4:ATZ\r] > >Apr 12 15:25:00.29: [ 938]: --> [2:OK] > >Apr 12 15:25:00.29: [ 938]: DELAY 3000 ms > >Apr 12 15:25:03.29: [ 938]: <-- [5:ATE0\r] > >Apr 12 15:25:03.30: [ 938]: --> [4:ATE0] > >Apr 12 15:25:03.30: [ 938]: --> [2:OK] > >Apr 12 15:25:03.30: [ 938]: <-- [5:ATV1\r] > >Apr 12 15:25:03.32: [ 938]: --> [2:OK] > >Apr 12 15:25:03.32: [ 938]: <-- [5:ATQ0\r] > >Apr 12 15:25:03.34: [ 938]: --> [2:OK] > >Apr 12 15:25:03.34: [ 938]: <-- [7:ATS0=0\r] > >Apr 12 15:25:03.36: [ 938]: --> [2:OK] > >Apr 12 15:25:03.36: [ 938]: <-- [7:ATS8=2\r] > >Apr 12 15:25:03.38: [ 938]: --> [2:OK] > >Apr 12 15:25:03.38: [ 938]: <-- [8:ATS7=60\r] > >Apr 12 15:25:03.40: [ 938]: --> [2:OK] > >Apr 12 15:25:03.40: [ 938]: <-- [6:AT&K4\r] > >Apr 12 15:25:03.42: [ 938]: --> [2:OK] > >Apr 12 15:25:03.42: [ 938]: <-- [6:AT&D3\r] > >Apr 12 15:25:03.45: [ 938]: --> [2:OK] > >Apr 12 15:25:03.45: [ 938]: <-- [6:AT&C1\r] > >Apr 12 15:25:03.47: [ 938]: --> [2:OK] > >Apr 12 15:25:03.47: [ 938]: <-- [12:AT+FCLASS=2\r] > >Apr 12 15:25:03.49: [ 938]: --> [2:OK] > >Apr 12 15:25:03.49: [ 938]: <-- [10:AT+FTBC=0\r] > >Apr 12 15:25:03.51: [ 938]: --> [2:OK] > >Apr 12 15:25:03.51: [ 938]: <-- [10:AT+FBOR=0\r] > >Apr 12 15:25:03.53: [ 938]: --> [2:OK] > >Apr 12 15:25:03.53: [ 938]: <-- [13:AT+FPHCTO=30\r] > >Apr 12 15:25:03.56: [ 938]: --> [2:OK] > >Apr 12 15:25:03.56: [ 938]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r] > >Apr 12 15:25:03.59: [ 938]: --> [2:OK] > >Apr 12 15:25:03.59: [ 938]: <-- [5:ATM0\r] > >Apr 12 15:25:03.61: [ 938]: --> [2:OK] > >Apr 12 15:25:03.61: [ 938]: <-- [12:AT+FCLASS=2\r] > >Apr 12 15:25:03.73: [ 938]: --> [2:OK] > >Apr 12 15:25:03.73: [ 938]: <-- [10:AT+FTBC=0\r] > >Apr 12 15:25:03.85: [ 938]: --> [2:OK] > >Apr 12 15:25:03.85: [ 938]: <-- [10:AT+FBOR=0\r] > >Apr 12 15:25:03.97: [ 938]: --> [2:OK] > >Apr 12 15:25:03.97: [ 938]: <-- [13:AT+FPHCTO=30\r] > >Apr 12 15:25:04.09: [ 938]: --> [2:OK] > >Apr 12 15:25:04.09: [ 938]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r] > >Apr 12 15:25:04.22: [ 938]: --> [2:OK] > >Apr 12 15:25:04.22: [ 938]: <-- [26:AT+FLID="EkenbergHylafax"\r] > >Apr 12 15:25:04.35: [ 938]: --> [2:OK] > >Apr 12 15:25:04.35: [ 938]: DIAL 7043887 > >Apr 12 15:25:04.35: [ 938]: <-- [12:ATDT7043887\r] > >Apr 12 15:25:25.76: [ 938]: --> [5:+FCON] > >Apr 12 15:25:27.72: [ 938]: --> [29:+FCSI: " +46317043887"] > >Apr 12 15:25:27.72: [ 938]: REMOTE CSI "+46317043887" > >Apr 12 15:25:28.26: [ 938]: --> [22:+FDIS: 1,5,0,2,1,0,0,0] > >Apr 12 15:25:28.26: [ 938]: --> [2:OK] > >Apr 12 15:25:28.26: [ 938]: REMOTE best rate 14400 bit/s > >Apr 12 15:25:28.26: [ 938]: REMOTE max page width 1728 pixels in 215 mm > >Apr 12 15:25:28.26: [ 938]: REMOTE max unlimited page length > >Apr 12 15:25:28.26: [ 938]: REMOTE best vres 7.7 line/mm > >Apr 12 15:25:28.26: [ 938]: REMOTE best format 2-D MR > >Apr 12 15:25:28.26: [ 938]: REMOTE best 0 ms/scanline > >Apr 12 15:25:28.26: [ 938]: USE 14400 bit/s > >Apr 12 15:25:28.26: [ 938]: USE 0 ms/scanline > >Apr 12 15:25:28.26: [ 938]: SEND file "docq/doc7.ps;30" > >Apr 12 15:25:28.26: [ 938]: USE page width 1728 pixels in 215 mm > >Apr 12 15:25:28.26: [ 938]: USE unlimited page length > >Apr 12 15:25:28.26: [ 938]: USE 3.85 line/mm > >Apr 12 15:25:28.26: [ 938]: USE 1-D MR > >Apr 12 15:25:28.26: [ 938]: <-- [24:AT+FDIS=0,5,0,2,0,0,0,0\r] > >Apr 12 15:25:28.39: [ 938]: --> [2:OK] > >Apr 12 15:25:28.39: [ 938]: <-- [7:AT+FDT\r] > >Apr 12 15:25:35.85: [ 938]: --> [22:+FDCS: 0,5,0,2,0,0,0,0] > >Apr 12 15:25:35.85: [ 938]: --> [7:CONNECT] > >Apr 12 15:25:35.85: [ 938]: SEND wait for XON > >Apr 12 15:25:35.85: [ 938]: --> [1:] > >Apr 12 15:25:35.85: [ 938]: SEND begin page > >Apr 12 15:25:35.85: [ 938]: <-- data [1028] > >Apr 12 15:25:35.85: [ 938]: <-- data [1028] > >Apr 12 15:25:35.85: [ 938]: <-- data [1030] > >Apr 12 15:25:35.85: [ 938]: <-- data [1026] > >Apr 12 15:25:36.86: [ 938]: <-- data [1027] > >Apr 12 15:25:36.86: [ 938]: <-- data [1025] > >Apr 12 15:25:36.86: [ 938]: <-- data [1028] > >Apr 12 15:25:38.02: [ 938]: <-- data [1030] > >Apr 12 15:25:38.60: [ 938]: <-- data [1025] > >Apr 12 15:25:39.17: [ 938]: <-- data [478] > >Apr 12 15:25:39.17: [ 938]: SENT 9694 bytes of data > >Apr 12 15:25:39.17: [ 938]: <-- data [2] > >Apr 12 15:25:41.66: [ 938]: SEND end page > >Apr 12 15:25:42.49: [ 938]: --> [2:OK] > >Apr 12 15:25:42.49: [ 938]: SEND send EOP (no more pages or documents) > >Apr 12 15:25:42.49: [ 938]: <-- [9:AT+FET=2\r] > >Apr 12 15:25:45.26: [ 938]: --> [8:+FPTS: 1] > >Apr 12 15:25:46.83: [ 938]: --> [8:+FHNG: 0] > >Apr 12 15:25:46.83: [ 938]: REMOTE HANGUP: Normal and proper end of > >connection (code 0) > >Apr 12 15:25:46.83: [ 938]: SEND recv MCF (message confirmation) > >Apr 12 15:25:46.83: [ 938]: SEND FAX (00000006): FROM > >root@fax.ekenberg.se TO 7043887 (page 1 of 1 sent in 0:18) > >Apr 12 15:25:46.83: [ 938]: SEND FAX (00000006): FROM > >root@fax.ekenberg.se TO 7043887 (docq/doc7.ps;30 sent in 0:18) > >Apr 12 15:25:46.83: [ 938]: <-- [5:ATH0\r] > >Apr 12 15:25:47.59: [ 938]: --> [2:OK] > >Apr 12 15:25:47.59: [ 938]: SESSION END > > > > > > > >===== Logfile from trying to send 2 pages to a HP OfficeJet G85 > fax machine: > > > >Apr 12 15:32:48.15: [ 1171]: SESSION BEGIN 00000009 46317043887 > >Apr 12 15:32:48.15: [ 1171]: HylaFAX (tm) Version 4.1.1 > >Apr 12 15:32:48.15: [ 1171]: SEND FAX: JOB 7 DEST 7043887 COMMID > 00000009 > >DEVICE '/dev/modem' > >Apr 12 15:32:48.15: [ 1171]: DELAY 75 ms > >Apr 12 15:32:48.23: [ 1171]: DELAY 2600 ms > >Apr 12 15:32:50.83: [ 1171]: <-- [4:ATZ\r] > >Apr 12 15:32:50.92: [ 1171]: --> [2:OK] > >Apr 12 15:32:50.92: [ 1171]: DELAY 3000 ms > >Apr 12 15:32:53.92: [ 1171]: <-- [5:ATE0\r] > >Apr 12 15:32:53.93: [ 1171]: --> [4:ATE0] > >Apr 12 15:32:53.93: [ 1171]: --> [2:OK] > >Apr 12 15:32:53.93: [ 1171]: <-- [5:ATV1\r] > >Apr 12 15:32:53.95: [ 1171]: --> [2:OK] > >Apr 12 15:32:53.95: [ 1171]: <-- [5:ATQ0\r] > >Apr 12 15:32:53.97: [ 1171]: --> [2:OK] > >Apr 12 15:32:53.97: [ 1171]: <-- [7:ATS0=0\r] > >Apr 12 15:32:53.99: [ 1171]: --> [2:OK] > >Apr 12 15:32:53.99: [ 1171]: <-- [7:ATS8=2\r] > >Apr 12 15:32:54.01: [ 1171]: --> [2:OK] > >Apr 12 15:32:54.01: [ 1171]: <-- [8:ATS7=60\r] > >Apr 12 15:32:54.03: [ 1171]: --> [2:OK] > >Apr 12 15:32:54.03: [ 1171]: <-- [6:AT&K3\r] > >Apr 12 15:32:54.05: [ 1171]: --> [2:OK] > >Apr 12 15:32:54.05: [ 1171]: <-- [6:AT&D2\r] > >Apr 12 15:32:54.07: [ 1171]: --> [2:OK] > >Apr 12 15:32:54.07: [ 1171]: <-- [6:AT&C1\r] > >Apr 12 15:32:54.09: [ 1171]: --> [2:OK] > >Apr 12 15:32:54.09: [ 1171]: <-- [12:AT+FCLASS=1\r] > >Apr 12 15:32:54.12: [ 1171]: --> [2:OK] > >Apr 12 15:32:54.12: [ 1171]: <-- [5:ATM0\r] > >Apr 12 15:32:54.14: [ 1171]: --> [2:OK] > >Apr 12 15:32:54.14: [ 1171]: <-- [12:AT+FCLASS=1\r] > >Apr 12 15:32:54.27: [ 1171]: --> [2:OK] > >Apr 12 15:32:54.27: [ 1171]: DIAL 7043887 > >Apr 12 15:32:54.27: [ 1171]: <-- [12:ATDT7043887\r] > >Apr 12 15:33:15.92: [ 1171]: --> [7:CONNECT] > >Apr 12 15:33:16.95: [ 1171]: --> [2:OK] > >Apr 12 15:33:16.95: [ 1171]: REMOTE NSF "AD 00 36 20 00 00 00 00 6D" > >Apr 12 15:33:16.95: [ 1171]: NSF remote fax equipment: HP > >Apr 12 15:33:16.95: [ 1171]: <-- [9:AT+FRH=3\r] > >Apr 12 15:33:16.98: [ 1171]: --> [7:CONNECT] > >Apr 12 15:33:17.65: [ 1171]: --> [2:OK] > >Apr 12 15:33:17.65: [ 1171]: REMOTE CSI "+46317043887" > >Apr 12 15:33:17.65: [ 1171]: <-- [9:AT+FRH=3\r] > >Apr 12 15:33:17.68: [ 1171]: --> [7:CONNECT] > >Apr 12 15:33:18.07: [ 1171]: --> [2:OK] > >Apr 12 15:33:18.07: [ 1171]: REMOTE best rate 14400 bit/s > >Apr 12 15:33:18.07: [ 1171]: REMOTE max page width 1728 pixels in 215 mm > >Apr 12 15:33:18.07: [ 1171]: REMOTE max unlimited page length > >Apr 12 15:33:18.07: [ 1171]: REMOTE best vres 7.7 line/mm > >Apr 12 15:33:18.07: [ 1171]: REMOTE best format 2-D MMR > >Apr 12 15:33:18.07: [ 1171]: REMOTE supports T.30 Annex A, ECM > >Apr 12 15:33:18.07: [ 1171]: REMOTE best 0 ms/scanline > >Apr 12 15:33:18.07: [ 1171]: USE 14400 bit/s > >Apr 12 15:33:18.07: [ 1171]: USE 0 ms/scanline > >Apr 12 15:33:18.07: [ 1171]: SEND file "docq/doc10.ps;30" > >Apr 12 15:33:18.07: [ 1171]: USE page width 1728 pixels in 215 mm > >Apr 12 15:33:18.07: [ 1171]: USE unlimited page length > >Apr 12 15:33:18.07: [ 1171]: USE 3.85 line/mm > >Apr 12 15:33:18.07: [ 1171]: USE 1-D MR > >Apr 12 15:33:18.07: [ 1171]: SEND training at v.17 14400 bit/s > >Apr 12 15:33:18.07: [ 1171]: <-- [9:AT+FTH=3\r] > >Apr 12 15:33:18.11: [ 1171]: --> [7:CONNECT] > >Apr 12 15:33:18.11: [ 1171]: <-- data [23] > >Apr 12 15:33:18.11: [ 1171]: <-- data [2] > >Apr 12 15:33:19.89: [ 1171]: --> [7:CONNECT] > >Apr 12 15:33:19.89: [ 1171]: <-- data [6] > >Apr 12 15:33:19.89: [ 1171]: <-- data [2] > >Apr 12 15:33:20.35: [ 1171]: --> [2:OK] > >Apr 12 15:33:20.35: [ 1171]: <-- [9:AT+FTS=7\r] > >Apr 12 15:33:20.46: [ 1171]: --> [2:OK] > >Apr 12 15:33:20.46: [ 1171]: <-- [11:AT+FTM=145\r] > >Apr 12 15:33:20.50: [ 1171]: --> [7:CONNECT] > >Apr 12 15:33:20.50: [ 1171]: <-- data [1024] > >Apr 12 15:33:20.50: [ 1171]: <-- data [1024] > >Apr 12 15:33:20.50: [ 1171]: <-- data [652] > >Apr 12 15:33:20.50: [ 1171]: <-- data [2] > >Apr 12 15:33:23.85: [ 1171]: --> [2:OK] > >Apr 12 15:33:23.85: [ 1171]: <-- [9:AT+FRH=3\r] > >Apr 12 15:33:24.26: [ 1171]: --> [7:CONNECT] > >Apr 12 15:33:25.16: [ 1171]: --> [2:OK] > >Apr 12 15:33:25.16: [ 1171]: TRAINING succeeded > >Apr 12 15:33:25.16: [ 1171]: DELAY 75 ms > >Apr 12 15:33:25.24: [ 1171]: <-- [11:AT+FTM=146\r] > >Apr 12 15:33:25.28: [ 1171]: --> [7:CONNECT] > >Apr 12 15:33:25.28: [ 1171]: SEND begin page > >Apr 12 15:33:25.28: [ 1171]: <-- data [1029] > >Apr 12 15:33:25.28: [ 1171]: <-- data [1028] > >Apr 12 15:33:25.28: [ 1171]: <-- data [1028] > >Apr 12 15:33:25.28: [ 1171]: <-- data [1025] > >Apr 12 15:33:25.28: [ 1171]: <-- data [1027] > >Apr 12 15:33:25.96: [ 1171]: <-- data [1030] > >Apr 12 15:33:26.46: [ 1171]: <-- data [1030] > >Apr 12 15:33:27.46: [ 1171]: <-- data [1025] > >Apr 12 15:33:27.95: [ 1171]: <-- data [1028] > >Apr 12 15:33:28.46: [ 1171]: <-- data [1028] > >Apr 12 15:33:29.49: [ 1171]: <-- data [1032] > >Apr 12 15:33:29.99: [ 1171]: <-- data [1024] > >Apr 12 15:33:30.49: [ 1171]: <-- data [1027] > >Apr 12 15:33:30.99: [ 1171]: <-- data [1029] > >Apr 12 15:33:32.03: [ 1171]: <-- data [1030] > >Apr 12 15:33:32.53: [ 1171]: <-- data [1026] > >Apr 12 15:33:33.04: [ 1171]: <-- data [1026] > >Apr 12 15:33:33.54: [ 1171]: <-- data [1028] > >Apr 12 15:33:34.54: [ 1171]: <-- data [1027] > >Apr 12 15:33:35.05: [ 1171]: <-- data [1030] > >Apr 12 15:33:35.55: [ 1171]: <-- data [1028] > >Apr 12 15:33:36.55: [ 1171]: <-- data [1031] > >Apr 12 15:33:37.05: [ 1171]: <-- data [998] > >Apr 12 15:33:37.57: [ 1171]: SENT 23525 bytes of data > >Apr 12 15:33:37.57: [ 1171]: SEND 1D RTC > >Apr 12 15:33:37.57: [ 1171]: <-- data [29] > >Apr 12 15:33:37.57: [ 1171]: <-- data [2] > >Apr 12 15:33:37.57: [ 1171]: SEND end page > >Apr 12 15:33:40.46: [ 1171]: --> [2:OK] > >Apr 12 15:33:40.46: [ 1171]: <-- [9:AT+FTS=7\r] > >Apr 12 15:33:40.55: [ 1171]: --> [2:OK] > >Apr 12 15:33:40.55: [ 1171]: SEND send MPS (more pages, same document) > >Apr 12 15:33:40.55: [ 1171]: <-- [9:AT+FTH=3\r] > >Apr 12 15:33:40.59: [ 1171]: --> [7:CONNECT] > >Apr 12 15:33:40.59: [ 1171]: <-- data [3] > >Apr 12 15:33:40.59: [ 1171]: <-- data [2] > >Apr 12 15:33:41.89: [ 1171]: --> [2:OK] > >Apr 12 15:33:41.89: [ 1171]: <-- [9:AT+FRH=3\r] > >Apr 12 15:33:44.99: [ 1171]: --> [0:] > >Apr 12 15:33:44.99: [ 1171]: MODEM <Empty line> > >Apr 12 15:33:44.99: [ 1171]: <-- data [1] > >Apr 12 15:33:45.06: [ 1171]: --> [2:OK] > >Apr 12 15:33:45.06: [ 1171]: SEND send MPS (more pages, same document) > >Apr 12 15:33:45.06: [ 1171]: <-- [9:AT+FTH=3\r] > >Apr 12 15:33:45.10: [ 1171]: --> [7:CONNECT] > >Apr 12 15:33:45.10: [ 1171]: <-- data [3] > >Apr 12 15:33:45.10: [ 1171]: <-- data [2] > >Apr 12 15:33:46.43: [ 1171]: --> [2:OK] > >Apr 12 15:33:46.43: [ 1171]: <-- [9:AT+FRH=3\r] > >Apr 12 15:33:49.53: [ 1171]: --> [0:] > >Apr 12 15:33:49.53: [ 1171]: MODEM <Empty line> > >Apr 12 15:33:49.53: [ 1171]: <-- data [1] > >Apr 12 15:33:49.60: [ 1171]: --> [2:OK] > >Apr 12 15:33:49.60: [ 1171]: SEND send MPS (more pages, same document) > >Apr 12 15:33:49.60: [ 1171]: <-- [9:AT+FTH=3\r] > >Apr 12 15:33:49.64: [ 1171]: --> [7:CONNECT] > >Apr 12 15:33:49.64: [ 1171]: <-- data [3] > >Apr 12 15:33:49.64: [ 1171]: <-- data [2] > >Apr 12 15:33:50.96: [ 1171]: --> [2:OK] > >Apr 12 15:33:50.96: [ 1171]: <-- [9:AT+FRH=3\r] > >Apr 12 15:33:54.06: [ 1171]: --> [0:] > >Apr 12 15:33:54.06: [ 1171]: MODEM <Empty line> > >Apr 12 15:33:54.06: [ 1171]: <-- data [1] > >Apr 12 15:33:54.13: [ 1171]: --> [2:OK] > >Apr 12 15:33:54.13: [ 1171]: No response to MPS or EOP repeated 3 tries > >Apr 12 15:33:54.13: [ 1171]: <-- [9:AT+FTH=3\r] > >Apr 12 15:33:54.17: [ 1171]: --> [7:CONNECT] > >Apr 12 15:33:54.17: [ 1171]: <-- data [3] > >Apr 12 15:33:54.17: [ 1171]: <-- data [2] > >Apr 12 15:33:55.47: [ 1171]: --> [2:OK] > >Apr 12 15:33:55.47: [ 1171]: <-- [5:ATH0\r] > >Apr 12 15:33:56.35: [ 1171]: --> [2:OK] > >Apr 12 15:33:56.35: [ 1171]: SESSION END > > > > > > > >____________________ HylaFAX(tm) Users Mailing List > _______________________ > > To subscribe/unsubscribe, click > http://lists.hylafax.org/cgi-bin/lsg2.cgi > > On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org > < /dev/null > > -------------------------------------- > Jeff Herring / jeffh@sldsi.com > Seacoast Laboratory Data Systems, Inc. > Voice: 603 431 4114 x14 > FAX: 603 431 2112 > -------------------------------------- > > > ____________________ HylaFAX(tm) Users Mailing List > _______________________ > To subscribe/unsubscribe, click > http://lists.hylafax.org/cgi-bin/lsg2.cgi > On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < > /dev/null > ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
- References:
- Prev by Date: Re: [hylafax-users] Rockwell / Conexant: "No response to MPS ..." and other problems
- Next by Date: Re: [hylafax-users] Rockwell / Conexant: "No response to MPS ..." and other problems
- Previous by thread: Re: [hylafax-users] Rockwell / Conexant: "No response to MPS ..." and other problems
- Next by thread: Re: [hylafax-users] Rockwell / Conexant: "No response to MPS ..." and other problems
- Index(es):
Project hosted by iFAX Solutions