Re: [hylafax-users] Rockwell / Conexant: "No response to MPS ..." and other problems

[Jeff Herring <jeffh@sldsi.com>]

On the sendfax command line try specifying the "-1" option to force 1D 
encoding.

This may be appropriate only for the HP device however...

-Jeff H.

At 06:06 PM 4/12/02 +0200, Johan Ekenberg wrote:
>Hi!
>
>I just built and installed Hylafax 4.1.1 on a Slackware 8.0 Linux system. 
>The modem is branded "Bestmatic", and it seems to have a Rockwell/Conexant 
>chipset. Installation and configuration went smoothly until I tried to 
>send faxes. I'm trying to fax to a HP OfficeJet G85 Fax, but it won't work:
>
>   - If I send only one page everything looks ok on the Hylafax-side. On 
> the HP side the fax seems to be received ok but then it's never printed (!!).
>   - If I send two or more pages I get the infamous "No response to MPS or 
> EOP repeated 3 times".
>   - I've tried to use both Class 1 and Class 2, but no difference.
>
>I'm a newbie when it comes to (Hyla)faxes and modems so I don't exactly 
>know what info to send. Below is:
>   a) How faxaddmodem identifies the modem
>   b) From config.modem when trying Class 1
>   c) From config.modem when trying Class 2
>   d) The output from "probemodem"
>   e) The logfile from sending 1 page. Everything seems to work well, but 
> the fax is never printed on the receiving side (HP OfficeJet). If this is 
> a HP problem I've never experienced it or heard about it before.
>   f) The logfile from sending 2 pages. No response to MPS... etc.
>
>Please help me, I really want to use Hylafax! If you need any more 
>information I'll be happy to provide it.
>
>Regards,
>/Johan Ekenberg - Sweden
>
>------ Logs and info ------
>
>===== faxaddmodem gives this identification of the chipset:
>
>Hmm, this looks like a Class 1 modem.
>Product code (ATI0) is "56000".
>Other information (ATI3) is "P2107-V90".
>Modem manufacturer is "Rockwell/Conexant".
>Modem model is "AC/K56".
>
>
>===== Class 1 config.modem
># Configuration for a Rockwell RC288DPi-based Class 1 modem.
>#    Hayes Optima 28800         firmware rev ???
>#    Microcom DeskPorte 28.8S   firmware rev V1.100K-V34_DS
>#    PPI PM288FXMT              firmware rev 1.57
>  ...
>ModemType:              Class1          # use this to supply a hint
>ModemRate:              38400           # rate for DCE-DTE communication
>ModemFlowControl:       rtscts          # default
>#
>ModemNoFlowCmd:         AT&K0           # setup no flow control
>ModemHardFlowCmd:       AT&K3           # setup hardware flow control
>ModemSoftFlowCmd:       AT&K4           # setup software flow control
>ModemSetupDTRCmd:       AT&D2           # setup so DTR drop resets modem
>ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier 
>(or not)#
>ModemMfrQueryCmd:       !Rockwell
>ModemModelQueryCmd:     !RC288DPi
>ModemRevQueryCmd:       ATI3            # product information
>#
>ModemDialCmd:           ATDT%s          # T for tone dialing
>
>
>
>===== Class 2 config.modem:
># Configuration for a Rockwell AC/K56-based Class 2 modem.
># based upon work of Mark J. Bailey, Jonathan Mau and Glenn Burkhardt.
>#    Multitech MT5600ZDX
>#    Diamond Multimedia SupraExpress 56e PRO
>#    Zoom Telephonics 56Kx
># (and others)
>  ...
>ModemType:              Class2          # use class 2 interface
>ModemRate:              38400
>ModemFlowControl:       xonxoff         # default
>ModemWaitForConnect:    yes             # wait for CONNECT on answer
>#
>#ModemResetCmds:        AT&F2           # what you want for a Supra
>ModemNoFlowCmd:         AT&K            # disable flow control cmd
>ModemHardFlowCmd:       AT&K3           # hardware flow control cmd
>ModemSoftFlowCmd:       AT&K4           # software flow control cmd
>ModemSetupDTRCmd:       AT&D3           # DTR off causes modem to reset
>ModemSetupDCDCmd:       AT&C1           # DCD follows carrier
>ModemSetupAACmd:        AT+FCLASS=0;+FAA=1 # enable in class 0
>#
>ModemSendFillOrder:     LSB2MSB         # as expected
>ModemRecvFillOrder:     MSB2LSB         # opposite of what makes sense
>Class2RecvDataTrigger:  "\022"          # a la 2388-B
>
>
>
>===== probemodem:
>
>Probing for best speed to talk to modem: 38400 OK.
>
>This looks like a Class 1 modem.
>
>ATI0    RESULT = "OK"   RESPONSE = "56000"
>ATI1    RESULT = "OK"   RESPONSE = "030"
>ATI2    RESULT = "OK"   RESPONSE = "OK"
>ATI3    RESULT = "OK"   RESPONSE = "P2107-V90"
>
>Class 1 stuff...
>
>AT+FCLASS=?     RESULT = "OK"   RESPONSE = "0,1,1.0,2,8,10"
>AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
>AT+FCLASS=0     RESULT = "OK"   RESPONSE = "OK"
>AT+FCLASS=1     RESULT = "OK"   RESPONSE = "OK"
>AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
>AT+FJUNK=?      RESULT = "ERROR"        RESPONSE = "ERROR"
>AT+FJUNK?       RESULT = "ERROR"        RESPONSE = "ERROR"
>AT+FAA=?        RESULT = "ERROR"        RESPONSE = "ERROR"
>AT+FAA? RESULT = "ERROR"        RESPONSE = "ERROR"
>AT+FAE=?        RESULT = "OK"   RESPONSE = "(0,1)"
>AT+FAE? RESULT = "OK"   RESPONSE = "0"
>AT+FTH=?        RESULT = "OK"   RESPONSE = 
>"3,24,48,72,73,74,96,97,98,121,122,145,146"
>AT+FRH=?        RESULT = "OK"   RESPONSE = 
>"3,24,48,72,73,74,96,97,98,121,122,145,146"
>AT+FTM=?        RESULT = "OK"   RESPONSE = 
>"3,24,48,72,73,74,96,97,98,121,122,145,146"
>AT+FRM=?        RESULT = "OK"   RESPONSE = 
>"3,24,48,72,73,74,96,97,98,121,122,145,146"
>AT+FTS=?        RESULT = "ERROR"        RESPONSE = "ERROR"
>AT+FRS=?        RESULT = "ERROR"        RESPONSE = "ERROR"
>
>
>
>===== Logfile from trying to send 1 page to a HP OfficeJet G85 Fax Machine 
>(where everything looks ok when sending, but the fax is never printed (!?)
>
>Apr 12 15:24:57.52: [  938]: SESSION BEGIN 00000006 46317043887
>Apr 12 15:24:57.52: [  938]: HylaFAX (tm) Version 4.1.1
>Apr 12 15:24:57.52: [  938]: SEND FAX: JOB 4 DEST 7043887 COMMID 00000006 
>DEVICE '/dev/modem'
>Apr 12 15:24:57.52: [  938]: DELAY 75 ms
>Apr 12 15:24:57.60: [  938]: DELAY 2600 ms
>Apr 12 15:25:00.20: [  938]: <-- [4:ATZ\r]
>Apr 12 15:25:00.29: [  938]: --> [2:OK]
>Apr 12 15:25:00.29: [  938]: DELAY 3000 ms
>Apr 12 15:25:03.29: [  938]: <-- [5:ATE0\r]
>Apr 12 15:25:03.30: [  938]: --> [4:ATE0]
>Apr 12 15:25:03.30: [  938]: --> [2:OK]
>Apr 12 15:25:03.30: [  938]: <-- [5:ATV1\r]
>Apr 12 15:25:03.32: [  938]: --> [2:OK]
>Apr 12 15:25:03.32: [  938]: <-- [5:ATQ0\r]
>Apr 12 15:25:03.34: [  938]: --> [2:OK]
>Apr 12 15:25:03.34: [  938]: <-- [7:ATS0=0\r]
>Apr 12 15:25:03.36: [  938]: --> [2:OK]
>Apr 12 15:25:03.36: [  938]: <-- [7:ATS8=2\r]
>Apr 12 15:25:03.38: [  938]: --> [2:OK]
>Apr 12 15:25:03.38: [  938]: <-- [8:ATS7=60\r]
>Apr 12 15:25:03.40: [  938]: --> [2:OK]
>Apr 12 15:25:03.40: [  938]: <-- [6:AT&K4\r]
>Apr 12 15:25:03.42: [  938]: --> [2:OK]
>Apr 12 15:25:03.42: [  938]: <-- [6:AT&D3\r]
>Apr 12 15:25:03.45: [  938]: --> [2:OK]
>Apr 12 15:25:03.45: [  938]: <-- [6:AT&C1\r]
>Apr 12 15:25:03.47: [  938]: --> [2:OK]
>Apr 12 15:25:03.47: [  938]: <-- [12:AT+FCLASS=2\r]
>Apr 12 15:25:03.49: [  938]: --> [2:OK]
>Apr 12 15:25:03.49: [  938]: <-- [10:AT+FTBC=0\r]
>Apr 12 15:25:03.51: [  938]: --> [2:OK]
>Apr 12 15:25:03.51: [  938]: <-- [10:AT+FBOR=0\r]
>Apr 12 15:25:03.53: [  938]: --> [2:OK]
>Apr 12 15:25:03.53: [  938]: <-- [13:AT+FPHCTO=30\r]
>Apr 12 15:25:03.56: [  938]: --> [2:OK]
>Apr 12 15:25:03.56: [  938]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
>Apr 12 15:25:03.59: [  938]: --> [2:OK]
>Apr 12 15:25:03.59: [  938]: <-- [5:ATM0\r]
>Apr 12 15:25:03.61: [  938]: --> [2:OK]
>Apr 12 15:25:03.61: [  938]: <-- [12:AT+FCLASS=2\r]
>Apr 12 15:25:03.73: [  938]: --> [2:OK]
>Apr 12 15:25:03.73: [  938]: <-- [10:AT+FTBC=0\r]
>Apr 12 15:25:03.85: [  938]: --> [2:OK]
>Apr 12 15:25:03.85: [  938]: <-- [10:AT+FBOR=0\r]
>Apr 12 15:25:03.97: [  938]: --> [2:OK]
>Apr 12 15:25:03.97: [  938]: <-- [13:AT+FPHCTO=30\r]
>Apr 12 15:25:04.09: [  938]: --> [2:OK]
>Apr 12 15:25:04.09: [  938]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
>Apr 12 15:25:04.22: [  938]: --> [2:OK]
>Apr 12 15:25:04.22: [  938]: <-- [26:AT+FLID="EkenbergHylafax"\r]
>Apr 12 15:25:04.35: [  938]: --> [2:OK]
>Apr 12 15:25:04.35: [  938]: DIAL 7043887
>Apr 12 15:25:04.35: [  938]: <-- [12:ATDT7043887\r]
>Apr 12 15:25:25.76: [  938]: --> [5:+FCON]
>Apr 12 15:25:27.72: [  938]: --> [29:+FCSI: "        +46317043887"]
>Apr 12 15:25:27.72: [  938]: REMOTE CSI "+46317043887"
>Apr 12 15:25:28.26: [  938]: --> [22:+FDIS: 1,5,0,2,1,0,0,0]
>Apr 12 15:25:28.26: [  938]: --> [2:OK]
>Apr 12 15:25:28.26: [  938]: REMOTE best rate 14400 bit/s
>Apr 12 15:25:28.26: [  938]: REMOTE max page width 1728 pixels in 215 mm
>Apr 12 15:25:28.26: [  938]: REMOTE max unlimited page length
>Apr 12 15:25:28.26: [  938]: REMOTE best vres 7.7 line/mm
>Apr 12 15:25:28.26: [  938]: REMOTE best format 2-D MR
>Apr 12 15:25:28.26: [  938]: REMOTE best 0 ms/scanline
>Apr 12 15:25:28.26: [  938]: USE 14400 bit/s
>Apr 12 15:25:28.26: [  938]: USE 0 ms/scanline
>Apr 12 15:25:28.26: [  938]: SEND file "docq/doc7.ps;30"
>Apr 12 15:25:28.26: [  938]: USE page width 1728 pixels in 215 mm
>Apr 12 15:25:28.26: [  938]: USE unlimited page length
>Apr 12 15:25:28.26: [  938]: USE 3.85 line/mm
>Apr 12 15:25:28.26: [  938]: USE 1-D MR
>Apr 12 15:25:28.26: [  938]: <-- [24:AT+FDIS=0,5,0,2,0,0,0,0\r]
>Apr 12 15:25:28.39: [  938]: --> [2:OK]
>Apr 12 15:25:28.39: [  938]: <-- [7:AT+FDT\r]
>Apr 12 15:25:35.85: [  938]: --> [22:+FDCS: 0,5,0,2,0,0,0,0]
>Apr 12 15:25:35.85: [  938]: --> [7:CONNECT]
>Apr 12 15:25:35.85: [  938]: SEND wait for XON
>Apr 12 15:25:35.85: [  938]: --> [1:]
>Apr 12 15:25:35.85: [  938]: SEND begin page
>Apr 12 15:25:35.85: [  938]: <-- data [1028]
>Apr 12 15:25:35.85: [  938]: <-- data [1028]
>Apr 12 15:25:35.85: [  938]: <-- data [1030]
>Apr 12 15:25:35.85: [  938]: <-- data [1026]
>Apr 12 15:25:36.86: [  938]: <-- data [1027]
>Apr 12 15:25:36.86: [  938]: <-- data [1025]
>Apr 12 15:25:36.86: [  938]: <-- data [1028]
>Apr 12 15:25:38.02: [  938]: <-- data [1030]
>Apr 12 15:25:38.60: [  938]: <-- data [1025]
>Apr 12 15:25:39.17: [  938]: <-- data [478]
>Apr 12 15:25:39.17: [  938]: SENT 9694 bytes of data
>Apr 12 15:25:39.17: [  938]: <-- data [2]
>Apr 12 15:25:41.66: [  938]: SEND end page
>Apr 12 15:25:42.49: [  938]: --> [2:OK]
>Apr 12 15:25:42.49: [  938]: SEND send EOP (no more pages or documents)
>Apr 12 15:25:42.49: [  938]: <-- [9:AT+FET=2\r]
>Apr 12 15:25:45.26: [  938]: --> [8:+FPTS: 1]
>Apr 12 15:25:46.83: [  938]: --> [8:+FHNG: 0]
>Apr 12 15:25:46.83: [  938]: REMOTE HANGUP: Normal and proper end of 
>connection (code 0)
>Apr 12 15:25:46.83: [  938]: SEND recv MCF (message confirmation)
>Apr 12 15:25:46.83: [  938]: SEND FAX (00000006): FROM 
>root@fax.ekenberg.se TO 7043887 (page 1 of 1 sent in 0:18)
>Apr 12 15:25:46.83: [  938]: SEND FAX (00000006): FROM 
>root@fax.ekenberg.se TO 7043887 (docq/doc7.ps;30 sent in 0:18)
>Apr 12 15:25:46.83: [  938]: <-- [5:ATH0\r]
>Apr 12 15:25:47.59: [  938]: --> [2:OK]
>Apr 12 15:25:47.59: [  938]: SESSION END
>
>
>
>===== Logfile from trying to send 2 pages to a HP OfficeJet G85 fax machine:
>
>Apr 12 15:32:48.15: [ 1171]: SESSION BEGIN 00000009 46317043887
>Apr 12 15:32:48.15: [ 1171]: HylaFAX (tm) Version 4.1.1
>Apr 12 15:32:48.15: [ 1171]: SEND FAX: JOB 7 DEST 7043887 COMMID 00000009 
>DEVICE '/dev/modem'
>Apr 12 15:32:48.15: [ 1171]: DELAY 75 ms
>Apr 12 15:32:48.23: [ 1171]: DELAY 2600 ms
>Apr 12 15:32:50.83: [ 1171]: <-- [4:ATZ\r]
>Apr 12 15:32:50.92: [ 1171]: --> [2:OK]
>Apr 12 15:32:50.92: [ 1171]: DELAY 3000 ms
>Apr 12 15:32:53.92: [ 1171]: <-- [5:ATE0\r]
>Apr 12 15:32:53.93: [ 1171]: --> [4:ATE0]
>Apr 12 15:32:53.93: [ 1171]: --> [2:OK]
>Apr 12 15:32:53.93: [ 1171]: <-- [5:ATV1\r]
>Apr 12 15:32:53.95: [ 1171]: --> [2:OK]
>Apr 12 15:32:53.95: [ 1171]: <-- [5:ATQ0\r]
>Apr 12 15:32:53.97: [ 1171]: --> [2:OK]
>Apr 12 15:32:53.97: [ 1171]: <-- [7:ATS0=0\r]
>Apr 12 15:32:53.99: [ 1171]: --> [2:OK]
>Apr 12 15:32:53.99: [ 1171]: <-- [7:ATS8=2\r]
>Apr 12 15:32:54.01: [ 1171]: --> [2:OK]
>Apr 12 15:32:54.01: [ 1171]: <-- [8:ATS7=60\r]
>Apr 12 15:32:54.03: [ 1171]: --> [2:OK]
>Apr 12 15:32:54.03: [ 1171]: <-- [6:AT&K3\r]
>Apr 12 15:32:54.05: [ 1171]: --> [2:OK]
>Apr 12 15:32:54.05: [ 1171]: <-- [6:AT&D2\r]
>Apr 12 15:32:54.07: [ 1171]: --> [2:OK]
>Apr 12 15:32:54.07: [ 1171]: <-- [6:AT&C1\r]
>Apr 12 15:32:54.09: [ 1171]: --> [2:OK]
>Apr 12 15:32:54.09: [ 1171]: <-- [12:AT+FCLASS=1\r]
>Apr 12 15:32:54.12: [ 1171]: --> [2:OK]
>Apr 12 15:32:54.12: [ 1171]: <-- [5:ATM0\r]
>Apr 12 15:32:54.14: [ 1171]: --> [2:OK]
>Apr 12 15:32:54.14: [ 1171]: <-- [12:AT+FCLASS=1\r]
>Apr 12 15:32:54.27: [ 1171]: --> [2:OK]
>Apr 12 15:32:54.27: [ 1171]: DIAL 7043887
>Apr 12 15:32:54.27: [ 1171]: <-- [12:ATDT7043887\r]
>Apr 12 15:33:15.92: [ 1171]: --> [7:CONNECT]
>Apr 12 15:33:16.95: [ 1171]: --> [2:OK]
>Apr 12 15:33:16.95: [ 1171]: REMOTE NSF "AD 00 36 20 00 00 00 00 6D"
>Apr 12 15:33:16.95: [ 1171]: NSF remote fax equipment: HP
>Apr 12 15:33:16.95: [ 1171]: <-- [9:AT+FRH=3\r]
>Apr 12 15:33:16.98: [ 1171]: --> [7:CONNECT]
>Apr 12 15:33:17.65: [ 1171]: --> [2:OK]
>Apr 12 15:33:17.65: [ 1171]: REMOTE CSI "+46317043887"
>Apr 12 15:33:17.65: [ 1171]: <-- [9:AT+FRH=3\r]
>Apr 12 15:33:17.68: [ 1171]: --> [7:CONNECT]
>Apr 12 15:33:18.07: [ 1171]: --> [2:OK]
>Apr 12 15:33:18.07: [ 1171]: REMOTE best rate 14400 bit/s
>Apr 12 15:33:18.07: [ 1171]: REMOTE max page width 1728 pixels in 215 mm
>Apr 12 15:33:18.07: [ 1171]: REMOTE max unlimited page length
>Apr 12 15:33:18.07: [ 1171]: REMOTE best vres 7.7 line/mm
>Apr 12 15:33:18.07: [ 1171]: REMOTE best format 2-D MMR
>Apr 12 15:33:18.07: [ 1171]: REMOTE supports T.30 Annex A, ECM
>Apr 12 15:33:18.07: [ 1171]: REMOTE best 0 ms/scanline
>Apr 12 15:33:18.07: [ 1171]: USE 14400 bit/s
>Apr 12 15:33:18.07: [ 1171]: USE 0 ms/scanline
>Apr 12 15:33:18.07: [ 1171]: SEND file "docq/doc10.ps;30"
>Apr 12 15:33:18.07: [ 1171]: USE page width 1728 pixels in 215 mm
>Apr 12 15:33:18.07: [ 1171]: USE unlimited page length
>Apr 12 15:33:18.07: [ 1171]: USE 3.85 line/mm
>Apr 12 15:33:18.07: [ 1171]: USE 1-D MR
>Apr 12 15:33:18.07: [ 1171]: SEND training at v.17 14400 bit/s
>Apr 12 15:33:18.07: [ 1171]: <-- [9:AT+FTH=3\r]
>Apr 12 15:33:18.11: [ 1171]: --> [7:CONNECT]
>Apr 12 15:33:18.11: [ 1171]: <-- data [23]
>Apr 12 15:33:18.11: [ 1171]: <-- data [2]
>Apr 12 15:33:19.89: [ 1171]: --> [7:CONNECT]
>Apr 12 15:33:19.89: [ 1171]: <-- data [6]
>Apr 12 15:33:19.89: [ 1171]: <-- data [2]
>Apr 12 15:33:20.35: [ 1171]: --> [2:OK]
>Apr 12 15:33:20.35: [ 1171]: <-- [9:AT+FTS=7\r]
>Apr 12 15:33:20.46: [ 1171]: --> [2:OK]
>Apr 12 15:33:20.46: [ 1171]: <-- [11:AT+FTM=145\r]
>Apr 12 15:33:20.50: [ 1171]: --> [7:CONNECT]
>Apr 12 15:33:20.50: [ 1171]: <-- data [1024]
>Apr 12 15:33:20.50: [ 1171]: <-- data [1024]
>Apr 12 15:33:20.50: [ 1171]: <-- data [652]
>Apr 12 15:33:20.50: [ 1171]: <-- data [2]
>Apr 12 15:33:23.85: [ 1171]: --> [2:OK]
>Apr 12 15:33:23.85: [ 1171]: <-- [9:AT+FRH=3\r]
>Apr 12 15:33:24.26: [ 1171]: --> [7:CONNECT]
>Apr 12 15:33:25.16: [ 1171]: --> [2:OK]
>Apr 12 15:33:25.16: [ 1171]: TRAINING succeeded
>Apr 12 15:33:25.16: [ 1171]: DELAY 75 ms
>Apr 12 15:33:25.24: [ 1171]: <-- [11:AT+FTM=146\r]
>Apr 12 15:33:25.28: [ 1171]: --> [7:CONNECT]
>Apr 12 15:33:25.28: [ 1171]: SEND begin page
>Apr 12 15:33:25.28: [ 1171]: <-- data [1029]
>Apr 12 15:33:25.28: [ 1171]: <-- data [1028]
>Apr 12 15:33:25.28: [ 1171]: <-- data [1028]
>Apr 12 15:33:25.28: [ 1171]: <-- data [1025]
>Apr 12 15:33:25.28: [ 1171]: <-- data [1027]
>Apr 12 15:33:25.96: [ 1171]: <-- data [1030]
>Apr 12 15:33:26.46: [ 1171]: <-- data [1030]
>Apr 12 15:33:27.46: [ 1171]: <-- data [1025]
>Apr 12 15:33:27.95: [ 1171]: <-- data [1028]
>Apr 12 15:33:28.46: [ 1171]: <-- data [1028]
>Apr 12 15:33:29.49: [ 1171]: <-- data [1032]
>Apr 12 15:33:29.99: [ 1171]: <-- data [1024]
>Apr 12 15:33:30.49: [ 1171]: <-- data [1027]
>Apr 12 15:33:30.99: [ 1171]: <-- data [1029]
>Apr 12 15:33:32.03: [ 1171]: <-- data [1030]
>Apr 12 15:33:32.53: [ 1171]: <-- data [1026]
>Apr 12 15:33:33.04: [ 1171]: <-- data [1026]
>Apr 12 15:33:33.54: [ 1171]: <-- data [1028]
>Apr 12 15:33:34.54: [ 1171]: <-- data [1027]
>Apr 12 15:33:35.05: [ 1171]: <-- data [1030]
>Apr 12 15:33:35.55: [ 1171]: <-- data [1028]
>Apr 12 15:33:36.55: [ 1171]: <-- data [1031]
>Apr 12 15:33:37.05: [ 1171]: <-- data [998]
>Apr 12 15:33:37.57: [ 1171]: SENT 23525 bytes of data
>Apr 12 15:33:37.57: [ 1171]: SEND 1D RTC
>Apr 12 15:33:37.57: [ 1171]: <-- data [29]
>Apr 12 15:33:37.57: [ 1171]: <-- data [2]
>Apr 12 15:33:37.57: [ 1171]: SEND end page
>Apr 12 15:33:40.46: [ 1171]: --> [2:OK]
>Apr 12 15:33:40.46: [ 1171]: <-- [9:AT+FTS=7\r]
>Apr 12 15:33:40.55: [ 1171]: --> [2:OK]
>Apr 12 15:33:40.55: [ 1171]: SEND send MPS (more pages, same document)
>Apr 12 15:33:40.55: [ 1171]: <-- [9:AT+FTH=3\r]
>Apr 12 15:33:40.59: [ 1171]: --> [7:CONNECT]
>Apr 12 15:33:40.59: [ 1171]: <-- data [3]
>Apr 12 15:33:40.59: [ 1171]: <-- data [2]
>Apr 12 15:33:41.89: [ 1171]: --> [2:OK]
>Apr 12 15:33:41.89: [ 1171]: <-- [9:AT+FRH=3\r]
>Apr 12 15:33:44.99: [ 1171]: --> [0:]
>Apr 12 15:33:44.99: [ 1171]: MODEM <Empty line>
>Apr 12 15:33:44.99: [ 1171]: <-- data [1]
>Apr 12 15:33:45.06: [ 1171]: --> [2:OK]
>Apr 12 15:33:45.06: [ 1171]: SEND send MPS (more pages, same document)
>Apr 12 15:33:45.06: [ 1171]: <-- [9:AT+FTH=3\r]
>Apr 12 15:33:45.10: [ 1171]: --> [7:CONNECT]
>Apr 12 15:33:45.10: [ 1171]: <-- data [3]
>Apr 12 15:33:45.10: [ 1171]: <-- data [2]
>Apr 12 15:33:46.43: [ 1171]: --> [2:OK]
>Apr 12 15:33:46.43: [ 1171]: <-- [9:AT+FRH=3\r]
>Apr 12 15:33:49.53: [ 1171]: --> [0:]
>Apr 12 15:33:49.53: [ 1171]: MODEM <Empty line>
>Apr 12 15:33:49.53: [ 1171]: <-- data [1]
>Apr 12 15:33:49.60: [ 1171]: --> [2:OK]
>Apr 12 15:33:49.60: [ 1171]: SEND send MPS (more pages, same document)
>Apr 12 15:33:49.60: [ 1171]: <-- [9:AT+FTH=3\r]
>Apr 12 15:33:49.64: [ 1171]: --> [7:CONNECT]
>Apr 12 15:33:49.64: [ 1171]: <-- data [3]
>Apr 12 15:33:49.64: [ 1171]: <-- data [2]
>Apr 12 15:33:50.96: [ 1171]: --> [2:OK]
>Apr 12 15:33:50.96: [ 1171]: <-- [9:AT+FRH=3\r]
>Apr 12 15:33:54.06: [ 1171]: --> [0:]
>Apr 12 15:33:54.06: [ 1171]: MODEM <Empty line>
>Apr 12 15:33:54.06: [ 1171]: <-- data [1]
>Apr 12 15:33:54.13: [ 1171]: --> [2:OK]
>Apr 12 15:33:54.13: [ 1171]: No response to MPS or EOP repeated 3 tries
>Apr 12 15:33:54.13: [ 1171]: <-- [9:AT+FTH=3\r]
>Apr 12 15:33:54.17: [ 1171]: --> [7:CONNECT]
>Apr 12 15:33:54.17: [ 1171]: <-- data [3]
>Apr 12 15:33:54.17: [ 1171]: <-- data [2]
>Apr 12 15:33:55.47: [ 1171]: --> [2:OK]
>Apr 12 15:33:55.47: [ 1171]: <-- [5:ATH0\r]
>Apr 12 15:33:56.35: [ 1171]: --> [2:OK]
>Apr 12 15:33:56.35: [ 1171]: SESSION END
>
>
>
>____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null

--------------------------------------
Jeff Herring  /  jeffh@sldsi.com
Seacoast Laboratory Data Systems, Inc.
Voice:  603 431 4114  x14
FAX:    603 431 2112
--------------------------------------


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null