[hylafax-users] Is this A3 fax?

["Warren Wagener" <warren@bandm.co.nz>]

Hi,

We get a few faxes each day from the same machine and they turn out as a
grey (blank)
image file (tif).

Any ideas?

Apr 05 11:36:29.37: [  780]: SESSION BEGIN 00006409 6463569273
Apr 05 11:36:29.37: [  780]: <-- [4:ATA\r]
Apr 05 11:36:37.98: [  780]: --> [5:+FCON]
Apr 05 11:36:37.98: [  780]: MODEM set baud rate: 19200 baud (flow control
unchanged)
Apr 05 11:36:37.98: [  780]: MODEM set baud rate: 19200 baud, input flow
XON/XOFF, output flow XON/XOFF
Apr 05 11:36:37.98: [  780]: ANSWER: FAX CONNECTION
Apr 05 11:36:37.98: [  780]: STATE CHANGE: ANSWERING -> RECEIVING
Apr 05 11:36:37.98: [  780]: MODEM input buffering enabled
Apr 05 11:36:37.98: [  780]: RECV FAX: begin
Apr 05 11:36:39.56: [  780]: --> [29:+FTSI: "           095732360"]
Apr 05 11:36:39.56: [  780]: REMOTE TSI "095732360"
Apr 05 11:36:40.02: [  780]: --> [22:+FDCS: 1,3,2,2,0,0,0,0]
Apr 05 11:36:40.02: [  780]: REMOTE wants 9600 bit/s
Apr 05 11:36:40.02: [  780]: REMOTE wants page width 2432 pixels in 303 mm
Apr 05 11:36:40.02: [  780]: REMOTE wants unlimited page length
Apr 05 11:36:40.02: [  780]: REMOTE wants 7.7 line/mm
Apr 05 11:36:40.02: [  780]: REMOTE wants 1-D MR
Apr 05 11:36:40.13: [  780]: --> [2:OK]
Apr 05 11:36:40.13: [  780]: <-- [7:AT+FDR\r]
Apr 05 11:36:41.92: [  780]: --> [5:+FCFR]
Apr 05 11:36:44.23: [  780]: --> [22:+FDCS: 1,3,2,2,0,0,0,0]
Apr 05 11:36:44.23: [  780]: REMOTE wants 9600 bit/s
Apr 05 11:36:44.23: [  780]: REMOTE wants page width 2432 pixels in 303 mm
Apr 05 11:36:44.23: [  780]: REMOTE wants unlimited page length
Apr 05 11:36:44.23: [  780]: REMOTE wants 7.7 line/mm
Apr 05 11:36:44.23: [  780]: REMOTE wants 1-D MR
Apr 05 11:36:44.23: [  780]: --> [7:CONNECT]
Apr 05 11:36:44.23: [  780]: RECV: begin page
Apr 05 11:36:44.23: [  780]: MODEM set XON/XOFF/FLUSH: input ignored, output
generated
Apr 05 11:36:44.23: [  780]: RECV: send trigger 022
Apr 05 11:36:44.23: [  780]: <-- data [1]
Apr 05 11:36:44.44: [  780]: RECV/CQ: Bad 1D pixel count, row 0, got 1728,
expected 2432
~~~~~
cut
~~~~~
Apr 05 11:41:38.30: [  780]: RECV/CQ: Bad 1D pixel count, row 2316, got 0,
expected 2432
Apr 05 11:41:38.30: [  780]: RECV/CQ: Bad 1D pixel count, row 2317, got 0,
expected 2432
Apr 05 11:41:38.30: [  780]: RECV/CQ: Bad 1D pixel count, row 2318, got 0,
expected 2432
Apr 05 11:41:38.30: [  780]: RECV/CQ: Adjusting for trailing noise (2319
run)
Apr 05 11:41:38.30: [  780]: RECV: 0 total lines, 0 bad lines, 0 consecutive
bad lines
Apr 05 11:41:38.30: [  780]: MODEM set XON/XOFF/DRAIN: input interpreted,
output disabled
Apr 05 11:41:38.30: [  780]: --> [17:+FPTS: 1,2219,0,0]
Apr 05 11:41:39.62: [  780]: --> [7:+FET: 2]
Apr 05 11:41:39.62: [  780]: RECV recv EOP (no more pages or documents)
Apr 05 11:41:39.73: [  780]: --> [2:OK]
Apr 05 11:41:39.73: [  780]: RECV send MCF (message confirmation)
Apr 05 11:41:39.73: [  780]: RECV FAX (00006409): from 095732360, page 4 in
1:17, INF, 7.7 line/mm, 1-D MR, 9600 bit/s
Apr 05 11:41:39.73: [  780]: RECV FAX (00006409): recvq/fax02351.tif from
095732360, route to <unspecified>, 4 pages in 5:02
Apr 05 11:41:39.73: [  780]: <-- [7:AT+FDR\r]
Apr 05 11:41:42.71: [  780]: --> [8:+FHNG: 0]
Apr 05 11:41:42.71: [  780]: REMOTE HANGUP: Normal and proper end of
connection (code 0)
Apr 05 11:41:42.71: [  780]: RECV FAX: bin/faxrcvd "recvq/fax02351.tif"
"ttyS1" "00006409" ""
Apr 05 11:41:44.92: [  780]: RECV FAX: end
Apr 05 11:41:44.92: [  780]: SESSION END




Warren Wagener
(Senior Computer Technician)
B&M For Everything Electrical
Warren@bandm.co.nz
Tel +64 6 356 4912
Fax +64 6 356 9273
www.bandm.co.nz



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null