Re: [hylafax-users] CAPI4HylaFax

[Chris Parsons <chrisp@infotec.com.au>]

To sum up my two posts, CAPI4HylaFax and CVS version of SendFax Broken?:


I'm running an eicon card on RHLinux 7.0 with kernal version 2.2.16-22 With
HylaFax 4.1.1. I'm using the Divas for Linux Server Drivers version 1.0
Build 102-393 with a Diva Server 4BRI card.
The Card Worked Well for faxing under nt however had problems with faxes. So
we decided to switch to HylaFax.

The original install used the ttyds0X ports provided by the Eicon driver.
Using Class 2 mode it would not negotiate properly with various fax
machines. In class 1 mode it appeared to work alright but come full
production scale many faxes failed with the MPS / EOP error thats been
documented many times in the archive of this list. I follow the solution I
found to download the CVS version and compile. From then on the error was "
send program terminated abnormally with error 0x06. The archives werent too
helpfull in this case. It was suggested to set logging to max, they already
are and produce nothing of note to help the situation.

I decided at this point to switch to the CAPI4HylaFax. However documentation
is very limited and after getting one line to work, any attempt to get more
than that caused the  Connection dropped with Reason 0x2002 (Illegal
Controller / PLCI / NCCI.) Looking through the sources for capi4hylafax did
not help as it appears to be when it looks for the ISDN channel. I could
even replicate this error with only one line installed.


Any Ideas? Which way should I go?


Thanks for any help.


Chris.



-------- The Capi4linux errors.





Mar 11 12:34:19.92: [ 3935]: SESSION BEGIN 00000328 (null)
Mar 11 12:34:19.93: [ 3935]: SEND FAX: JOB 328 DEST 08xxxxxxxx COMMID
00000634
Mar 11 12:34:19.93: [ 3935]: Try to send a fax to number 08xxxxxxxx in
Hylafax mode.
Mar 11 12:34:19.93: [ 3935]: Dial and starting transfer of TIFF-File
docq/doc418.ps;01 with fine resolution.
Mar 11 12:34:19.93: [ 3937]: Connection dropped with Reason 0x2002 (Illegal
Controller / PLCI / NCCI).
Mar 11 12:34:19.93: [ 3937]: SESSION END






-----Original Message-----
From: hylafax-users-bounce@hylafax.org
[mailto:hylafax-users-bounce@hylafax.org]On Behalf Of Chris Parsons
Sent: Monday, 11 March 2002 12:54
To: 'hylafax-users@hylafax.org'
Subject: [hylafax-users] CAPI4HylaFax


I rebuilt my version of Hylafax from CVS because I was getting massive MPS,
EOP problems to certain machines. However that broke the fax sending
completely. I reinstalled and Install CAPI4HylaFax because I have an eicon 4
Bri card. Most of the time it works how ever every so often the log reports
something similar to the below.

What would cause this problem???:



Mar 11 12:34:19.92: [ 3935]: SESSION BEGIN 00000328 (null)
Mar 11 12:34:19.93: [ 3935]: SEND FAX: JOB 328 DEST 08xxxxxxxx COMMID
00000634
Mar 11 12:34:19.93: [ 3935]: Try to send a fax to number 08xxxxxxxx in
Hylafax mode.
Mar 11 12:34:19.93: [ 3935]: Dial and starting transfer of TIFF-File
docq/doc418.ps;01 with fine resolution.
Mar 11 12:34:19.93: [ 3937]: Connection dropped with Reason 0x2002 (Illegal
Controller / PLCI / NCCI).
Mar 11 12:34:19.93: [ 3937]: SESSION END







____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null