[hylafax-users] mps,rtn, canon fax machines

[dobos_s@IBCnet.hu]

Hi!

The only problem I have with hylafax (4.1) is that with CANON (only) peers
I cannot send faxes.
Log is below.
Yes, I tried the FTS and EOP/MPS-related time patches too. Nothing changed.
Last time somebody told me to play with RTNHandling, but after I read the
manual
I found it cannot be the good solution (I should use "Ignore" if I well
understood it), but
I want to SEND the fax, not simple forget the page!

And the annoying thing: If win$ fax programs can deal with the thing why
hylafax cant?

I can try anything You tell me to try, so please take up with the problem!

My modem says to ati0i1i2i3i4i5i6i7:
(If somebody knows where to find firmware upgrade let me know about it!)

56000
030
P2107-V90
a007040284C6002F
bC60000000
r1005111151012000
r3000111170000000
0A
RCV56DPF-PLL L8773A Rev 14.00/34.00


config:
(Do not suggest to remove +FAE; it is not related to the problem, and I
need it!)

CountryCode:        36
AreaCode:      1
FAXNumber:          "+36 <mynumber>"
LongDistancePrefix: 06
InternationalPrefix:     00
DialStringRules:    etc/dialrules
ServerTracing:      1
SessionTracing:     11
RecvFileMode:       0644
LogFileMode:        0644
DeviceMode:         0600
RingsBeforeAnswer:  1
SpeakerVolume: off
GettyArgs:          "-r -D -x2 -s %s %l"
LocalIdentifier:         "+36 1 <mynumber>"
TagLineFont:        etc/lutRS18.pcf
TagLineFormat:      "From %%l|%c|Page %%P of %%T"
MaxRecvPages:  25

ModemType:          Class1
ModemRate:          115200
ModemFlowControl:   rtscts
ModemResetCmds:     AT&F
ModemNoFlowCmd:     AT&K
ModemHardFlowCmd:   AT&K3
ModemSoftFlowCmd:   AT&K4
ModemSetupDTRCmd:   AT&D2
ModemSetupDCDCmd:   AT&C1
ModemSetupAACmd:    AT+FCLASS=0;+FAE=1
ModemDialCmd:       ATDT0,%s
ModemAnswerFaxBeginCmd:  "<waitfor:CONNECT><waitfor:OK><19200>AT+FCLASS=1"
ModemAnswerDataBeginCmd: "ATO\r<waitfor:CONNECT>"


the log:

Feb 28 14:07:55.23: [20912]: SESSION BEGIN 00004340 361<faxnum>
Feb 28 14:07:55.23: [20912]: HylaFAX (tm) Version 4.1
Feb 28 14:07:55.23: [20912]: SEND FAX: JOB 187 DEST <faxnum> COMMID
00004340
Feb 28 14:07:55.23: [20912]: DEVICE '/dev/ttyS0'
Feb 28 14:07:55.23: [20912]: DELAY 75 ms
Feb 28 14:07:55.30: [20912]: DELAY 2600 ms
Feb 28 14:07:57.90: [20912]: <-- [4:ATZ\r]
Feb 28 14:07:57.97: [20912]: --> [2:OK]
Feb 28 14:07:57.97: [20912]: <-- [5:AT&F\r]
Feb 28 14:07:57.98: [20912]: --> [4:AT&F]
Feb 28 14:07:57.98: [20912]: --> [2:OK]
Feb 28 14:07:57.98: [20912]: <-- [5:ATE0\r]
Feb 28 14:07:57.99: [20912]: --> [4:ATE0]
Feb 28 14:07:57.99: [20912]: --> [2:OK]
Feb 28 14:07:57.99: [20912]: <-- [5:ATV1\r]
Feb 28 14:07:58.00: [20912]: --> [2:OK]
Feb 28 14:07:58.00: [20912]: <-- [5:ATQ0\r]
Feb 28 14:07:58.01: [20912]: --> [2:OK]
Feb 28 14:07:58.01: [20912]: <-- [7:ATS0=0\r]
Feb 28 14:07:58.02: [20912]: --> [2:OK]
Feb 28 14:07:58.02: [20912]: <-- [7:ATS8=2\r]
Feb 28 14:07:58.03: [20912]: --> [2:OK]
Feb 28 14:07:58.03: [20912]: <-- [8:ATS7=60\r]
Feb 28 14:07:58.04: [20912]: --> [2:OK]
Feb 28 14:07:58.04: [20912]: <-- [6:AT&K3\r]
Feb 28 14:07:58.05: [20912]: --> [2:OK]
Feb 28 14:07:58.05: [20912]: <-- [6:AT&D2\r]
Feb 28 14:07:58.06: [20912]: --> [2:OK]
Feb 28 14:07:58.06: [20912]: <-- [6:AT&C1\r]
Feb 28 14:07:58.07: [20912]: --> [2:OK]
Feb 28 14:07:58.07: [20912]: <-- [12:AT+FCLASS=1\r]
Feb 28 14:07:58.08: [20912]: --> [2:OK]
Feb 28 14:07:58.08: [20912]: <-- [19:AT+FCLASS=0;+FAE=1\r]
Feb 28 14:07:58.09: [20912]: --> [2:OK]
Feb 28 14:07:58.09: [20912]: <-- [5:ATM0\r]
Feb 28 14:07:58.10: [20912]: --> [2:OK]
Feb 28 14:07:58.10: [20912]: <-- [12:AT+FCLASS=1\r]
Feb 28 14:07:58.21: [20912]: --> [2:OK]
Feb 28 14:07:58.21: [20912]: DIAL <faxnum>
Feb 28 14:07:58.21: [20912]: <-- [14:ATDT0,<faxnum>\r]
Feb 28 14:08:16.55: [20912]: --> [7:CONNECT]
Feb 28 14:08:18.30: [20912]: --> [2:OK]
Feb 28 14:08:18.30: [20912]: REMOTE NSF "00 00 11 80 00 8A 49 10 42 4D 46
20 4E 49 4B 20 20 20 20 20 20 20 20 20 00 59 00 80 80 D8 86 01 01 01 01 00
BB"
Feb 28 14:08:18.30: [20912]: NSF remote fax equipment: Canon
Feb 28 14:08:18.30: [20912]: NSF remote station ID: "BMF NIK         "
Feb 28 14:08:18.30: [20912]: <-- [9:AT+FRH=3\r]
Feb 28 14:08:18.31: [20912]: --> [7:CONNECT]
Feb 28 14:08:18.99: [20912]: --> [2:OK]
Feb 28 14:08:18.99: [20912]: REMOTE CSI "+36 1 368 9632"
Feb 28 14:08:18.99: [20912]: <-- [9:AT+FRH=3\r]
Feb 28 14:08:19.00: [20912]: --> [7:CONNECT]
Feb 28 14:08:19.26: [20912]: --> [2:OK]
Feb 28 14:08:19.26: [20912]: REMOTE best rate 14400 bit/s
Feb 28 14:08:19.26: [20912]: REMOTE max page width 1728 pixels in 215 mm
Feb 28 14:08:19.26: [20912]: REMOTE max unlimited page length
Feb 28 14:08:19.26: [20912]: REMOTE best vres 7.7 line/mm
Feb 28 14:08:19.26: [20912]: REMOTE best format 2-D MMR
Feb 28 14:08:19.26: [20912]: REMOTE supports T.30 Annex A, ECM
Feb 28 14:08:19.26: [20912]: REMOTE best 10 ms/scanline
Feb 28 14:08:19.26: [20912]: USE 14400 bit/s
Feb 28 14:08:19.26: [20912]: USE 10 ms/scanline
Feb 28 14:08:19.26: [20912]: SEND file "docq/doc187.ps;40"
Feb 28 14:08:19.26: [20912]: USE page width 1728 pixels in 215 mm
Feb 28 14:08:19.26: [20912]: USE unlimited page length
Feb 28 14:08:19.26: [20912]: USE 3.85 line/mm
Feb 28 14:08:19.26: [20912]: USE 2-D MR
Feb 28 14:08:19.26: [20912]: SEND training at v.17 14400 bit/s
Feb 28 14:08:19.26: [20912]: <-- [9:AT+FTH=3\r]
Feb 28 14:08:19.29: [20912]: --> [7:CONNECT]
Feb 28 14:08:19.29: [20912]: <-- data [23]
Feb 28 14:08:19.29: [20912]: <-- data [2]
Feb 28 14:08:21.08: [20912]: --> [7:CONNECT]
Feb 28 14:08:21.08: [20912]: <-- data [6]
Feb 28 14:08:21.08: [20912]: <-- data [2]
Feb 28 14:08:21.52: [20912]: --> [2:OK]
Feb 28 14:08:21.52: [20912]: DELAY 75 ms
Feb 28 14:08:21.60: [20912]: <-- [11:AT+FTM=145\r]
Feb 28 14:08:21.63: [20912]: --> [7:CONNECT]
Feb 28 14:08:21.63: [20912]: <-- data [1024]
Feb 28 14:08:21.63: [20912]: <-- data [1024]
Feb 28 14:08:21.63: [20912]: <-- data [652]
Feb 28 14:08:21.63: [20912]: <-- data [2]
Feb 28 14:08:24.75: [20912]: --> [2:OK]
Feb 28 14:08:24.75: [20912]: <-- [9:AT+FRH=3\r]
Feb 28 14:08:25.14: [20912]: --> [7:CONNECT]
Feb 28 14:08:26.03: [20912]: --> [2:OK]
Feb 28 14:08:26.03: [20912]: TRAINING succeeded
Feb 28 14:08:26.03: [20912]: DELAY 75 ms
Feb 28 14:08:26.11: [20912]: <-- [11:AT+FTM=146\r]
Feb 28 14:08:26.14: [20912]: --> [7:CONNECT]
Feb 28 14:08:26.14: [20912]: SEND begin page
Feb 28 14:08:26.15: [20912]: <-- data [1030]
Feb 28 14:08:26.15: [20912]: <-- data [1024]
Feb 28 14:08:26.15: [20912]: <-- data [1029]
Feb 28 14:08:26.15: [20912]: <-- data [1033]
Feb 28 14:08:26.72: [20912]: <-- data [1035]
Feb 28 14:08:26.72: [20912]: <-- data [1033]
Feb 28 14:08:27.25: [20912]: <-- data [1032]
Feb 28 14:08:27.78: [20912]: <-- data [1037]
Feb 28 14:08:28.32: [20912]: <-- data [1034]
Feb 28 14:08:29.13: [20912]: <-- data [1040]
Feb 28 14:08:29.67: [20912]: <-- data [1035]
Feb 28 14:08:30.21: [20912]: <-- data [1037]
Feb 28 14:08:30.75: [20912]: <-- data [1037]
Feb 28 14:08:31.29: [20912]: <-- data [1025]
Feb 28 14:08:31.84: [20912]: <-- data [1029]
Feb 28 14:08:32.38: [20912]: <-- data [1036]
Feb 28 14:08:32.92: [20912]: <-- data [1031]
Feb 28 14:08:33.47: [20912]: <-- data [1024]
Feb 28 14:08:34.00: [20912]: <-- data [1026]
Feb 28 14:08:34.80: [20912]: <-- data [1026]
Feb 28 14:08:35.34: [20912]: <-- data [144]
Feb 28 14:08:35.34: [20912]: SENT 20624 bytes of data
Feb 28 14:08:35.34: [20912]: <-- data [1026]
Feb 28 14:08:35.88: [20912]: <-- data [1027]
Feb 28 14:08:36.41: [20912]: <-- data [1024]
Feb 28 14:08:36.95: [20912]: <-- data [1025]
Feb 28 14:08:37.48: [20912]: <-- data [1025]
Feb 28 14:08:38.28: [20912]: <-- data [357]
Feb 28 14:08:38.28: [20912]: SENT 5477 bytes of data
Feb 28 14:08:38.28: [20912]: SEND 2D RTC
Feb 28 14:08:38.28: [20912]: <-- data [30]
Feb 28 14:08:38.28: [20912]: <-- data [2]
Feb 28 14:08:38.28: [20912]: SEND end page
Feb 28 14:08:41.02: [20912]: --> [2:OK]
Feb 28 14:08:41.02: [20912]: DELAY 75 ms
Feb 28 14:08:41.10: [20912]: SEND send MPS (more pages, same document)
Feb 28 14:08:41.10: [20912]: <-- [9:AT+FTH=3\r]
Feb 28 14:08:41.13: [20912]: --> [7:CONNECT]
Feb 28 14:08:41.13: [20912]: <-- data [3]
Feb 28 14:08:41.13: [20912]: <-- data [2]
Feb 28 14:08:42.45: [20912]: --> [2:OK]
Feb 28 14:08:42.45: [20912]: <-- [9:AT+FRH=3\r]
Feb 28 14:08:45.55: [20912]: --> [0:]
Feb 28 14:08:45.55: [20912]: MODEM <Empty line>
Feb 28 14:08:45.55: [20912]: <-- data [1]
Feb 28 14:08:45.60: [20912]: --> [2:OK]
Feb 28 14:08:45.60: [20912]: SEND send MPS (more pages, same document)
Feb 28 14:08:45.60: [20912]: <-- [9:AT+FTH=3\r]
Feb 28 14:08:45.63: [20912]: --> [7:CONNECT]
Feb 28 14:08:45.63: [20912]: <-- data [3]
Feb 28 14:08:45.63: [20912]: <-- data [2]
Feb 28 14:08:46.95: [20912]: --> [2:OK]
Feb 28 14:08:46.95: [20912]: <-- [9:AT+FRH=3\r]
Feb 28 14:08:50.05: [20912]: --> [0:]
Feb 28 14:08:50.05: [20912]: MODEM <Empty line>
Feb 28 14:08:50.05: [20912]: <-- data [1]
Feb 28 14:08:50.10: [20912]: --> [2:OK]
Feb 28 14:08:50.10: [20912]: SEND send MPS (more pages, same document)
Feb 28 14:08:50.10: [20912]: <-- [9:AT+FTH=3\r]
Feb 28 14:08:50.15: [20912]: --> [7:CONNECT]
Feb 28 14:08:50.15: [20912]: <-- data [3]
Feb 28 14:08:50.15: [20912]: <-- data [2]
Feb 28 14:08:51.47: [20912]: --> [2:OK]
Feb 28 14:08:51.47: [20912]: <-- [9:AT+FRH=3\r]
Feb 28 14:08:54.57: [20912]: --> [0:]
Feb 28 14:08:54.57: [20912]: MODEM <Empty line>
Feb 28 14:08:54.57: [20912]: <-- data [1]
Feb 28 14:08:54.62: [20912]: --> [2:OK]
Feb 28 14:08:54.62: [20912]: No response to MPS or EOP repeated 3 tries
Feb 28 14:08:54.62: [20912]: SEND: No response to MPS or EOP repeated 3
tries; Giving up after 3 attempts to send same page "docq/doc187.ps;40",
dirnum 0
Feb 28 14:08:54.62: [20912]: <-- [9:AT+FTH=3\r]
Feb 28 14:08:54.65: [20912]: --> [7:CONNECT]
Feb 28 14:08:54.65: [20912]: <-- data [3]
Feb 28 14:08:54.65: [20912]: <-- data [2]
Feb 28 14:08:55.97: [20912]: --> [2:OK]
Feb 28 14:08:55.97: [20912]: <-- [5:ATH0\r]
Feb 28 14:08:56.84: [20912]: --> [2:OK]
Feb 28 14:08:56.84: [20912]: SESSION END



Dobos Sandor
IBCnet Hungary Ltd.





____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null