HylaFAX The world's
most advanced open source fax server
|
|
[
Date Prev][
Date Next][
Thread Prev][
Thread Next]
[
Date Index]
[
Thread Index]
Re: [hylafax-users] Can't Receive Faxes - --> [10:NO CARRIER]
On 2002.02.27 18:05 "Burath, Philipp" wrote:
> Hi,
>
> I have just setup Hylafax 4.1.1 with Redhat 6.1 from the source
> distribution. I haven't been able to receive any faxes as I get a [10:NO
> CARRIER]. Modem is setup as class 1. I can send faxes fine. When it tries
> to
> receive a fax it sits at "RECV: begin page" with the "off hook" light on
> and
> faxstat sits on "Receiving from XXXX". I have tried turning Adaptive
> answer
> off with AT+FAA=0 but this hasn't resolved the problem.
>
> Any ideas?
>
> Feb 28 10:02:05.75: [ 8046]: SESSION BEGIN 00000002 610893171536
> Feb 28 10:02:05.75: [ 8046]: HylaFAX (tm) Version 4.1.1
> Feb 28 10:02:05.76: [ 8046]: <-- [4:ATA\r]
> Feb 28 10:02:11.21: [ 8046]: --> [7:CONNECT]
> Feb 28 10:02:11.22: [ 8046]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyE0'
What is /dev/ttyE0 ? Non-standard serial port.
....
> Feb 28 10:02:21.76: [ 8046]: RECV/CQ: Invalid BlackTable code word, row
> 0, x
> 0
> Feb 28 10:02:21.76: [ 8046]: RECV/CQ: Invalid BlackTable code word, row
> 0, x
> 0
I'm thinking either FlowControl is bad or ModemRecvFillOrder is bad in you
modem config.
See 'man hylafax-config'
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null