Re: [hylafax-users] Fwd: Sends fine, no receive

[Lee Howard <faxguy@server.deanox.com>]

> ----- Forwarded message from "Skull, Temple of." <skull@key.net.au>
> -----
> Date: Fri, 11 Jan 2002 16:25:18 +1100
> From: "Skull, Temple of." <skull@key.net.au>
> Reply-To: "Skull, Temple of." <skull@key.net.au>
> Subject: Sends fine, no receive
> To: webmaster@hylafax.org
> 
> 
> I am running Hylafax version 4.1 on a Redhat 6.1 with version 2.2 Linux
> 
> kernel.  Hylafax sends out fine using Windows box with WHFC.
> 
> But on attempting to send a fax from another location I get this message
> in 
> the Hylafax logs.  It is always the same and is in a file named "C" then
> 
> several zeros and a number.  This one was on a file called
> "c00000008":
> 
> Jan 11 10:07:50.60: [  590]: SESSION BEGIN 00000008 6102610266564107
> Jan 11 10:07:50.60: [  590]: <-- [4:ATA\r]
> Jan 11 10:07:53.73: [  590]: --> [3:FAX]
> Jan 11 10:07:59.59: [  590]: --> [5:+FCON]
> Jan 11 10:07:59.59: [  590]: ANSWER: FAX CONNECTION
> Jan 11 10:07:59.59: [  590]: sched policy=1, priority=1
> Jan 11 10:07:59.59: [  590]: RECV FAX: begin
> Jan 11 10:10:59.70: [  590]: REMOTE HANGUP: Unspecified Receive Phase B
> 
> error (code 70)
> Jan 11 10:10:59.70: [  590]: RECV FAX: Unspecified Receive Phase B
> error
> Jan 11 10:10:59.70: [  590]: RECV FAX: end
> Jan 11 10:10:59.70: [  590]: SESSION END
> 
> I am in the process of upping the server tracing, checking the logs and
> 
> finding wherever the instructions to fix this are buried in the Howto's
> or 
> FAQ's.  I have read them and will again, but if there's an easy fix to
> this 
> can someone please tell me?
> 
> I don't want to throw this package in the too hard basket, but your docs
> do 
> say it comes configured to receive.   I sent the test from a Ricoh
> Aficio 
> 220.  I have not configured Hylafax with old protocol, just hfaxd and
> faxq 
> with SNPP on startup.  Clocal as root is set as "yes".  The only other
> 
> change I can think of is I put "192.168.1" in the hosts.hfaxd file to
> send 
> from my home network.
> 
> And where do I find the "hfaxd.conf" file referred to in the
> documentation?

Your questions are indicative that you haven't read the on-line documentation 
at http://www.hylafax.org/ and especially http://www.hylafax.org/howto/

Specifically addressing your problem - I would suggest that you change to Class 
1.  Re-run faxaddmodem and choose Class 1.

Lee.
 -s unsubscribe hylafax-users-request@hylafax.org <
> /dev/null
> 


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null