![]() |
Thanks for the help. I am now running faxgetty and everything is much improved. Regards, Ryan ----- Original Message ----- From: "Andreas H�dle" <hoedle@kwsoft.de> Cc: <hylafax-users@hylafax.org> Sent: Monday, January 07, 2002 12:24 PM Subject: Re: [hylafax-users] MicroLink 56k Internet - waiting for modem to come ready > Ryan Ferguson schrieb: > > > > I have installed HylaFAX on a RedHat 7.2 system from the > > hylafax-4.1-1rh7.i386.rpm. The modem I am using is an Elsa MicroLink 56k > > Internet. I ran faxsetup and faxaddmodem accepting most of the defaults. The > > resulting setup mostly works, but quite frequently the send queue gets > > jammed up and faxstat returns "waiting for modem to come ready". > > > > A couple of questions: > > > > 1) I have been to Elsa's support site to get an appropriate config file. > > However there are 2 different files but I do not know which (if either) is > > appropriate for my particular modem. Could some some please post the correct > > file? > > http://hyla.xtremeweb.de/cgi-bin/hyla/hylaeng.pl > > > 2) What commands can I issue to reset the modem (or HylaFAX) - ie to get its > > out of its "waiting for modem to come ready" state. > > Maybe run faxgetty? > > > > > Regards, > > Ryan > > > -- > Andreas H�dle (Systemadministration) > > K�hn & Weyh Software GmbH > Linnestr. 1-3 > 79110 Freiburg > > WWW.KWSOFT.DE > > > ____________________ HylaFAX(tm) Users Mailing List _______________________ > To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null > > ____________________ HylaFAX(tm) Users Mailing List _______________________ To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null