Re: [hylafax-users] Rockwell modem busy signal Problem.

[Lee Howard <faxguy@deanox.com>]

At 10:10 AM 11/21/01 -0000, Nigel Kilner wrote:
>I am running Hylafax v4.1 under Suse linux 7.1. The modem is identified as
>rockwell class 1 or 2 (RC288DPi) the problem is that I often get a false
>'busy signal detected' message. I've checked the modems at other end by
>phone and they do answer with a connect tone after a number of rings. I've
>also tested this with a fax in a nearby office and that sometimes gives the
>false busy signal after just 1 ring.
>
>Question: are there any tips or tweaks to the config file etc, which may
>prevent this behaviour.

Are you on a PBX'd phone system?  Sometimes I've had to cause a "W"ait in
my dialstring.

Lee.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null