Re: [hylafax-users] setting delay between jobs?

[James Werkowski <jwerkowski@attglobal.net>]

Bob --

Do you want to set a delay between each fax send, or to delay a re-dial 
when the receiving fax is busy?

I don't think the tags Pedro suggested would quite do the trick: 
PollModemWait won't kick if the modem resets cleanly; ModemATCmdDelay would 
put the wait time before EACH command sent to the modem; and 
ModemWaitTimeCmd only affects how much time the modem waits for a carrier 
after the call is placed/answered.

If the dial string time outs that Lee suggested don't seem to work, you 
might try setting ModemDTRDropDelay to a high value. This is the time in 
milliseconds that HylaFax waits between dropping the DTR signal to force a 
modem reset, and raising it to continue with the modem initialization. 
And/or you could try setting ModemResetDelay to a high value. This is the 
time in ms that HylaFax waits after the DTR signal is raised. This ought to 
force a consistent delay between each fax job, but I don't know if there 
are maximum values for these tags, or if long waits would make the system 
cranky.

It's a bit kludgy to be sure, but as long as there has been code, there 
have been kludges to fix an unforeseen problem and get on with it.

I also think HylaFax is an excellant, useful program and I'm pleased to 
have it. Thanks to Lee and everyone else who helps support it.




At 12:41 PM 10/25/2001 +0100, procadas@creditus.pt wrote:

> From man config:
>
>PollModemWait
>               The time (in seconds) to wait between checks for  a
>               modem  to  become  ready  for  use.   Modem polling
>               occurs when a modem fails to reset cleanly.
>
>
>ModemATCmdDelay
>               A  delay, in milliseconds, that should be performed
>               before each ``AT'' command string is  sent  to  the
>               modem.
>
>ModemWaitTimeCmd
>               The command to set the number of  seconds  to  wait
>               for a carrier signal when placing a call or answer�
>               ing the phone.
>
>
>DISCLAIMER: it's just an oppinion. No flames please.
>
>Lee in some point is right. He 's giving free tech support. But, keep cool
>man :). Anyway, I'm pretty sure that these copy+paste from man config could
>help Bob Billson. some of my problems and their answer shows to me that
>hylafax is a VERY GOOD piece of software. And what was pointed as a
>"problem" is what make hylafax so damn good: never stop to send an a
>waiting fax. Repeting, I'm pretty sure  that one of the tags above will
>help.
>
>
>Pedro Ro�adas (procadas@creditus.pt)
>Dpt� Inform�tica,BPN-Cr�ditus Technical Staff
>
>
>
>____________________ HylaFAX(tm) Users Mailing List _______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null

James Werkowski
Northlight Systems
PO Box 1
Stuyvesant, NY 12173-0001
Phone: (518) 758-8121
Pager/cell: (518) 965-8838
jwerkowski@attglobal.net



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null