 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] Unspecified Transmit Phase C error (Code 40)
- To: <hylafax-users@hylafax.org>
- Subject: [hylafax-users] Unspecified Transmit Phase C error (Code 40)
- From: "Riki - Imap" <riki.scasi@libero.it>
- Date: Fri, 19 Oct 2001 13:12:39 +0200
Hi all, I'm trying to setup hylafax to send and receive faxes. I currently have RedHat Linux 7.0 and I have installed Hylafax 4.1-1 (hylafax-4.1-1rh7.i386.rpm). I have libtiff 3.5.5 installed. My modem is an old external e-tech mod. E288c FaxModem (V.34) configured as a class2 modem. I had a problem sending a 'complex' fax (3 pages text/graphics) using Word and WHFC, which wasn't delivered correctly (to more than a destination): - In one case the three pages were received, but the graphics were in part not clear - In another case it was delivered three times the first page (partially not clear) (note that the same document was received perfectly) here it follows the log (quite long): Oct 19 10:10:56.43: [ 4102]: SESSION BEGIN 00000034 392700441776 Oct 19 10:10:56.43: [ 4102]: HylaFAX (tm) Version 4.1 Oct 19 10:10:56.43: [ 4102]: SEND FAX: JOB 9 DEST 02700441776 COMMID 00000034 Oct 19 10:10:56.43: [ 4102]: DEVICE '/dev/ttyS0' Oct 19 10:10:56.43: [ 4102]: DELAY 75 ms Oct 19 10:10:56.51: [ 4102]: DELAY 2600 ms Oct 19 10:10:59.11: [ 4102]: <-- [4:ATZ\r] Oct 19 10:10:59.24: [ 4102]: --> [2:OK] Oct 19 10:10:59.24: [ 4102]: <-- [5:ATE0\r] Oct 19 10:10:59.35: [ 4102]: --> [4:ATE0] Oct 19 10:10:59.35: [ 4102]: --> [2:OK] Oct 19 10:10:59.35: [ 4102]: <-- [5:ATV1\r] Oct 19 10:10:59.46: [ 4102]: --> [2:OK] Oct 19 10:10:59.46: [ 4102]: <-- [5:ATQ0\r] Oct 19 10:10:59.57: [ 4102]: --> [2:OK] Oct 19 10:10:59.57: [ 4102]: <-- [7:ATS0=0\r] Oct 19 10:10:59.69: [ 4102]: --> [2:OK] Oct 19 10:10:59.69: [ 4102]: <-- [7:ATS8=2\r] Oct 19 10:10:59.81: [ 4102]: --> [2:OK] Oct 19 10:10:59.81: [ 4102]: <-- [8:ATS7=60\r] Oct 19 10:10:59.93: [ 4102]: --> [2:OK] Oct 19 10:10:59.93: [ 4102]: <-- [12:AT+FCLASS=2\r] Oct 19 10:11:00.05: [ 4102]: --> [2:OK] Oct 19 10:11:00.05: [ 4102]: <-- [10:AT+FTBC=0\r] Oct 19 10:11:00.17: [ 4102]: --> [2:OK] Oct 19 10:11:00.17: [ 4102]: <-- [10:AT+FBOR=0\r] Oct 19 10:11:00.29: [ 4102]: --> [2:OK] Oct 19 10:11:00.29: [ 4102]: <-- [13:AT+FPHCTO=30\r] Oct 19 10:11:00.41: [ 4102]: --> [2:OK] Oct 19 10:11:00.41: [ 4102]: <-- [24:AT+FDCC=1,5,0,2,0,0,0,0\r] Oct 19 10:11:00.54: [ 4102]: --> [2:OK] Oct 19 10:11:00.54: [ 4102]: <-- [5:ATM0\r] Oct 19 10:11:00.67: [ 4102]: --> [2:OK] Oct 19 10:11:00.67: [ 4102]: <-- [12:AT+FCLASS=2\r] Oct 19 10:11:00.89: [ 4102]: --> [2:OK] Oct 19 10:11:00.89: [ 4102]: <-- [10:AT+FTBC=0\r] Oct 19 10:11:01.11: [ 4102]: --> [2:OK] Oct 19 10:11:01.11: [ 4102]: <-- [10:AT+FBOR=0\r] Oct 19 10:11:01.33: [ 4102]: --> [2:OK] Oct 19 10:11:01.33: [ 4102]: <-- [13:AT+FPHCTO=30\r] Oct 19 10:11:01.55: [ 4102]: --> [2:OK] Oct 19 10:11:01.55: [ 4102]: <-- [24:AT+FDCC=1,5,0,2,0,0,0,0\r] Oct 19 10:11:01.77: [ 4102]: --> [2:OK] Oct 19 10:11:01.77: [ 4102]: <-- [25:AT+FLID="S.C.A.S.I. snc"\r] Oct 19 10:11:02.00: [ 4102]: --> [2:OK] Oct 19 10:11:02.02: [ 4102]: DIAL 02700441776 Oct 19 10:11:02.02: [ 4102]: <-- [16:ATDT02700441776\r] Oct 19 10:11:12.22: [ 4102]: --> [5:+FCON] Oct 19 10:11:13.83: [ 4102]: --> [28:+FCSI:" "] Oct 19 10:11:13.83: [ 4102]: REMOTE CSI "" Oct 19 10:11:14.19: [ 4102]: --> [21:+FDIS:1,5,0,2,0,0,0,0] Oct 19 10:11:14.19: [ 4102]: --> [2:OK] Oct 19 10:11:14.19: [ 4102]: REMOTE best rate 14400 bit/s Oct 19 10:11:14.19: [ 4102]: REMOTE max page width 1728 pixels in 215 mm Oct 19 10:11:14.19: [ 4102]: REMOTE max unlimited page length Oct 19 10:11:14.19: [ 4102]: REMOTE best vres 7.7 line/mm Oct 19 10:11:14.19: [ 4102]: REMOTE best format 1-D MR Oct 19 10:11:14.19: [ 4102]: REMOTE best 0 ms/scanline Oct 19 10:11:14.19: [ 4102]: USE 14400 bit/s Oct 19 10:11:14.19: [ 4102]: USE 0 ms/scanline Oct 19 10:11:14.19: [ 4102]: SEND file "docq/doc9.ps;01" Oct 19 10:11:14.19: [ 4102]: USE page width 1728 pixels in 215 mm Oct 19 10:11:14.19: [ 4102]: USE unlimited page length Oct 19 10:11:14.19: [ 4102]: USE 7.7 line/mm Oct 19 10:11:14.19: [ 4102]: USE 1-D MR Oct 19 10:11:14.19: [ 4102]: <-- [7:AT+FDT\r] Oct 19 10:11:21.68: [ 4102]: --> [21:+FDCS:1,5,0,2,0,0,0,0] Oct 19 10:11:22.23: [ 4102]: --> [7:CONNECT] Oct 19 10:11:22.23: [ 4102]: SEND wait for XON Oct 19 10:11:22.23: [ 4102]: --> [1:] Oct 19 10:11:22.23: [ 4102]: SEND begin page Oct 19 10:12:46.09: [ 4102]: SENT 161485 bytes of data Oct 19 10:12:46.60: [ 4102]: SEND end page Oct 19 10:12:48.41: [ 4102]: --> [2:OK] Oct 19 10:12:48.41: [ 4102]: SEND send MPS (more pages, same document) Oct 19 10:12:48.41: [ 4102]: <-- [9:AT+FET=0\r] Oct 19 10:12:51.74: [ 4102]: --> [7:+FPTS:2] Oct 19 10:12:51.74: [ 4102]: --> [2:OK] Oct 19 10:12:51.74: [ 4102]: SEND recv RTN (retrain negative) Oct 19 10:12:51.74: [ 4102]: <-- [24:AT+FDIS=1,4,0,2,0,0,0,0\r] Oct 19 10:12:51.97: [ 4102]: --> [2:OK] Oct 19 10:12:51.97: [ 4102]: <-- [7:AT+FDT\r] Oct 19 10:12:59.23: [ 4102]: --> [21:+FDCS:1,5,0,2,0,0,0,0] Oct 19 10:12:59.78: [ 4102]: --> [7:CONNECT] Oct 19 10:12:59.78: [ 4102]: SEND wait for XON Oct 19 10:12:59.78: [ 4102]: --> [1:] Oct 19 10:12:59.78: [ 4102]: SEND begin page Oct 19 10:14:23.64: [ 4102]: SENT 161485 bytes of data Oct 19 10:14:24.15: [ 4102]: SEND end page Oct 19 10:14:24.25: [ 4102]: --> [2:OK] Oct 19 10:14:24.25: [ 4102]: SEND send MPS (more pages, same document) Oct 19 10:14:24.25: [ 4102]: <-- [9:AT+FET=0\r] Oct 19 10:14:27.22: [ 4102]: --> [7:+FPTS:2] Oct 19 10:14:27.22: [ 4102]: --> [2:OK] Oct 19 10:14:27.22: [ 4102]: SEND recv RTN (retrain negative) Oct 19 10:14:27.22: [ 4102]: <-- [24:AT+FDIS=1,3,0,2,0,0,0,0\r] Oct 19 10:14:27.45: [ 4102]: --> [2:OK] Oct 19 10:14:27.45: [ 4102]: <-- [7:AT+FDT\r] Oct 19 10:14:34.71: [ 4102]: --> [21:+FDCS:1,5,0,2,0,0,0,0] Oct 19 10:14:35.26: [ 4102]: --> [7:CONNECT] Oct 19 10:14:35.26: [ 4102]: SEND wait for XON Oct 19 10:14:35.26: [ 4102]: --> [1:] Oct 19 10:14:35.26: [ 4102]: SEND begin page Oct 19 10:15:59.12: [ 4102]: SENT 161485 bytes of data Oct 19 10:15:59.63: [ 4102]: SEND end page Oct 19 10:16:31.44: [ 4102]: --> [8:+FHNG:40] Oct 19 10:16:31.44: [ 4102]: REMOTE HANGUP: Unspecified Transmit Phase C error (code 40) Oct 19 10:16:31.44: [ 4102]: --> [2:OK] Oct 19 10:16:31.44: [ 4102]: <-- [5:ATH0\r] Oct 19 10:16:31.65: [ 4102]: --> [2:OK] Oct 19 10:16:31.65: [ 4102]: SESSION END Can anybody help me? Thanks Riki ____________________ HylaFAX(tm) Users Mailing List _______________________ To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
- Follow-Ups:
- Re: [hylafax-users] Unspecified Transmit Phase C error (Code 40)
- From: Lee Howard
- Re: [hylafax-users] Unspecified Transmit Phase C error (Code 40)
- Prev by Date: Re: [hylafax-users] Error converting data; command was "/usr/sbin/textfmt -B -f Courier-Bold
- Next by Date: Re: [hylafax-users] sender variable in faxdispatch field
- Previous by thread: [hylafax-users] avm c4 with 4 controllers
- Next by thread: Re: [hylafax-users] Unspecified Transmit Phase C error (Code 40)
- Index(es):
Project hosted by iFAX Solutions