Re: [hylafax-users] Legal size faxes

[Josh Welch <josh01@buffalowildwings.com>]

...my config file. 
I have also included my config file.
> Well, I am having some isues doing an archive search, the mirror points
> to the 
> original site for the archives, and I am not coming up with it off of
> the 
> website, so I have to ask. What am I likely doing wrong if a legal size
> fax is 
> getting cut off at letter when received? I\\\'ve included a log from an
> offending 
> fax. I am running 4.1 on a Red Hat 7.1 box. I have three Multitech
> MT1932ZDX 
> modems, and I have also included 
> 
> Josh Welch
> Computer Support Specialist
> Buffalo Wild Wings
> 952-278-9557
> 
> Sep 19 15:05:54.69: [  698]: SESSION BEGIN 00007400 19525939787
> Sep 19 15:05:54.69: [  698]: <-- [4:ATA\\\\r]
> Sep 19 15:06:02.63: [  698]: --> [5:+FCON]
> Sep 19 15:06:02.63: [  698]: ANSWER: FAX CONNECTION
> Sep 19 15:06:02.64: [  698]: RECV FAX: begin
> Sep 19 15:06:07.08: [  698]: --> [21:+FDCS:0,5,0,2,1,0,0,1]
> Sep 19 15:06:07.08: [  698]: REMOTE wants 14400 bit/s
> Sep 19 15:06:07.08: [  698]: REMOTE wants page width 1728 pixels in
> 215mm
> Sep 19 15:06:07.08: [  698]: REMOTE wants unlimited page length
> Sep 19 15:06:07.09: [  698]: REMOTE wants 3.85 line/mm
> Sep 19 15:06:07.09: [  698]: REMOTE wants 2-D MR
> Sep 19 15:06:07.09: [  698]: --> [2:OK]
> Sep 19 15:06:07.09: [  698]: <-- [7:AT+FDR\\\\r]
> Sep 19 15:06:08.52: [  698]: --> [5:+FCFR]
> Sep 19 15:06:08.52: [  698]: --> [21:+FDCS:0,5,0,2,1,0,0,1]
> Sep 19 15:06:08.52: [  698]: REMOTE wants 14400 bit/s
> Sep 19 15:06:08.52: [  698]: REMOTE wants page width 1728 pixels in
> 215mm
> Sep 19 15:06:08.53: [  698]: REMOTE wants unlimited page length
> Sep 19 15:06:08.53: [  698]: REMOTE wants 3.85 line/mm
> Sep 19 15:06:08.53: [  698]: REMOTE wants 2-D MR
> Sep 19 15:06:09.08: [  698]: --> [7:CONNECT]
> Sep 19 15:06:09.08: [  698]: RECV: begin page
> Sep 19 15:06:09.08: [  698]: RECV: send trigger 022
> Sep 19 15:06:09.08: [  698]: <-- data [1]
> Sep 19 15:06:20.69: [  698]: RECV: 19029 bytes of data, 1072 total
> lines
> Sep 19 15:06:20.70: [  698]: --> [15:+FPTS:1,0,0,0,0]
> Sep 19 15:06:21.98: [  698]: --> [6:+FET:0]
> Sep 19 15:06:21.98: [  698]: RECV recv MPS (more pages, same document)
> Sep 19 15:06:21.98: [  698]: --> [2:OK]
> Sep 19 15:06:21.99: [  698]: RECV send MCF (message confirmation)
> Sep 19 15:06:21.99: [  698]: RECV FAX (00007400): from , page 1 in 0:14,
> INF, 
> 3.85 line/mm, 2-D MR, 14400 bit/s
> Sep 19 15:06:21.99: [  698]: <-- [7:AT+FDR\\\\r]
> Sep 19 15:06:24.00: [  698]: --> [7:CONNECT]
> Sep 19 15:06:24.00: [  698]: RECV: begin page
> Sep 19 15:06:24.00: [  698]: RECV: send trigger 022
> Sep 19 15:06:24.00: [  698]: <-- data [1]
> Sep 19 15:06:43.15: [  698]: RECV: 32724 bytes of data, 967 total
> lines
> Sep 19 15:06:50.66: [  698]: RECV: 13393 bytes of data, 1371 total
> lines
> Sep 19 15:06:50.67: [  698]: --> [15:+FPTS:1,0,0,0,0]
> Sep 19 15:06:51.95: [  698]: --> [6:+FET:2]
> Sep 19 15:06:51.95: [  698]: RECV recv EOP (no more pages or
> documents)
> Sep 19 15:06:51.95: [  698]: --> [2:OK]
> Sep 19 15:06:51.96: [  698]: RECV send MCF (message confirmation)
> Sep 19 15:06:51.96: [  698]: RECV FAX (00007400): from , page 2 in 0:30,
> INF, 
> 3.85 line/mm, 2-D MR, 14400 bit/s
> Sep 19 15:06:51.96: [  698]: RECV FAX (00007400): recvq/fax00397.tif
> from, 
> route to <unspecified>, 2 pages in 0:49
> Sep 19 15:06:51.96: [  698]: <-- [7:AT+FDR\\\\r]
> Sep 19 15:06:54.66: [  698]: --> [7:+FHNG:0]
> Sep 19 15:06:54.66: [  698]: REMOTE HANGUP: Normal and proper end of
> connection 
> (code 0)
> Sep 19 15:06:54.66: [  698]: RECV FAX: 
> bin/faxrcvd \\\"recvq/fax00397.tif\\\" \\\"ttyS2\\\" \\\"00007400\\\" \\\"\\\"
> 
> ------------------------------------------------------------------------------
-
> # Configuration for a Multi-Tech MT1432, MT224BA, and MT1932ZDX
> modems.
> #
> # MT1432        firmware rev 0307 I or newer
> # MT132BG       rev 0109A
> # MT1932ZDX     rev 0109H
> #
> # Note that MT1432 modems come in several varieties:
> #
> # MT1432BA      uses Rockwell data pump
> # MT1432BA/A    uses AT&T data pump
> # MT1432BG      MT1432BA tweaked for German FCC
> # MT1432MK      (for UK?)
> #
> # The modem has been tried with both XON/XOFF and RTS/CTS flow
> # control; this configuration is for hardware flow control.
> #
> #
> CountryCode:            1
> AreaCode:               953
> FAXNumber:              1.952.593.9787
> LongDistancePrefix:     1
> InternationalPrefix:    011
> DialStringRules:        etc/dialrules
> 
> ServerTracing:          1
> SessionTracing:         11
> RecvFileMode:           0600
> LogFileMode:            0600
> DeviceMode:             0600
> RingsBeforeAnswer:      1
> SpeakerVolume:          off
> GettyArgs:              \\\"-h %l dx_%s\\\"
> LocalIdentifier:        \\\"BUFFALO WILD WINGS\\\"
> TagLineFont:            etc/lutRS18.pcf
> TagLineFormat:          \\\"From %%l|%c|Page %%P of %%T\\\"
> MaxRecvPages:           50
> #
> #
> # Modem-related stuff: should reflect modem command interface
> # and hardware connection/cabling (e.g. flow control).
> #
> ModemType:              Class2          # use class 2 interface
> ModemRate:              38400           # lock rate for DCE-DTE
> communication
> ModemFlowControl:       rtscts          # default
> #
> ModemHardFlowCmd:       AT&E4           # hardware flow control
> ModemSoftFlowCmd:       AT&E5           # software flow control
> ModemSetupDTRCmd:       AT&D3           # setup so DTR drop resets
> modem
> ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier
> (or not)
> ModemSetupAACmd:        AT+FAA=1        # enable adaptive-answer in
> class 2
> ModemRecvFillOrder:     LSB2MSB         # Suppose to be the right option
> for 
> Multitech, other option MSB2LSB
> #
> # NB: some models get confused by the @
> #
> ModemDialCmd:           ATDT%s@         # T for tone dialing, @ for
> silence
> #
> RecvDataFormat:         adaptive
> Class2RecvDataTrigger:  \\\"\\\\022\\\"          # character sent to modem to
> start recv
> ~
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org <
> /dev/null
> 



Josh Welch
Computer Support Specialist
Buffalo Wild Wings
952-278-9557


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null