Re: [hylafax-users] (No subject)Date: Tue, 21 Aug 2001 07:50:17 -0500

["Josh Welch" <jwelch@buffalowildwings.com>]

I had something not unlike this that Lee helped me with. I had two modems I
wanted to only receive, one that would only send. The sending modem was on
an outbound only phone line, so no problem there. For the two receiving
modems, I added a line
ModemReadyState            B
Which would pass a busy state to faxgetty when the modem was queried for use
in sending a fax, if I read that correctly. If you add that line to one of
the config files, that modem should only receive. It's not grouping, but
maybe this will help.
Josh
----- Original Message -----
From: "Guillaume Delorme" <guillaume.delorme@ard.fr>
To: <hylafax-users@hylafax.org>
Sent: Tuesday, August 21, 2001 7:03 AM
Subject: [hylafax-users]


> Hi all
> I have a hylafax server with two modems running.
> I'd like to set Groups of modems :
> one group with the 2 modems (1&2) both receiving faxes
> another group with only one modem (1 or 2) which send faxes
> how can I do that?
> I know how to set group of modems but I don't understand how to configure
> those group to do what I want
>
> I run hylafax-4.1 on Redhat 7.1
>
> Thanks !
>
>
>
>
> ____________________ HylaFAX(tm) Users Mailing List
_______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null
>



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null