Re: [hylafax-users] ZyXel Omni56K can't send fax

[Denis A Ustimenko <denis@oldham.ru>]

Hi!

On Fri, 10 Aug 2001, Bernd Proissl wrote:

> > or city it can't connect. Any ideas?
>
> Have you tried with more than one destination outside?

yes

> Maybe ATX3 helps?

Which way? I tried it but get NO CARRIER.

> Do you have a digital phone line?

No, moreover, fax receiving works good.

>
> no need to repreat it gain,
> modem may also ignore anything behind ATZ

Uagh!!! fixed, thanks.

> you have to dial 9 and 8 to get and outside line?

Yes, I check my dial command by calling to my cell phone, I receive rings.

> maybe check with your hylafax dialrules.

I don't touch etc/dialrules.

Here is fresh log.
Denis
--------
��� 10 14:43:27.08: [21833]: SESSION BEGIN 00000662 74242721466
��� 10 14:43:27.08: [21833]: HylaFAX (tm) Version 4.1
��� 10 14:43:27.08: [21833]: SEND FAX: JOB 70 DEST 8,4242721466 COMMID
00000662
��� 10 14:43:27.08: [21833]: DEVICE '/dev/cua0'
��� 10 14:43:27.08: [21833]: MODEM set DTR OFF
��� 10 14:43:27.08: [21833]: DELAY 75 ms
��� 10 14:43:27.16: [21833]: MODEM set DTR ON
��� 10 14:43:27.16: [21833]: DELAY 2600 ms
��� 10 14:43:29.76: [21833]: MODEM set baud rate: 38400 baud, input flow
RTS/CTS, output flow RTS/CTS
��� 10 14:43:29.76: [21833]: MODEM flush i/o
��� 10 14:43:29.76: [21833]: <-- [4:ATZ\r]
��� 10 14:43:29.90: [21833]: --> [2:OK]
��� 10 14:43:29.90: [21833]: <-- [31:AT&B1&N0&S0S18=4S38.3=1*p4s8=6\r]
��� 10 14:43:29.95: [21833]: --> [30:AT&B1&N0&S0S18=4S38.3=1*p4s8=6]
��� 10 14:43:29.95: [21833]: --> [2:OK]
��� 10 14:43:29.95: [21833]: <-- [5:ATE0\r]
��� 10 14:43:29.95: [21833]: --> [4:ATE0]
��� 10 14:43:29.96: [21833]: --> [2:OK]
��� 10 14:43:29.96: [21833]: <-- [5:ATV1\r]
��� 10 14:43:29.98: [21833]: --> [2:OK]
��� 10 14:43:29.98: [21833]: <-- [5:ATQ0\r]
��� 10 14:43:30.00: [21833]: --> [2:OK]
��� 10 14:43:30.00: [21833]: <-- [7:ATS0=0\r]
��� 10 14:43:30.02: [21833]: --> [2:OK]
��� 10 14:43:30.02: [21833]: <-- [7:ATS8=2\r]
��� 10 14:43:30.03: [21833]: --> [2:OK]
��� 10 14:43:30.03: [21833]: <-- [8:ATS7=60\r]
��� 10 14:43:30.06: [21833]: --> [2:OK]
��� 10 14:43:30.06: [21833]: <-- [6:AT&H3\r]
��� 10 14:43:30.09: [21833]: --> [2:OK]
��� 10 14:43:30.09: [21833]: <-- [6:AT&D2\r]
��� 10 14:43:30.11: [21833]: --> [2:OK]
��� 10 14:43:30.11: [21833]: <-- [6:AT&C1\r]
��� 10 14:43:30.13: [21833]: --> [2:OK]
��� 10 14:43:30.13: [21833]: <-- [14:AT+FCLASS=2.0\r]
��� 10 14:43:30.14: [21833]: --> [2:OK]
��� 10 14:43:30.14: [21833]: <-- [9:AT+FLO=2\r]
��� 10 14:43:30.18: [21833]: --> [2:OK]
��� 10 14:43:30.18: [21833]: <-- [9:AT+FPP=0\r]
��� 10 14:43:30.20: [21833]: --> [2:OK]
��� 10 14:43:30.20: [21833]: <-- [9:AT+FBO=0\r]
��� 10 14:43:30.23: [21833]: --> [2:OK]
��� 10 14:43:30.23: [21833]: <-- [10:AT+FCT=30\r]
��� 10 14:43:30.25: [21833]: --> [2:OK]
��� 10 14:43:30.25: [21833]: <-- [15:AT+FNR=1,1,1,1\r]
��� 10 14:43:30.27: [21833]: --> [2:OK]
��� 10 14:43:30.27: [21833]: <-- [9:AT+FIE=0\r]
��� 10 14:43:30.30: [21833]: --> [2:OK]
��� 10 14:43:30.30: [21833]: <-- [9:AT+FBU=1\r]
��� 10 14:43:30.32: [21833]: --> [2:OK]
��� 10 14:43:30.32: [21833]: <-- [23:AT+FCC=1,3,2,0,1,0,0,0\r]
��� 10 14:43:30.35: [21833]: --> [2:OK]
��� 10 14:43:30.35: [21833]: <-- [5:ATM0\r]
��� 10 14:43:30.36: [21833]: --> [2:OK]
��� 10 14:43:30.36: [21833]: STATE CHANGE: RUNNING -> SENDING
��� 10 14:43:30.36: [21833]: MODEM input buffering enabled
��� 10 14:43:30.39: [21833]: <-- [14:AT+FCLASS=2.0\r]
��� 10 14:43:30.52: [21833]: --> [2:OK]
��� 10 14:43:30.52: [21833]: <-- [9:AT+FLO=2\r]
��� 10 14:43:30.65: [21833]: --> [2:OK]
��� 10 14:43:30.65: [21833]: <-- [9:AT+FPP=0\r]
��� 10 14:43:30.78: [21833]: --> [2:OK]
��� 10 14:43:30.78: [21833]: <-- [9:AT+FBO=0\r]
��� 10 14:43:30.91: [21833]: --> [2:OK]
��� 10 14:43:30.91: [21833]: <-- [10:AT+FCT=30\r]
��� 10 14:43:31.03: [21833]: --> [2:OK]
��� 10 14:43:31.03: [21833]: <-- [15:AT+FNR=1,1,1,1\r]
��� 10 14:43:31.15: [21833]: --> [2:OK]
��� 10 14:43:31.15: [21833]: <-- [9:AT+FIE=0\r]
��� 10 14:43:31.27: [21833]: --> [2:OK]
��� 10 14:43:31.27: [21833]: <-- [9:AT+FBU=1\r]
��� 10 14:43:31.39: [21833]: --> [2:OK]
��� 10 14:43:31.39: [21833]: <-- [23:AT+FCC=1,3,2,0,1,0,0,0\r]
��� 10 14:43:31.52: [21833]: --> [2:OK]
��� 10 14:43:31.52: [21833]: <-- [16:AT+FLI="oldham"\r]
��� 10 14:43:31.64: [21833]: --> [2:OK]
��� 10 14:43:31.64: [21833]: DIAL 8,4242721466
��� 10 14:43:31.64: [21833]: <-- [19:ATDT9w8,4242721466\r]
��� 10 14:44:33.70: [21833]: --> [10:NO CARRIER]
��� 10 14:44:33.70: [21833]: SEND FAILED: JOB 70 DEST 8,4242721466 ERR No
carrier detected
��� 10 14:44:33.70: [21833]: MODEM set DTR OFF
��� 10 14:44:33.70: [21833]: STATE CHANGE: SENDING -> MODEMWAIT (timeout
5)
��� 10 14:44:33.70: [21833]: SESSION END




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null