[hylafax-users] configuration for USR/3COM 56K voice PCI modem

["Kurt R. Rahlfs" <kurtrr@computer.org>]

I read in one of the mails to this list about some configurations that I do 
not find on my SuSE 7.1 distribution.  I can not find the configurations on 
the hylafax web site.  I am trying to find a configuration that will work for 
my Dell 56K PCI voice-fax-modem.  (It seems to have a couple of moniker in 
the documentation and yet another when the modem is probed.)  I am running 
this on a Dell 4100 Pentium III system.

I am not familiar with many of the terms used in talking about modem or fax 
interfaces and the modem HOWTO didn't shed much light on the subject for this 
project so any help will be appreciated.

I have included the output of probemodem as this was suggested in the 
previous posting I read.  BTW I had faxgetty running when I ran this.

TIA, Kurt Rahlfs
----------------

Serial port that modem is connected to []? 
Now we are going to probe the tty port.  This takes a few seconds,
so be patient.  Note that if you do not have the modem cabled to
the port, or the modem is turned off, this may hang (just go and
cable up the modem or turn it on, or whatever).

Probing for best speed to talk to modem: 38400 OK.
[1]+  Terminated              ( trap 0 1 2; while true; do
    sleep 10; echo ""; echo "Hmm, something seems to be hung, check your 
modem eh?";
done )

This looks like a Class 1+2.0 modem.

/bin/stty: standard input: unable to perform all requested operations
ATI0     RESULT = "OK"   RESPONSE = "5601"
/bin/stty: standard input: unable to perform all requested operations
ATI1     RESULT = "OK"   RESPONSE = "6511"
/bin/stty: standard input: unable to perform all requested operations
ATI2     RESULT = "OK"   RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
ATI3     RESULT = "OK"   RESPONSE = "U.S. Robotics 56K Voice INT V5.19.1"

Class 1 stuff...

/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=?      RESULT = "OK"   RESPONSE = "0,1,2.0,8"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS?       RESULT = "OK"   RESPONSE = "2.0"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=0      RESULT = "OK"   RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=1      RESULT = "OK"   RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS?       RESULT = "OK"   RESPONSE = "1"
/bin/stty: standard input: unable to perform all requested operations
AT+FJUNK=?       RESULT = "ERROR"        RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FJUNK?        RESULT = "ERROR"        RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FAA=?         RESULT = "OK"   RESPONSE = "(0,1)"
/bin/stty: standard input: unable to perform all requested operations
AT+FAA?  RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FAE=?         RESULT = "ERROR"        RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FAE?  RESULT = "ERROR"        RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FTH=?         RESULT = "OK"   RESPONSE = 
"3,24,48,72,73,74,96,97,98,121,122,145,146"
/bin/stty: standard input: unable to perform all requested operations
AT+FRH=?         RESULT = "OK"   RESPONSE = 
"3,24,48,72,73,74,96,97,98,121,122,145,146"
/bin/stty: standard input: unable to perform all requested operations
AT+FTM=?         RESULT = "OK"   RESPONSE = 
"3,24,48,72,73,74,96,97,98,121,122,145,146"
/bin/stty: standard input: unable to perform all requested operations
AT+FRM=?         RESULT = "OK"   RESPONSE = 
"3,24,48,72,73,74,96,97,98,121,122,145,146"
/bin/stty: standard input: unable to perform all requested operations
AT+FTS=?         RESULT = "ERROR"        RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FRS=?         RESULT = "ERROR"        RESPONSE = "ERROR"

Class 2.0 stuff...

/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=?      RESULT = "OK"   RESPONSE = "0,1,2.0,8"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS?       RESULT = "OK"   RESPONSE = "1"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=0      RESULT = "OK"   RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=1      RESULT = "OK"   RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=2.0    RESULT = "OK"   RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS?       RESULT = "OK"   RESPONSE = "2.0"
/bin/stty: standard input: unable to perform all requested operations
AT+FJU=?         RESULT = "ERROR"        RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FJU?  RESULT = "ERROR"        RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FDR=?         RESULT = "ERROR"        RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FDT=?         RESULT = "ERROR"        RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FIP=?         RESULT = "OK"   RESPONSE = "000"
/bin/stty: standard input: unable to perform all requested operations
AT+FAA=?         RESULT = "OK"   RESPONSE = "(0,1)"
/bin/stty: standard input: unable to perform all requested operations
AT+FAA?  RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FBS?  RESULT = "OK"   RESPONSE = "1800,4000"
/bin/stty: standard input: unable to perform all requested operations
AT+FBO=?         RESULT = "OK"   RESPONSE = "(0,1)"
/bin/stty: standard input: unable to perform all requested operations
AT+FBO?  RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FBU=?         RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FBU?  RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FCC=?         RESULT = "OK"   RESPONSE = 
"(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7)"
/bin/stty: standard input: unable to perform all requested operations
AT+FCC?  RESULT = "OK"   RESPONSE = "1,5,0,2,0,0,0,5"
/bin/stty: standard input: unable to perform all requested operations
AT+FCQ=?         RESULT = "OK"   RESPONSE = "(0-2),(0-2)"
/bin/stty: standard input: unable to perform all requested operations
AT+FCQ?  RESULT = "OK"   RESPONSE = "1,0"
/bin/stty: standard input: unable to perform all requested operations
AT+FCR=?         RESULT = "OK"   RESPONSE = "(0,1)"
/bin/stty: standard input: unable to perform all requested operations
AT+FCR?  RESULT = "OK"   RESPONSE = "1"
/bin/stty: standard input: unable to perform all requested operations
AT+FCS=?         RESULT = "ERROR"        RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FCS?  RESULT = "OK"   RESPONSE = "0,0,0,0,0,0,0,0"
/bin/stty: standard input: unable to perform all requested operations
AT+FCT=?         RESULT = "OK"   RESPONSE = "(0-255)"
/bin/stty: standard input: unable to perform all requested operations
AT+FCT?  RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FEA=?         RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FEA?  RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FFC=?         RESULT = "OK"   RESPONSE = "0,0,0,0"
/bin/stty: standard input: unable to perform all requested operations
AT+FFC?  RESULT = "OK"   RESPONSE = "0,0,0, "
/bin/stty: standard input: unable to perform all requested operations
AT+FHS=?         RESULT = "ERROR"        RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FHS?  RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FIE=?         RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FIE?  RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FIS=?         RESULT = "OK"   RESPONSE = 
"(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7)"
/bin/stty: standard input: unable to perform all requested operations
AT+FIS?  RESULT = "OK"   RESPONSE = "1,5,0,2,0,0,0,5"
/bin/stty: standard input: unable to perform all requested operations
AT+FLI=?         RESULT = "OK"   RESPONSE = "(20-7E)"
/bin/stty: standard input: unable to perform all requested operations
AT+FLI?  RESULT = "OK"   RESPONSE = """"
/bin/stty: standard input: unable to perform all requested operations
AT+FLO=?         RESULT = "OK"   RESPONSE = "(0-2)"
/bin/stty: standard input: unable to perform all requested operations
AT+FLO?  RESULT = "OK"   RESPONSE = "1"
/bin/stty: standard input: unable to perform all requested operations
AT+FLP=?         RESULT = "OK"   RESPONSE = "(0,1)"
/bin/stty: standard input: unable to perform all requested operations
AT+FLP?  RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FMI?  RESULT = "OK"   RESPONSE = "U.S. Robotics 56K Voice"
/bin/stty: standard input: unable to perform all requested operations
AT+FMM?  RESULT = "OK"   RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FMR?  RESULT = "OK"   RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FMS=?         RESULT = "OK"   RESPONSE = "(0-5)"
/bin/stty: standard input: unable to perform all requested operations
AT+FMS?  RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FNR=?         RESULT = "OK"   RESPONSE = "(0,1),(0,1),(0,1),(0,1)"
/bin/stty: standard input: unable to perform all requested operations
AT+FNR?  RESULT = "OK"   RESPONSE = "0,0,0,0"
/bin/stty: standard input: unable to perform all requested operations
AT+FNS=?         RESULT = "OK"   RESPONSE = "(20-7E)"
/bin/stty: standard input: unable to perform all requested operations
AT+FNS?  RESULT = "OK"   RESPONSE = """"
/bin/stty: standard input: unable to perform all requested operations
AT+FPI=?         RESULT = "OK"   RESPONSE = "(20-7E)"
/bin/stty: standard input: unable to perform all requested operations
AT+FPI?  RESULT = "OK"   RESPONSE = """"
/bin/stty: standard input: unable to perform all requested operations
AT+FPP=?         RESULT = "OK"   RESPONSE = "(0,1)"
/bin/stty: standard input: unable to perform all requested operations
AT+FPP?  RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FPR=?         RESULT = "OK"   RESPONSE = "(0,1,2,4,8,16,24)"
/bin/stty: standard input: unable to perform all requested operations
AT+FPR?  RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FPS=?         RESULT = "OK"   RESPONSE = "(1-5)"
/bin/stty: standard input: unable to perform all requested operations
AT+FPS?  RESULT = "OK"   RESPONSE = "1"
/bin/stty: standard input: unable to perform all requested operations
AT+FRQ=?         RESULT = "OK"   RESPONSE = "(0-2),(0-2)"
/bin/stty: standard input: unable to perform all requested operations
AT+FRQ?  RESULT = "OK"   RESPONSE = "0,N"
/bin/stty: standard input: unable to perform all requested operations
AT+FRY=?         RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FRY?  RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FSP=?         RESULT = "OK"   RESPONSE = "(0,1)"
/bin/stty: standard input: unable to perform all requested operations
AT+FSP?  RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FKS=?         RESULT = "OK"   RESPONSE = "000"


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null