HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] remote clients cannot send fax




> On Wed, 18 Jul 2001 12:39:36 +0800 (HKT), you wrote:
> Maybe you don't have a firewall on the server, but you have it on the
> client (or in any device between the server and the client)?
> HylaFAX protocol is like ftp, where the server opens a connection to
> the client (data connection).
> 
> -- 
> giulioo@pobox.com

I'm sure I don't have any firewall between the server and the clients.
I can use ftp as normal. 

Now I find something really strange...
On the fax server, I tried 'sendfax -vv' and then followed with a 
telnet session...
====== START sendfax ========================================
$ sendfax -vv -n -d 12345789 /etc/group
Trying localhost (127.0.0.1) at port 4559...
Connected to localhost.localdomain.
220 xxx.xxx.com server (HylaFAX (tm) Version 4.1) ready.
-> USER foo
230 User foo logged in.
match against (..., 494)
rule: offset 0 string = "%!" -- failed (comparison)

      [--chopped--]

CONVERT "/usr/sbin/textfmt -B -f Courier-Bold   -Ml=0.4in -p 11 -s default 
>/tmp
//sndfaxNrNTne </etc/group"
Apply DisplayNumber rules to "12345789"
--> return result "12345789"
-> TYPE I
200 Type set to Image.
SEND compressed data, 6376 bytes
-> PORT 127,0,0,1,8,3
200 PORT command successful.
-> MODE Z
200 Mode set to ZIP.
-> STOT
150 FILE: /tmp/doc2150.ps (Opening new data connection).
SEND 2399 bytes transmitted (2.7x compression)
226 Transfer complete (FILE: /tmp/doc2150.ps).
-> JNEW
200 New job created: jobid: 2110 groupid: 2110.

   [--chopped--]

200 Job 2110 submitted.
request id is 2110 (group id 2110) for host localhost (1 file)
============= END sendfax ===================================

OK, the job is created.  Now I follow the commands in the telnet
session...

============= START telnet ==================================
$ telnet localhost 4559
Trying 127.0.0.1...
Connected to localhost.localdomain.
Escape character is '^]'.
220 xxx.xxx.com server (HylaFAX (tm) Version 4.1) ready.
user foo
230 User foo logged in.
type i
200 Type set to Image.
port 127,0,0,1,8,3
200 PORT command successful.
mode z
200 Mode set to ZIP.
stot
425 Cannot build data connection: Connection refused.
============= END telnet =====================================

What's going on here!? 
Thanks for your attentions. 

Best regards,
  Alex



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions