Re: [hylafax-users] Similar USR 33.6 problem ?

[Lee Howard <faxguy@deanox.com>]

At 09:47 PM 7/7/01 +0200, Ekkehard Goerlach wrote:
>
>>From a recent thread (Alberto Raviola/Lee Howard) I see that a log from a
>failed session like
>
>Jul 07 20:55:21.18: [ 3899]: SESSION BEGIN 00000021 4964441010
>Jul 07 20:55:21.19: [ 3899]: HylaFAX (tm) Version 4.1
>Jul 07 20:55:21.19: [ 3899]: SEND FAX: JOB 23 DEST 06876-1510 COMMID 00000021
>Jul 07 20:55:21.19: [ 3899]: DEVICE '/dev/ttyS1'
>Jul 07 20:55:21.19: [ 3899]: DELAY 75 ms
>Jul 07 20:55:21.27: [ 3899]: DELAY 2600 ms
>Jul 07 20:55:23.87: [ 3899]: <-- [4:ATZ\r]
>Jul 07 20:55:24.00: [ 3899]: --> [2:OK]
>Jul 07 20:55:24.00: [ 3899]: <-- [5:ATE0\r]
>Jul 07 20:55:29.00: [ 3899]: MODEM <Timeout>
>Jul 07 20:55:29.00: [ 3899]: DELAY 75 ms
>Jul 07 20:55:29.08: [ 3899]: DELAY 2600 ms
>Jul 07 20:55:31.68: [ 3899]: <-- [4:ATZ\r]
>Jul 07 20:55:31.82: [ 3899]: --> [3:ATZ]
>Jul 07 20:55:31.82: [ 3899]: --> [2:OK]
>Jul 07 20:55:31.82: [ 3899]: <-- [5:ATE0\r]
>Jul 07 20:55:36.81: [ 3899]: MODEM <Timeout>
>Jul 07 20:55:36.81: [ 3899]: SEND FAILED: JOB 23 DEST 06876-1510 ERR Can
not setup modem
>Jul 07 20:55:36.81: [ 3899]: SESSION END
>
>points to a wrecked USR modem? Or is there still some hope? 

In his case, the modem was defective.

>The answer to "ATS25?" in my case is 005 (seems to be the factory setting).

This means that the modem is requiring at least 50 ms for DTR to drop, and
the default setting for Class1DTRDropDelay (HylaFAX-4.1-release) is 75 ms.

If you're using 4.1-release, then there's only two things you can try in
hopes of the modem not being defective...

Perhaps ATZ is not the correct string for your ModemSoftResetCmd.  Refer to
your manual and perhaps try ATZ1 or something similar.

Perhaps ATE0 is not the correct string for your ModemEchoOffCmd.  Refer to
your manual and perhaps try something similar.

If you continue to have this trouble afterwards... then I highly suspect
the modem is defective.

Lee.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null