Re: [hylafax-users] Line busy ....

[Wouter Vijvers <woutje@chello.nl>]

Hi,
This is supposed to be a reply to my former question, but I can't reply due to a crappy webmail program.

>>By the way, there is another modem connected to the phone-line (using the
>>'phone' out on the Zoom modem). Can that cause trouble?

>It can, but not likely if it is not trying to receive the fax also.

I am now certain that this is not the problem. I put the other modem on a different line and tried to send a fax from there. Didn't work...

>>What value of SessionTracing should I
>>set to maybe get more useful error messages?

>0xFFF

I did this, but now my logfile looks like:
--------------------
Jun 25 11:36:14.28: [  218]: SESSION BEGIN 00000012 31207725919
Jun 25 11:36:14.28: [  218]: <-- [4:ATA\r]
Jun 25 11:39:14.29: [  218]: MODEM TIMEOUT: reading line from modem
Jun 25 11:39:14.30: [  218]: ANSWER: Ring detected without successful handshake
Jun 25 11:39:14.31: [  218]: SESSION END
-------------------

The only bonus is the modem timeout line.

>You can try turning off adaptive answer and/or forcing >AT+FCLASS=1A to be issued for the answer string.  However, >if that doesn't work... then this could be a hardware >incompatibility between the two modems.

So I should put 'AdaptiveAnswer No' in my config? And add 'ModemAnswerCmd AT+FCLASS=1A' (the default is ATA, right? No such line is in my config now.)? Sorry if this sounds newbie, but it is :).

I'm sorry if this mail has messed up layout.

Regards,
Wouter





____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null