Re: [hylafax-users] Line busy while it's not

[Lee Howard <faxguy@deanox.com>]

At 09:37 PM 6/24/01 +0200, Wouter Vijvers wrote:
>By the way, there is another modem connected to the phone-line (using the
>'phone' out on the Zoom modem). Can that cause trouble?

It can, but not likely if it is not trying to receive the fax also.

> The other modem can
>be used to connect to the internet. What value of SessionTracing should I
>set to maybe get more useful error messages?

0xFFF

>> When trying to receive a fax (sent using Cheyenne Bitware on Win95, but
>> that's not the problem) I get a "0x8111: Phone is busy" error in Bitware
>and
>> the following one in log/c00000000x:
>> Jun 24 20:43:45.77: [  218]: SESSION BEGIN 00000011 312077xxxxx
>> Jun 24 20:43:45.78: [  218]: <-- [4:ATA\r]
>> Jun 24 20:46:45.79: [  218]: ANSWER: Ring detected without successful
>> handshake
>> Jun 24 20:46:45.79: [  218]: SESSION END

You can try turning off adaptive answer and/or forcing AT+FCLASS=1A to be
issued for the answer string.  However, if that doesn't work... then this
could be a hardware incompatibility between the two modems.

Lee.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null