Re: [hylafax-users] faxstat

[Gregor Fajdiga <Gregor.Fajdiga@select-tech.si>]

I have also wondered about faxstat, because I have two modems
configured but it only shows one modem.

Modem ttyS0 (1111111): Waiting for modem to come ready

-
regards,

gregor.

On Thu, 21 Jun 2001 12:31:47 +0200
Giulio Orsero <giulioo@pobox.com> wrote:

> On Thu, 21 Jun 2001 12:32:40 +0200, you wrote:
> 
> >faxstat always says:
> >HylaFAX scheduler on faxsrv: Running
> >Modem ttyS0 (1111111): Waiting for modem to come ready
> 
> >even if I say cu -l /dev/ttyS0 and then ATZ and then close connection,
> >file still exists. is it up to hylafax to manage (erase, update or
> >whatever) this file, or should I erase it. even if I restart hylafax
> >this file still exists.
> >
> >I have send only environment, without any faxgetty and faxaddmodem was
> >run for each configured modem.
> If you use faxmodem, instead of faxgetty, the status reported by faxstat will be
> different:
> 1-after installing HylaFAX for the first time and before sending the 1st fax,
> the modem status won't be shown
> 2- after sending the 1st fax, the status will always be
> Modem ttySX (+12345678): Waiting for modem to come ready
> when the modem is idle
> 3- only while sending a fax the status will be changed to "initializing server"
> and "sending job xxx"
> 
> -- 
> giulioo@pobox.com
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null