![]() |
Hi, Is anyone can explain that message? What the sender thinks? Is it a successfull send or not? Hylafax4.1rc1 - ZyXEL Omni288S class2.0 Imre. The HylaFAX Receive Agent wrote: > > An attempt to receive facsimile on ttyM3 failed because: > > Normal and proper end of connection > > ---- Transcript of session follows ---- > > Jun 18 13:38:58.99: [ 293]: SESSION BEGIN 00054417 3613472020 > Jun 18 13:38:58.99: [ 293]: <-- [4:ATA\r] > Jun 18 13:39:11.70: [ 293]: --> [4:+FCO] > Jun 18 13:39:11.70: [ 293]: ANSWER: FAX CONNECTION > Jun 18 13:39:11.70: [ 293]: RECV FAX: begin > Jun 18 13:39:14.48: [ 293]: --> [28:+FTI:" 2042878" ] > Jun 18 13:39:14.48: [ 293]: REMOTE TSI "2042878" > Jun 18 13:39:14.48: [ 293]: --> [20:+FCS:0,3,0,2,1,0,0,0] > Jun 18 13:39:14.48: [ 293]: REMOTE wants 9600 bit/s > Jun 18 13:39:14.48: [ 293]: REMOTE wants page width 1728 pixels in 215 mm > Jun 18 13:39:14.48: [ 293]: REMOTE wants unlimited page length > Jun 18 13:39:14.48: [ 293]: REMOTE wants 3.85 line/mm > Jun 18 13:39:14.48: [ 293]: REMOTE wants 2-D MR > Jun 18 13:39:14.48: [ 293]: --> [2:OK] > Jun 18 13:39:14.48: [ 293]: <-- [7:AT+FDR\r] > Jun 18 13:39:16.04: [ 293]: --> [20:+FCS:0,3,0,2,1,0,0,0] > Jun 18 13:39:16.04: [ 293]: REMOTE wants 9600 bit/s > Jun 18 13:39:16.04: [ 293]: REMOTE wants page width 1728 pixels in 215 mm > Jun 18 13:39:16.04: [ 293]: REMOTE wants unlimited page length > Jun 18 13:39:16.04: [ 293]: REMOTE wants 3.85 line/mm > Jun 18 13:39:16.04: [ 293]: REMOTE wants 2-D MR > Jun 18 13:39:16.60: [ 293]: --> [7:CONNECT] > Jun 18 13:39:16.60: [ 293]: RECV: begin page > Jun 18 13:39:16.60: [ 293]: RECV: send trigger 022 > Jun 18 13:39:43.86: [ 293]: RECV: 32648 bytes of data, 179 total lines > Jun 18 13:40:10.71: [ 293]: RECV: 32767 bytes of data, 457 total lines > Jun 18 13:40:38.03: [ 293]: RECV: 32759 bytes of data, 639 total lines > Jun 18 13:41:05.06: [ 293]: RECV: 32674 bytes of data, 813 total lines > Jun 18 13:41:32.28: [ 293]: RECV: 32706 bytes of data, 978 total lines > Jun 18 13:42:00.57: [ 293]: RECV: 32480 bytes of data, 1092 total lines > Jun 18 13:42:00.57: [ 293]: --> [17:+FPS:2,41F,92,5,0] > Jun 18 13:42:04.79: [ 293]: --> [6:+FET:2] > Jun 18 13:42:04.79: [ 293]: RECV recv EOP (no more pages or documents) > Jun 18 13:42:04.79: [ 293]: --> [5:ERROR] > Jun 18 13:42:04.79: [ 293]: MODEM Command error > Jun 18 13:42:04.79: [ 293]: RECV send RTN (retrain negative) > Jun 18 13:42:04.79: [ 293]: <-- [7:AT+FDR\r] > Jun 18 13:42:08.05: [ 293]: --> [7:+FHS:00] > Jun 18 13:42:08.05: [ 293]: REMOTE HANGUP: Normal and proper end of connection (code 0) > Jun 18 13:42:08.05: [ 293]: RECV FAX (00054417): recvq/fax18284.tif from 2042878, route to <unspecified>, 0 pages in 2:57 > Jun 18 13:42:08.05: [ 293]: RECV FAX: Normal and proper end of connection > Jun 18 13:42:08.06: [ 293]: RECV FAX (00054417): session with 2042878 terminated abnormally: Normal and proper end of connection > Jun 18 13:42:08.06: [ 293]: RECV FAX: bin/faxrcvd "recvq/fax18284.tif" "ttyM3" "00054417" "Normal and proper end of connection" ____________________ HylaFAX(tm) Users Mailing List _______________________ To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null