HylaFAX The world's most advanced open source fax server |
Hi HylaFAX users, I use a a ZyXEL omni288 modem with class2. I get that message, while I receive: T.30 T2 timeout, expected page not received Jun 13 14:23:03.62: [29663]: SESSION BEGIN 00053138 3613472020 Jun 13 14:23:03.62: [29663]: <-- [4:ATA\r] Jun 13 14:23:16.60: [29663]: --> [5:+FCON] Jun 13 14:23:16.60: [29663]: ANSWER: FAX CONNECTION Jun 13 14:23:16.60: [29663]: RECV FAX: begin Jun 13 14:23:20.50: [29663]: --> [29:+FTSI:" " ] Jun 13 14:23:20.50: [29663]: REMOTE TSI "" Jun 13 14:23:20.50: [29663]: --> [21:+FDCS:0,5,0,2,0,0,0,3] Jun 13 14:23:20.50: [29663]: REMOTE wants 14400 bit/s Jun 13 14:23:20.50: [29663]: REMOTE wants page width 1728 pixels in 215 mm Jun 13 14:23:20.50: [29663]: REMOTE wants unlimited page length Jun 13 14:23:20.50: [29663]: REMOTE wants 3.85 line/mm Jun 13 14:23:20.50: [29663]: REMOTE wants 1-D MR Jun 13 14:23:20.50: [29663]: --> [2:OK] Jun 13 14:23:20.51: [29663]: <-- [7:AT+FDR\r] Jun 13 14:23:22.06: [29663]: --> [5:+FCFR] Jun 13 14:23:22.06: [29663]: --> [21:+FDCS:0,5,0,2,0,0,0,3] Jun 13 14:23:22.06: [29663]: REMOTE wants 14400 bit/s Jun 13 14:23:22.06: [29663]: REMOTE wants page width 1728 pixels in 215 mm Jun 13 14:23:22.06: [29663]: REMOTE wants unlimited page length Jun 13 14:23:22.06: [29663]: REMOTE wants 3.85 line/mm Jun 13 14:23:22.06: [29663]: REMOTE wants 1-D MR Jun 13 14:23:23.38: [29663]: --> [7:CONNECT] Jun 13 14:23:23.38: [29663]: RECV: begin page Jun 13 14:23:23.38: [29663]: RECV: send trigger 022 Jun 13 14:23:27.30: [29663]: RECV: 3673 bytes of data, 258 total lines Jun 13 14:23:27.30: [29663]: --> [17:+FPTS:1,259,0,0,0] ^^^^ I don't understand the line above. In my documentation the FPTS=n uses only one parameter, not 5. Jun 13 14:23:37.34: [29663]: --> [8:+FHNG:73] Jun 13 14:23:37.34: [29663]: REMOTE HANGUP: T.30 T2 timeout, expected page not received (code 73) Jun 13 14:23:37.34: [29663]: --> [2:OK] Jun 13 14:23:37.35: [29663]: RECV FAX (00053138): recvq/fax17836.tif from , route to <unspecified>, 0 pages in 0:21 Jun 13 14:23:37.35: [29663]: RECV FAX: T.30 T2 timeout, expected page not received Jun 13 14:23:37.35: [29663]: RECV FAX (00053138): session with terminated abnormally: T.30 T2 timeout, expected page not received Jun 13 14:23:37.35: [29663]: RECV FAX: bin/faxrcvd "recvq/fax17836.tif" "ttyM2" "00053138" "T.30 T2 timeout, expected page not received" ^^^^ After that, the HylaFAX deleted the file fax17836.tif. But why? I think the fax came to my host correctly, the only problem was with the postpage response. Imre. ____________________ HylaFAX(tm) Users Mailing List _______________________ To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null