Re: [hylafax-users] faxcover.ps working for sendfax but not Cyphe us

[Curtis Rempel <Curtis.Rempel@corp.shaw.ca>]

The faxcover.ps I posted is a copy of what lives in /usr/local/lib/fax (what
sendfax uses), so, it is before Cypheus processes it.

Bodo said I could just make a copy of it for Cypheus to use or even create a
Samba share to map to the above directory.

The source for BreakIntoLines comes from faxcover and not from the cover
page itself.

Curtis

-----Original Message-----
From: alan [mailto:alan@pair.com]
Sent: May 15, 2001 11:50 AM
To: Curtis Rempel
Cc: 'hylafax-users@hylafax.org'
Subject: Re: [hylafax-users] faxcover.ps working for sendfax but not
Cyphe us


Is the faxcover.ps you posted the ps source after Cypheus processes it
but before you send it to ghostview, or is it before Cypheus processes
it?

It sounds like Cypheus is doing something not quite right.  And in
your faxcover.ps I don't see the source for BreakIntoLines... am I
missing something or isn't it supposed to be in there?

Alan

On Tue, 15 May 2001, Curtis Rempel wrote:

> Well, Bodo was kind enough to have a look at my cover page and after
running
> the PostScript (destined to HylaFax) through GhostView, it produced a
> somewhat slightly more informative error:
> 
> Unrecoverable error: typecheck in search
> Operand stack:
>        300  -93  1783
> 
> --- Begin offending input ---
> 
> --- End offending input ---
> file offset = 37899
> gsdll_execute_cont returns -20
> 
> <<
> 
> As Bodo observed also, as soon as I remove the Postscript code to do
> BreakIntoLines, everything works (but of course no comments).
> 
> The code I'm using (which works with sendfax but not Cypheus), is as
> follows:
> 
> /linewidth 1783 def
> /lineheight -93 def
> /y 1517 def /x 300 def
> linewidth lineheight x y comments BreakIntoLines
> 
> For whatever reason, when used with Cypheus, it produces the above error.
> 
> I will be the first to admit to being a Postscript novice so if anybody
else
> has any ideas, I'd certainly appreciate it.  The cover page is located at
> http://members.home.net/vmsguy/faxcover.ps
> 
> 
> Thanks.
> 
> 
> 
> -----Original Message-----
> From: Curtis Rempel 
> Sent: May 14, 2001 4:11 PM
> To: 'alan'
> Cc: 'hylafax-users@hylafax.org'
> Subject: RE: [hylafax-users] faxcover.ps working for sendfax but not
> Cypheus
> 
> 
> Yes, you're right - faxcover does fill in the required variables.
However,
> according to the author of Cypheus who has contacted me privately, Cypheus
> does the same thing.  He has kindly requested a copy of my cover page to
see
> if it can be reproduced on his system.
> 
> Curtis
> 
> -----Original Message-----
> From: alan [mailto:alan@pair.com]
> Sent: May 14, 2001 7:29 AM
> To: Curtis Rempel
> Cc: 'hylafax-users@hylafax.org'
> Subject: Re: [hylafax-users] faxcover.ps working for sendfax but not
> Cypheus
> 
> 
> I think the faxcover.ps as it is, isn't really a proper .ps document.
> I think you need to run the executable "faxcover" on it to fill in
> some blanks, etc. to create a full postscript page which could be sent
> directly to a printer, for example.  
> 
> I know nothing about Cypheus, so if it's doing this, then I'm sorry I
> don't have anything else to suggest.
> 
> Alan
> 
> On Fri, 11 May 2001, Curtis Rempel wrote:
> 
> > So now I have comments working on the custom cover page and the cover
page
> > itself works great using sendfax.
> > 
> > However, if I use the Cypheus client, I get "%%[ Error: typecheck;
> > OffendingCommand: search ]%%" 
> > 
> > For whatever reason, faxcover.ps in /usr/local/lib/fax works great for
> > sendfax, but when I ftp it (binary or ascii) to my PC and have Cypheus
use
> > it as the cover page, I get this error:
> > 
> > Your facsimile job to 9,7504505 was not sent because document conversion
> > to facsimile failed.  The output from the converter program was:
> > 
> > %%[ Error: typecheck; OffendingCommand: search ]%%
> > AFPL Ghostscript 6.50: Unrecoverable error, exit code 1
> > /bin/cat: write error: Broken pipe
> > 
> > 
> > Check any PostScript documents for non-standard fonts and invalid
> > constructs.
> > 
> >     ---- Unsent job status ----
> > 
> >    Destination: 9,7504505
> >          JobID: 20
> >        GroupID: 20
> >         Sender: curtis
> >       Mailaddr: curtis.rempel@corp.shaw.ca
> > Submitted From: 10.0.12.74
> >     Page Width: 210 (mm)
> >    Page Length: 297 (mm)
> >     Resolution: 98 (lpi)
> >         Status: %%[ Error: typecheck; OffendingCommand: search ]%%
> > AFPL Ghostscript 6.50: Unrecoverable error, exit code 1
> > /bin/cat: write error: Broken pipe
> > 
> >        Dialogs: 0 (exchanges with remote device)
> >          Dials: 0 (consecutive failed calls to destination)
> >          Calls: 0 (total phone calls placed)
> >          Pages: 0 (pages transmitted)
> >       TotPages: 0 (total pages to transmit)
> >       Attempts: 0 (attempts to send current page)
> >         Dirnum: 0 (directory of next page to send)
> > 
> >     ---- Documents submitted for transmission ----
> > 
> > The following documents were submitted for transmission and are
> > available on the server for reuse until they are automatically
> > purged when this job is removed.  Documents may also be manually
> > removed using the faxrm command; consult faxrm(1) for information.
> > 
> > Filename                 Size Type
> > docq/doc20.cover            0 PostScript cover page
> > docq/doc31.ps.20            0 PostScript
> > 
> > 
> > 
> > 
> > ____________________ HylaFAX(tm) Users Mailing List
> _______________________
> >  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org <
> /dev/null
> > 
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List
_______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null
> 


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null