![]() |
Yes, you're right - faxcover does fill in the required variables. However, according to the author of Cypheus who has contacted me privately, Cypheus does the same thing. He has kindly requested a copy of my cover page to see if it can be reproduced on his system. Curtis -----Original Message----- From: alan [mailto:alan@pair.com] Sent: May 14, 2001 7:29 AM To: Curtis Rempel Cc: 'hylafax-users@hylafax.org' Subject: Re: [hylafax-users] faxcover.ps working for sendfax but not Cypheus I think the faxcover.ps as it is, isn't really a proper .ps document. I think you need to run the executable "faxcover" on it to fill in some blanks, etc. to create a full postscript page which could be sent directly to a printer, for example. I know nothing about Cypheus, so if it's doing this, then I'm sorry I don't have anything else to suggest. Alan On Fri, 11 May 2001, Curtis Rempel wrote: > So now I have comments working on the custom cover page and the cover page > itself works great using sendfax. > > However, if I use the Cypheus client, I get "%%[ Error: typecheck; > OffendingCommand: search ]%%" > > For whatever reason, faxcover.ps in /usr/local/lib/fax works great for > sendfax, but when I ftp it (binary or ascii) to my PC and have Cypheus use > it as the cover page, I get this error: > > Your facsimile job to 9,7504505 was not sent because document conversion > to facsimile failed. The output from the converter program was: > > %%[ Error: typecheck; OffendingCommand: search ]%% > AFPL Ghostscript 6.50: Unrecoverable error, exit code 1 > /bin/cat: write error: Broken pipe > > > Check any PostScript documents for non-standard fonts and invalid > constructs. > > ---- Unsent job status ---- > > Destination: 9,7504505 > JobID: 20 > GroupID: 20 > Sender: curtis > Mailaddr: curtis.rempel@corp.shaw.ca > Submitted From: 10.0.12.74 > Page Width: 210 (mm) > Page Length: 297 (mm) > Resolution: 98 (lpi) > Status: %%[ Error: typecheck; OffendingCommand: search ]%% > AFPL Ghostscript 6.50: Unrecoverable error, exit code 1 > /bin/cat: write error: Broken pipe > > Dialogs: 0 (exchanges with remote device) > Dials: 0 (consecutive failed calls to destination) > Calls: 0 (total phone calls placed) > Pages: 0 (pages transmitted) > TotPages: 0 (total pages to transmit) > Attempts: 0 (attempts to send current page) > Dirnum: 0 (directory of next page to send) > > ---- Documents submitted for transmission ---- > > The following documents were submitted for transmission and are > available on the server for reuse until they are automatically > purged when this job is removed. Documents may also be manually > removed using the faxrm command; consult faxrm(1) for information. > > Filename Size Type > docq/doc20.cover 0 PostScript cover page > docq/doc31.ps.20 0 PostScript > > > > > ____________________ HylaFAX(tm) Users Mailing List _______________________ > To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null > ____________________ HylaFAX(tm) Users Mailing List _______________________ To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null