Re: [hylafax-users] faxcover.ps working for sendfax but not Cypheus

[alan <alan@pair.com>]

I think the faxcover.ps as it is, isn't really a proper .ps document.
I think you need to run the executable "faxcover" on it to fill in
some blanks, etc. to create a full postscript page which could be sent
directly to a printer, for example.  

I know nothing about Cypheus, so if it's doing this, then I'm sorry I
don't have anything else to suggest.

Alan

On Fri, 11 May 2001, Curtis Rempel wrote:

> So now I have comments working on the custom cover page and the cover page
> itself works great using sendfax.
> 
> However, if I use the Cypheus client, I get "%%[ Error: typecheck;
> OffendingCommand: search ]%%" 
> 
> For whatever reason, faxcover.ps in /usr/local/lib/fax works great for
> sendfax, but when I ftp it (binary or ascii) to my PC and have Cypheus use
> it as the cover page, I get this error:
> 
> Your facsimile job to 9,7504505 was not sent because document conversion
> to facsimile failed.  The output from the converter program was:
> 
> %%[ Error: typecheck; OffendingCommand: search ]%%
> AFPL Ghostscript 6.50: Unrecoverable error, exit code 1
> /bin/cat: write error: Broken pipe
> 
> 
> Check any PostScript documents for non-standard fonts and invalid
> constructs.
> 
>     ---- Unsent job status ----
> 
>    Destination: 9,7504505
>          JobID: 20
>        GroupID: 20
>         Sender: curtis
>       Mailaddr: curtis.rempel@corp.shaw.ca
> Submitted From: 10.0.12.74
>     Page Width: 210 (mm)
>    Page Length: 297 (mm)
>     Resolution: 98 (lpi)
>         Status: %%[ Error: typecheck; OffendingCommand: search ]%%
> AFPL Ghostscript 6.50: Unrecoverable error, exit code 1
> /bin/cat: write error: Broken pipe
> 
>        Dialogs: 0 (exchanges with remote device)
>          Dials: 0 (consecutive failed calls to destination)
>          Calls: 0 (total phone calls placed)
>          Pages: 0 (pages transmitted)
>       TotPages: 0 (total pages to transmit)
>       Attempts: 0 (attempts to send current page)
>         Dirnum: 0 (directory of next page to send)
> 
>     ---- Documents submitted for transmission ----
> 
> The following documents were submitted for transmission and are
> available on the server for reuse until they are automatically
> purged when this job is removed.  Documents may also be manually
> removed using the faxrm command; consult faxrm(1) for information.
> 
> Filename                 Size Type
> docq/doc20.cover            0 PostScript cover page
> docq/doc31.ps.20            0 PostScript
> 
> 
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
> 



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null