HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] question




the faxes are sent all 100 at the same time when you compare the first
email response to the last it is 12 hours.  I even had to increase the time
out
to give it time to send.  and yes it dose take a long time to initialize
between
sending of  each fax in qu.  the faxes are one page with cover

thanks
Dan


> To answer the question about redirection...
> '/usr/sbin/xferfaxstats > somefilename'
>
> But, reviewing this information, it's saying that it sends 905 pages in
> 8:08:00 at 1.9 pages/min with minimal errors.  Which means that 100
> one-page faxes should go through in about an hour... however my experience
> says that between the dialing and fax processing, a one-page fax won't
> usually go any faster than one-per-minute... so normally I would expect
100
> one-page faxes to complete error-free in a little less than two hours.
>
> So... either your fax isn't one page (12 pages, by my math, to make 12
> hours), xferfaxstats is lying, you're misinterpreting the time somehow, or
> there's a hefty amount of time spent in initializing and prepping the fax.
>
> Lee.
>
> At 02:43 PM 4/20/01 -0500, Dan wrote:
> >
> >sender                 pages        time            pg/min   errs
> >typrate       typdata
> >*********                905            8:08:00          1.9       6
> >14400         2-d mr
> >*********                2                  0:24              5.0
0
> >14400         2-d mr
>
>---------------------------------------------------------------------------
-
> >------------------------------
> >                             907               8:08:24         1.9
6
> >
> >
> >
> >I changed the senders name which was there email address
> >I didn't know how to run xferfaxstats to print to a file so I just coped
the
> >info
> >
> >thanks
> >Dan
> >
> >
> >> At 11:49 AM 4/20/01 -0500, Dan wrote:
> >> >I am using hylafax on an old pc 133mh ,with a old hays compatible
modem
> >in
> >> >class 1 on redhat 6.1
> >> >
> >> >hylafax version 4.1beta2
> >> >
> >> >it presently is running good but it takes about 12 hours to send 100
> >faxes
> >> >I would like to speed this up,
> >> >but I do not know if it's the modem , computer speed or the way I have
> >> >hylafax setup.
> >>
> >> What does 'xferfaxstats' say?
> >>
> >> Lee.
> >>
> >>
> >
> >
> >
> >____________________ HylaFAX(tm) Users Mailing List
_______________________
> > To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null
> >
>
>
>
> ____________________ HylaFAX(tm) Users Mailing List
_______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null
>
>



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions