Re: [hylafax-users] Same problem

["Chris Jones" <c.jones@icm-group.com>]

Hi

> No.  Just send the log in the body of the mail - no attachment.

Ok, here it is. Apologies for the size!

FaxGetty[4150]: OPEN /dev/ttyS0
FaxGetty[4150]: MODEM set DTR OFF
FaxGetty[4150]: DELAY 2600 ms
FaxGetty[4150]: MODEM set DTR ON
FaxGetty[4150]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output
flow RTS/CTS
FaxGetty[4150]: MODEM flush i/o
FaxGetty[4150]: <-- [4:ATZ\r]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: <-- [17:ATE0V1Q0X4S0=0H0\r]
FaxGetty[4150]: --> [16:ATE0V1Q0X4S0=0H0]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1\r]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: <-- [12:AT+FCLASS=?\r]
FaxGetty[4150]: --> [7:0,1,2.0]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: MODEM Supports "Data"
FaxGetty[4150]: MODEM Supports "Class 1"
FaxGetty[4150]: MODEM Supports "Class 2.0"
FaxGetty[4150]: <-- [14:AT+FCLASS=2.0\r]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: <-- [8:AT+FMI?\r]
FaxGetty[4150]: --> [31:USRobotics Sportster V.34+ FAX ]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: MODEM: Mfr USRobotics Sportster V.34+ FAX
FaxGetty[4150]: <-- [8:AT+FMM?\r]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: <-- [8:AT+FMR?\r]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: <-- [9:AT+FCC=?\r]
FaxGetty[4150]: --> [35:(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7)]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: MODEM Supports 3.85 line/mm
FaxGetty[4150]: MODEM Supports 7.7 line/mm
FaxGetty[4150]: MODEM Supports 2400 bit/s
FaxGetty[4150]: MODEM Supports 4800 bit/s
FaxGetty[4150]: MODEM Supports 7200 bit/s
FaxGetty[4150]: MODEM Supports 9600 bit/s
FaxGetty[4150]: MODEM Supports 12000 bit/s
FaxGetty[4150]: MODEM Supports 14400 bit/s
FaxGetty[4150]: MODEM Supports page width 1728 pixels in 215 mm
FaxGetty[4150]: MODEM Supports page width 2048 pixels in 255 mm
FaxGetty[4150]: MODEM Supports page width 2432 pixels in 303 mm
FaxGetty[4150]: MODEM Supports A4 page length (297 mm)
FaxGetty[4150]: MODEM Supports B4 page length (364 mm)
FaxGetty[4150]: MODEM Supports unlimited page length
FaxGetty[4150]: MODEM Supports 1-D MR
FaxGetty[4150]: MODEM Supports 0 ms/scanline
FaxGetty[4150]: MODEM Supports 5 ms/scanline
FaxGetty[4150]: MODEM Supports 10 ms, 5 ms/scanline
FaxGetty[4150]: MODEM Supports 10 ms/scanline
FaxGetty[4150]: MODEM Supports 20 ms, 10 ms/scanline
FaxGetty[4150]: MODEM Supports 20 ms/scanline
FaxGetty[4150]: MODEM Supports 40 ms, 20 ms/scanline
FaxGetty[4150]: MODEM Supports 40 ms/scanline
FaxGetty[4150]: MODEM Supports no copy quality checking
FaxGetty[4150]: <-- [9:AT+FAP=?\r]
FaxGetty[4150]: --> [5:ERROR]
FaxGetty[4150]: <-- [9:AT+FSP=?\r]
FaxGetty[4150]: --> [5:(0,1)]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: <-- [14:AT+FCLASS=2.0\r]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: <-- [9:AT+FLO=2\r]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: <-- [9:AT+FPP=0\r]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: <-- [9:AT+FBO=0\r]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: <-- [10:AT+FCT=30\r]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: <-- [15:AT+FNR=1,1,1,0\r]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: <-- [9:AT+FIE=0\r]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: <-- [9:AT+FBU=0\r]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: MODEM USROBOTICS SPORTSTER V.34+ FAX /
FaxGetty[4150]: <-- [5:ATM0\r]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: <-- [9:AT+FCR=1\r]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: <-- [23:AT+FLI="USR Sportster"\r]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: <-- [9:AT+FAA=1\r]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: STATE CHANGE: BASE -> RUNNING
FaxGetty[4150]: MODEM input buffering disabled
HylaFAX[4165]: Filesystem has SysV-style file creation semantics.
FaxQueuer[4014]: SUBMIT JOB 1
FaxQueuer[4014]: JOB 1 (suspended dest  pri 127 tts 0:00 killtime 2:59:00):
CREATE
FaxQueuer[4014]: JOB 1 (ready dest +44xxxxxx pri 127 tts 0:00 killtime
2:59:00): READY
FaxQueuer[4014]: JOB 1 (ready dest +44xxxxxx pri 127 tts 0:00 killtime
2:59:00): PROCESS
FaxQueuer[4014]: JOB 1 (active dest +44xxxxxx pri 127 tts 0:00 killtime
2:59:00): ACTIVE
FaxQueuer[4014]: JOB 1 (active dest +44xxxxxx pri 127 tts 0:00 killtime
2:59:00): PREPARE START
FaxQueuer[4166]: JOB 1 (active dest +44xxxxxx pri 127 tts 0:00 killtime
2:59:00): CONVERT DOCUMENT: bin/ps2fax -o docq/doc8.ps;01 -r 196 -w 1728 -l
297 -m 4294967295 -1 docq/doc8.ps.1
FaxQueuer[4014]: JOB 1 (active dest +44xxxxxx pri 127 tts 0:00 killtime
2:59:00): PREPARE DONE
FaxQueuer[4014]: JOB 1 (active dest +44xxxxxx pri 127 tts 0:00 killtime
2:59:00): CMD START /usr/sbin/faxsend -m ttyS0 sendq/q1 (PID 4170)
FaxSend[4170]: MODEM set DTR OFF
FaxSend[4170]: DELAY 2600 ms
FaxSend[4170]: MODEM set DTR ON
FaxSend[4170]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output
flow RTS/CTS
FaxSend[4170]: MODEM flush i/o
FaxSend[4170]: <-- [4:ATZ\r]
FaxGetty[4150]: ANSWER: Can not lock modem device
FaxGetty[4150]: STATE CHANGE: RUNNING -> LOCKWAIT (timeout 30)
FaxSend[4170]: --> [2:OK]
FaxSend[4170]: <-- [17:ATE0V1Q0X4S0=0H0\r]
FaxSend[4170]: --> [16:ATE0V1Q0X4S0=0H0]
FaxSend[4170]: --> [2:OK]
FaxSend[4170]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1\r]
FaxSend[4170]: --> [2:OK]
FaxSend[4170]: <-- [12:AT+FCLASS=?\r]
FaxSend[4170]: --> [7:0,1,2.0]
FaxSend[4170]: --> [2:OK]
FaxSend[4170]: MODEM Supports "Data"
FaxSend[4170]: MODEM Supports "Class 1"
FaxSend[4170]: MODEM Supports "Class 2.0"
FaxSend[4170]: <-- [14:AT+FCLASS=2.0\r]
FaxSend[4170]: --> [2:OK]
FaxSend[4170]: <-- [8:AT+FMI?\r]
FaxSend[4170]: --> [31:USRobotics Sportster V.34+ FAX ]
FaxSend[4170]: --> [2:OK]
FaxSend[4170]: MODEM: Mfr USRobotics Sportster V.34+ FAX
FaxSend[4170]: <-- [8:AT+FMM?\r]
FaxSend[4170]: --> [2:OK]
FaxSend[4170]: <-- [8:AT+FMR?\r]
FaxSend[4170]: --> [2:OK]
FaxSend[4170]: <-- [9:AT+FCC=?\r]
FaxSend[4170]: --> [35:(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7)]
FaxSend[4170]: --> [2:OK]
FaxSend[4170]: MODEM Supports 3.85 line/mm
FaxSend[4170]: MODEM Supports 7.7 line/mm
FaxSend[4170]: MODEM Supports 2400 bit/s
FaxSend[4170]: MODEM Supports 4800 bit/s
FaxSend[4170]: MODEM Supports 7200 bit/s
FaxSend[4170]: MODEM Supports 9600 bit/s
FaxSend[4170]: MODEM Supports 12000 bit/s
FaxSend[4170]: MODEM Supports 14400 bit/s
FaxSend[4170]: MODEM Supports page width 1728 pixels in 215 mm
FaxSend[4170]: MODEM Supports page width 2048 pixels in 255 mm
FaxSend[4170]: MODEM Supports page width 2432 pixels in 303 mm
FaxSend[4170]: MODEM Supports A4 page length (297 mm)
FaxSend[4170]: MODEM Supports B4 page length (364 mm)
FaxSend[4170]: MODEM Supports unlimited page length
FaxSend[4170]: MODEM Supports 1-D MR
FaxSend[4170]: MODEM Supports 0 ms/scanline
FaxSend[4170]: MODEM Supports 5 ms/scanline
FaxSend[4170]: MODEM Supports 10 ms, 5 ms/scanline
FaxSend[4170]: MODEM Supports 10 ms/scanline
FaxSend[4170]: MODEM Supports 20 ms, 10 ms/scanline
FaxSend[4170]: MODEM Supports 20 ms/scanline
FaxSend[4170]: MODEM Supports 40 ms, 20 ms/scanline
FaxSend[4170]: MODEM Supports 40 ms/scanline
FaxSend[4170]: MODEM Supports no copy quality checking
FaxSend[4170]: <-- [9:AT+FAP=?\r]
FaxSend[4170]: --> [5:ERROR]
FaxSend[4170]: <-- [9:AT+FSP=?\r]
FaxSend[4170]: --> [5:(0,1)]
FaxSend[4170]: --> [2:OK]
FaxSend[4170]: <-- [14:AT+FCLASS=2.0\r]
FaxSend[4170]: --> [2:OK]
FaxSend[4170]: <-- [9:AT+FLO=2\r]
FaxSend[4170]: --> [2:OK]
FaxSend[4170]: <-- [9:AT+FPP=0\r]
FaxSend[4170]: --> [2:OK]
FaxSend[4170]: <-- [9:AT+FBO=0\r]
FaxSend[4170]: --> [2:OK]
FaxSend[4170]: <-- [10:AT+FCT=30\r]
FaxSend[4170]: --> [2:OK]
FaxSend[4170]: <-- [15:AT+FNR=1,1,1,0\r]
FaxSend[4170]: --> [2:OK]
FaxSend[4170]: <-- [9:AT+FIE=0\r]
FaxSend[4170]: --> [2:OK]
FaxSend[4170]: <-- [9:AT+FBU=0\r]
FaxSend[4170]: --> [2:OK]
FaxSend[4170]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
FaxSend[4170]: --> [2:OK]
FaxSend[4170]: MODEM USROBOTICS SPORTSTER V.34+ FAX /
FaxSend[4170]: <-- [5:ATM0\r]
FaxSend[4170]: --> [2:OK]
FaxSend[4170]: STATE CHANGE: BASE -> RUNNING
FaxSend[4170]: MODEM input buffering disabled
FaxSend[4170]: SEND FAX: JOB 1 DEST 388334 COMMID 00000691
FaxSend[4170]: SEND FAILED: Can not setup modem
FaxQueuer[4014]: JOB 1 (active dest +44xxxxxx pri 127 tts 0:00 killtime
2:58:43): CMD DONE: exit status 0
FaxQueuer[4014]: JOB 1 (sleeping dest +44xxxxxx pri 126 tts 0:00 killtime
2:58:43): SEND INCOMPLETE: requeue for 2:00; Can not setup modem
FaxQueuer[4014]: JOB 1 (sleeping dest +44xxxxxx pri 126 tts 0:00 killtime
2:58:43): SLEEP FOR 2:00
FaxGetty[4150]: MODEM set DTR OFF
FaxGetty[4150]: DELAY 2600 ms
FaxGetty[4150]: MODEM set DTR ON
FaxGetty[4150]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output
flow RTS/CTS
FaxGetty[4150]: MODEM flush i/o
FaxGetty[4150]: <-- [4:ATZ\r]
FaxGetty[4150]: --> [3:ATZ]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: <-- [17:ATE0V1Q0X4S0=0H0\r]
FaxGetty[4150]: MODEM TIMEOUT: reading line from modem
FaxGetty[4150]: MODEM <Timeout>
FaxGetty[4150]: MODEM set DTR OFF
FaxGetty[4150]: DELAY 2600 ms
FaxGetty[4150]: MODEM set DTR ON
FaxGetty[4150]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output
flow RTS/CTS
FaxGetty[4150]: MODEM flush i/o
FaxGetty[4150]: <-- [4:ATZ\r]
FaxGetty[4150]: --> [3:ATZ]
FaxGetty[4150]: --> [2:OK]
FaxGetty[4150]: <-- [17:ATE0V1Q0X4S0=0H0\r]
FaxGetty[4150]: MODEM TIMEOUT: reading line from modem
FaxGetty[4150]: MODEM <Timeout>
FaxGetty[4150]: MODEM set DTR OFF
FaxGetty[4150]: /dev/ttyS0: Can not initialize modem.
FaxGetty[4150]: STATE CHANGE: LOCKWAIT -> MODEMWAIT (timeout 30)

at this point, nothing is able to use the modem - incoming faxes aren't
received and I get lots of mails telling me the modem is wedged.

--
Chris Jones
IT Department
ICM Group



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null