[hylafax-users] faxrcvd do not work

["Marc Wiemers" <mawi@buran.fb10.tu-berlin.de>]

Dear Hylafax Users,


the hylafax is install at SGI with Irix 6.3. The software recive the
faxes but do not print. I want to print on a samba printer. It is
possible to print by hand but not after the reciving of the fax.

I put at the end of faxrcvd:
/usr/freeware/bin/fax2ps $1 | /usr/samba/bin/smbprint 0 0 0 0 0

but it still do not print the incoming faxes. If i to per "hand" with this 
command it works.

I think it is a problem of the permissions.
here the file:

   8 -rwxr-xr-x    1 root     sys          119 M�rz 21 11:33 faxrcvd
Did anyone have an idea? Thank you very mutch.

M.Wiemers


-------------------------------------------------------------
Dipl.-Ing. Marc Wiemers
Technische Universitaet Berlin
ISS - Fachgebiet Schienenfahrzeugtechnik
-------------------------------------------------------------
Sekr. SG 14                          Tel.: ++49 30 314 21389
Salzufer 17-19                       Fax.: ++49 30 314 22529
D-10587 Berlin            mail:  mawi@buran.fb10.tu-berlin.de
-------------------------------------------------------------
Informationen �ber das Fachgebiet unter:
http://www.tu-berlin.de/fb10/ISS/FG9/home.htm
-------------------------------------------------------------


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null