HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Waiting for Modem to come ready



At 09:11 AM 3/12/01 +1000, Ken Cole wrote:

>I used the following setserial command:
>
>setserial /dev/ttyS1 port 0x5450 UART 16550A IRQ 3 baud_base
>115200
>
>The command seems to work and a setserial /dev/ttyS1 -a
>shows:
>
>/dev/ttyS1, Line 1, UART: 16550A, Port: 0x5450, IRQ: 3
>        Baud_base: 115200, close_delay: 50, divisor: 0
>        closing_wait: 3000, closing_wait2: infinte
>        Flags: spd_normal skip_test

Oh yeah, one thing to remember when using the setserial command is that you
have *got* to make sure that the setserial command is run *before* faxgetty
starts.  Put it in your rc.serial file rather than in your rc.local because
you need seterial to be run before init.

Lee.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions