 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Re: [hylafax-users] MT5600ZDX and receive errors
- To: "'hylafax-users@hylafax.org'" <hylafax-users@hylafax.org>
- Subject: Re: [hylafax-users] MT5600ZDX and receive errors
- From: "Abrahamsen, Kenneth" <Kenneth_Abrahamsen@mcgraw-hill.com>
- Date: Tue, 6 Mar 2001 13:57:38 -0500
Oh, sorry - I forgot the log output.. Noticed the system was receiving multiple faxes at the same time the error happened. Related to problem? >>>>Is it odd that a single 2 page fax receipt generates 3 '.tif' files (312.tif, 314.tif and 315.tif)??? <<<< Mar 6 09:31:21 twgrh1 FaxGetty[647]: RECV FAX (00002279): recvq/fax00312.tif from 8584968074, route to <unspecified>, 2 pages in 0:46 Mar 6 09:32:23 twgrh1 FaxGetty[647]: RECV FAX (00002279): recvq/fax00314.tif from 8584968074, route to <unspecified>, 2 pages in 1:02 Mar 6 09:33:10 twgrh1 FaxGetty[647]: RECV FAX (00002279): recvq/fax00315.tif from 8584968074, route to <unspecified>, 0 pages in 0:47 .... Mar 6 09:30:35 twgrh1 FaxGetty[647]: ANSWER: FAX CONNECTION Mar 6 09:30:36 twgrh1 inetd[419]: /usr/sbin/nmbd: exit status 0x1 Mar 6 09:30:39 twgrh1 last message repeated 3 times Mar 6 09:30:41 twgrh1 FaxGetty[646]: ANSWER: FAX CONNECTION Mar 6 09:30:41 twgrh1 inetd[419]: /usr/sbin/nmbd: exit status 0x1 Mar 6 09:30:59 twgrh1 last message repeated 17 times Mar 6 09:31:00 twgrh1 inetd[419]: netbios-ns/udp server failing (looping), service terminated Mar 6 09:31:02 twgrh1 FaxGetty[647]: RECV FAX (00002279): from 8584968074, page 1 in 0:25, INF, 3.85 line/mm, 1-D MR Mar 6 09:31:12 twgrh1 FaxGetty[646]: RECV FAX (00002278): from 909 874 6725, page 1 in 0:29, INF, 3.85 line/mm, 2-D MR Mar 6 09:31:12 twgrh1 FaxGetty[646]: RECV FAX (00002278): recvq/fax00313.tif from 909 874 6725, route to <unspecified>, 1 pages in 0:31 Mar 6 09:31:15 twgrh1 FaxGetty[646]: RECV FAX: bin/faxrcvd "recvq/fax00313.tif" "ttyS0" "00002278" "" Mar 6 09:31:21 twgrh1 FaxGetty[647]: RECV FAX (00002279): from 8584968074, page 2 in 0:19, INF, 3.85 line/mm, 1-D MR Mar 6 09:31:21 twgrh1 FaxGetty[647]: RECV FAX (00002279): recvq/fax00312.tif from 8584968074, route to <unspecified>, 2 pages in 0:46 Mar 6 09:31:25 twgrh1 FaxGetty[646]: MODEM ROCKWELL RC32ACL/V1.400-03-CS29 Mar 6 09:31:59 twgrh1 FaxGetty[647]: RECV FAX (00002279): from 8584968074, page 1 in 0:38, INF, 3.85 line/mm, 1-D MR Mar 6 09:32:23 twgrh1 FaxGetty[647]: RECV FAX (00002279): from 8584968074, page 2 in 0:24, INF, 3.85 line/mm, 1-D MR Mar 6 09:32:23 twgrh1 FaxGetty[647]: RECV FAX (00002279): recvq/fax00314.tif from 8584968074, route to <unspecified>, 2 pages in 1:02 Mar 6 09:33:10 twgrh1 FaxGetty[647]: RECV FAX (00002279): recvq/fax00315.tif from 8584968074, route to <unspecified>, 0 pages in 0:47 Mar 6 09:33:10 twgrh1 FaxGetty[647]: RECV FAX: bin/faxrcvd "recvq/fax00312.tif" "ttyS1" "00002279" "" Mar 6 09:33:12 twgrh1 FaxGetty[647]: RECV FAX: bin/faxrcvd "recvq/fax00314.tif" "ttyS1" "00002279" "" Mar 6 09:33:16 twgrh1 FaxGetty[647]: RECV FAX (00002279): session with 8584968074 terminated abnormally: COMREC invalid response received Mar 6 09:33:16 twgrh1 FaxGetty[647]: RECV FAX: bin/faxrcvd "recvq/fax00315.tif" "ttyS1" "00002279" "COMREC invalid response received" Mar 6 09:33:23 twgrh1 FaxGetty[647]: MODEM ROCKWELL MultiModemZDX/V2.300-V90_2M_DLS > -----Original Message----- > From: Abrahamsen, Kenneth > Sent: Tuesday, March 06, 2001 10:22 AM > To: 'hylafax-users@hylafax.org' > Subject: RE: MT5600ZDX and receive errors > > RH 6.1 and > 220 twgrh1 server (HylaFAX (tm) Version 4.1beta1) ready. > > After increasing the > #SessionTracing: 11 > SessionTracing: 0xFFF > > I have received this error. Can these type of errors be reduced / > eli,inated by config changes? > Thanks! > ken > > An attempt to receive facsimile on ttyS1 failed because: > > COMREC invalid response received > > ---- Transcript of session follows ---- > > Mar 06 09:30:26.95: [ 647]: SESSION BEGIN 00002279 14254254867868 > Mar 06 09:30:26.95: [ 647]: <-- [4:ATA\r] > Mar 06 09:30:35.64: [ 647]: --> [5:+FCON] > Mar 06 09:30:35.65: [ 647]: ANSWER: FAX CONNECTION > Mar 06 09:30:35.65: [ 647]: STATE CHANGE: ANSWERING -> RECEIVING > Mar 06 09:30:35.65: [ 647]: MODEM input buffering enabled > Mar 06 09:30:35.65: [ 647]: RECV FAX: begin > Mar 06 09:30:37.29: [ 647]: --> [29:+FTSI: " 8584968074"] > Mar 06 09:30:37.30: [ 647]: REMOTE TSI "8584968074" > Mar 06 09:30:37.59: [ 647]: --> [22:+FDCS: 0,5,0,2,0,0,0,0] > Mar 06 09:30:37.60: [ 647]: REMOTE wants 14400 bit/s > Mar 06 09:30:37.60: [ 647]: REMOTE wants page width 1728 pixels in 215 mm > Mar 06 09:30:37.60: [ 647]: REMOTE wants unlimited page length > Mar 06 09:30:37.60: [ 647]: REMOTE wants 3.85 line/mm > Mar 06 09:30:37.60: [ 647]: REMOTE wants 1-D MR > Mar 06 09:30:37.70: [ 647]: --> [2:OK] > Mar 06 09:30:37.71: [ 647]: <-- [7:AT+FDR\r] > Mar 06 09:30:40.70: [ 647]: --> [5:+FCFR] > Mar 06 09:30:42.86: [ 647]: --> [22:+FDCS: 0,5,0,2,0,0,0,0] > Mar 06 09:30:42.87: [ 647]: REMOTE wants 14400 bit/s > Mar 06 09:30:42.87: [ 647]: REMOTE wants page width 1728 pixels in 215 mm > Mar 06 09:30:42.87: [ 647]: REMOTE wants unlimited page length > Mar 06 09:30:42.87: [ 647]: REMOTE wants 3.85 line/mm > Mar 06 09:30:42.87: [ 647]: REMOTE wants 1-D MR > Mar 06 09:30:42.87: [ 647]: --> [7:CONNECT] > Mar 06 09:30:42.87: [ 647]: RECV: begin page > Mar 06 09:30:42.87: [ 647]: RECV: send trigger 022 > Mar 06 09:31:00.60: [ 647]: RECV/CQ: Bad 1D pixel count, row 1090, got 0, > expected 1728 > Mar 06 09:31:00.60: [ 647]: RECV/CQ: Bad 1D pixel count, row 1091, got 0, > expected 1728 > Mar 06 09:31:00.60: [ 647]: RECV/CQ: Bad 1D pixel count, row 1092, got 0, > expected 1728 > Mar 06 09:31:00.60: [ 647]: RECV/CQ: Bad 1D pixel count, row 1093, got 0, > expected 1728 > Mar 06 09:31:00.60: [ 647]: RECV/CQ: Bad 1D pixel count, row 1094, got 0, > expected 1728 > Mar 06 09:31:00.60: [ 647]: RECV/CQ: Adjusting for trailing noise (5 run) > Mar 06 09:31:00.60: [ 647]: RECV: 1090 total lines, 0 bad lines, 0 > consecutive bad lines > Mar 06 09:31:00.60: [ 647]: --> [17:+FPTS: 1,2219,0,0] > Mar 06 09:31:02.02: [ 647]: --> [7:+FET: 0] > Mar 06 09:31:02.02: [ 647]: RECV recv MPS (more pages, same document) > Mar 06 09:31:02.13: [ 647]: --> [2:OK] > Mar 06 09:31:02.13: [ 647]: RECV send MCF (message confirmation) > Mar 06 09:31:02.13: [ 647]: RECV FAX (00002279): from 8584968074, page 1 > in 0:25, INF, 3.85 line/mm, 1-D MR > Mar 06 09:31:02.13: [ 647]: <-- [7:AT+FDR\r] > Mar 06 09:31:04.20: [ 647]: --> [7:CONNECT] > Mar 06 09:31:04.20: [ 647]: RECV: begin page > Mar 06 09:31:04.20: [ 647]: RECV: send trigger 022 > Mar 06 09:31:20.01: [ 647]: RECV/CQ: Bad 1D pixel count, row 1087, got 0, > expected 1728 > Mar 06 09:31:20.01: [ 647]: RECV/CQ: Bad 1D pixel count, row 1088, got 0, > expected 1728 > Mar 06 09:31:20.01: [ 647]: RECV/CQ: Bad 1D pixel count, row 1089, got 0, > expected 1728 > Mar 06 09:31:20.01: [ 647]: RECV/CQ: Bad 1D pixel count, row 1090, got 0, > expected 1728 > Mar 06 09:31:20.01: [ 647]: RECV/CQ: Bad 1D pixel count, row 1091, got 0, > expected 1728 > Mar 06 09:31:20.01: [ 647]: RECV/CQ: Adjusting for trailing noise (5 run) > Mar 06 09:31:20.01: [ 647]: RECV: 1087 total lines, 0 bad lines, 0 > consecutive bad lines > Mar 06 09:31:20.01: [ 647]: --> [17:+FPTS: 1,2219,0,0] > Mar 06 09:31:21.55: [ 647]: --> [7:+FET: 1] > Mar 06 09:31:21.55: [ 647]: RECV recv EOM (more documents) > Mar 06 09:31:21.66: [ 647]: --> [2:OK] > Mar 06 09:31:21.66: [ 647]: RECV send MCF (message confirmation) > Mar 06 09:31:21.66: [ 647]: RECV FAX (00002279): from 8584968074, page 2 > in 0:19, INF, 3.85 line/mm, 1-D MR > Mar 06 09:31:21.66: [ 647]: RECV FAX (00002279): recvq/fax00312.tif from > 8584968074, route to <unspecified>, 2 pages in 0:46 > Mar 06 09:31:21.66: [ 647]: <-- [7:AT+FDR\r] > Mar 06 09:31:33.36: [ 647]: --> [29:+FTSI: " 8584968074"] > Mar 06 09:31:33.36: [ 647]: REMOTE TSI "8584968074" > Mar 06 09:31:38.94: [ 647]: --> [22:+FDCS: 0,5,0,2,0,0,0,0] > Mar 06 09:31:38.94: [ 647]: REMOTE wants 14400 bit/s > Mar 06 09:31:38.94: [ 647]: REMOTE wants page width 1728 pixels in 215 mm > Mar 06 09:31:38.94: [ 647]: REMOTE wants unlimited page length > Mar 06 09:31:38.94: [ 647]: REMOTE wants 3.85 line/mm > Mar 06 09:31:38.94: [ 647]: REMOTE wants 1-D MR > Mar 06 09:31:38.94: [ 647]: --> [7:CONNECT] > Mar 06 09:31:38.94: [ 647]: RECV: begin page > Mar 06 09:31:38.94: [ 647]: RECV: send trigger 022 > Mar 06 09:31:58.26: [ 647]: RECV/CQ: Bad 1D pixel count, row 1089, got 0, > expected 1728 > Mar 06 09:31:58.26: [ 647]: RECV/CQ: Bad 1D pixel count, row 1090, got 0, > expected 1728 > Mar 06 09:31:58.26: [ 647]: RECV/CQ: Bad 1D pixel count, row 1091, got 0, > expected 1728 > Mar 06 09:31:58.26: [ 647]: RECV/CQ: Bad 1D pixel count, row 1092, got 0, > expected 1728 > Mar 06 09:31:58.26: [ 647]: RECV/CQ: Bad 1D pixel count, row 1093, got 0, > expected 1728 > Mar 06 09:31:58.26: [ 647]: RECV/CQ: Adjusting for trailing noise (5 run) > Mar 06 09:31:58.26: [ 647]: RECV: 1089 total lines, 0 bad lines, 0 > consecutive bad lines > Mar 06 09:31:58.26: [ 647]: --> [17:+FPTS: 1,2219,0,0] > Mar 06 09:31:59.68: [ 647]: --> [7:+FET: 0] > Mar 06 09:31:59.68: [ 647]: RECV recv MPS (more pages, same document) > Mar 06 09:31:59.79: [ 647]: --> [2:OK] > Mar 06 09:31:59.79: [ 647]: RECV send MCF (message confirmation) > Mar 06 09:31:59.79: [ 647]: RECV FAX (00002279): from 8584968074, page 1 > in 0:38, INF, 3.85 line/mm, 1-D MR > Mar 06 09:31:59.79: [ 647]: <-- [7:AT+FDR\r] > Mar 06 09:32:01.84: [ 647]: --> [7:CONNECT] > Mar 06 09:32:01.84: [ 647]: RECV: begin page > Mar 06 09:32:01.84: [ 647]: RECV: send trigger 022 > Mar 06 09:32:21.33: [ 647]: RECV/CQ: Bad 1D pixel count, row 1085, got 0, > expected 1728 > Mar 06 09:32:21.33: [ 647]: RECV/CQ: Bad 1D pixel count, row 1086, got 0, > expected 1728 > Mar 06 09:32:21.33: [ 647]: RECV/CQ: Bad 1D pixel count, row 1087, got 0, > expected 1728 > Mar 06 09:32:21.33: [ 647]: RECV/CQ: Bad 1D pixel count, row 1088, got 0, > expected 1728 > Mar 06 09:32:21.33: [ 647]: RECV/CQ: Bad 1D pixel count, row 1089, got 0, > expected 1728 > Mar 06 09:32:21.33: [ 647]: RECV/CQ: Adjusting for trailing noise (5 run) > Mar 06 09:32:21.33: [ 647]: RECV: 1085 total lines, 0 bad lines, 0 > consecutive bad lines > Mar 06 09:32:21.44: [ 647]: --> [17:+FPTS: 1,2219,0,0] > Mar 06 09:32:22.97: [ 647]: --> [7:+FET: 1] > Mar 06 09:32:22.97: [ 647]: RECV recv EOM (more documents) > Mar 06 09:32:23.08: [ 647]: --> [2:OK] > Mar 06 09:32:23.08: [ 647]: RECV send MCF (message confirmation) > Mar 06 09:32:23.08: [ 647]: RECV FAX (00002279): from 8584968074, page 2 > in 0:24, INF, 3.85 line/mm, 1-D MR > Mar 06 09:32:23.08: [ 647]: RECV FAX (00002279): recvq/fax00314.tif from > 8584968074, route to <unspecified>, 2 pages in 1:02 > Mar 06 09:32:23.08: [ 647]: <-- [7:AT+FDR\r] > Mar 06 09:32:34.79: [ 647]: --> [29:+FTSI: " 8584968074"] > Mar 06 09:32:34.79: [ 647]: REMOTE TSI "8584968074" > Mar 06 09:32:40.36: [ 647]: --> [22:+FDCS: 0,5,0,2,0,0,0,0] > Mar 06 09:32:40.36: [ 647]: REMOTE wants 14400 bit/s > Mar 06 09:32:40.36: [ 647]: REMOTE wants page width 1728 pixels in 215 mm > Mar 06 09:32:40.36: [ 647]: REMOTE wants unlimited page length > Mar 06 09:32:40.36: [ 647]: REMOTE wants 3.85 line/mm > Mar 06 09:32:40.36: [ 647]: REMOTE wants 1-D MR > Mar 06 09:32:40.36: [ 647]: --> [7:CONNECT] > Mar 06 09:32:40.36: [ 647]: RECV: begin page > Mar 06 09:32:40.36: [ 647]: RECV: send trigger 022 > Mar 06 09:32:50.32: [ 647]: RECV/CQ: Bad 1D pixel count, row 507, got > 1788, expected 1728 > Mar 06 09:32:50.32: [ 647]: RECV/CQ: Adjusting for trailing noise (1 run) > Mar 06 09:32:50.32: [ 647]: RECV: 507 total lines, 0 bad lines, 0 > consecutive bad lines > Mar 06 09:32:50.32: [ 647]: --> [17:+FPTS: 1,2219,0,0] > Mar 06 09:33:08.68: [ 647]: --> [10:+FHNG: 102] > Mar 06 09:33:08.68: [ 647]: REMOTE HANGUP: COMREC invalid response > received (code 102) > Mar 06 09:33:10.11: [ 647]: --> [2:OK] > Mar 06 09:33:10.11: [ 647]: RECV FAX (00002279): recvq/fax00315.tif from > 8584968074, route to <unspecified>, 0 pages in 0:47 > Mar 06 09:33:10.11: [ 647]: RECV FAX: COMREC invalid response received > Mar 06 09:33:10.11: [ 647]: RECV FAX: bin/faxrcvd "recvq/fax00312.tif" > "ttyS1" "00002279" "" > Mar 06 09:33:12.82: [ 647]: RECV FAX: bin/faxrcvd "recvq/fax00314.tif" > "ttyS1" "00002279" "" > Mar 06 09:33:16.51: [ 647]: RECV FAX (00002279): session with 8584968074 > terminated abnormally: COMREC invalid response received > Mar 06 09:33:16.51: [ 647]: RECV FAX: bin/faxrcvd "recvq/fax00315.tif" > "ttyS1" "00002279" "COMREC invalid response received" > > -----Original Message----- > From: Abrahamsen, Kenneth > Sent: Monday, March 05, 2001 10:02 AM > To: hylafax-users@hylafax.org > Subject: MT5600ZDX and receive errors > > I've put a MT5600ZDX into production a few days ago and have been > getting these type of errors. Many faxes are received properly but some > like this have a problem. Have I made errors in the config file or left > something out? > Thanks. > ken > > Config file..... > > # $Id: mt-5600zdx 2001/02/21 12:00:00 root Exp $ > # > # HylaFAX Facsimile Software > # > # Copyright (c) 1990-1996 Sam Leffler > # Copyright (c) 1991-1996 Silicon Graphics, Inc. > # HylaFAX is a trademark of Silicon Graphics, Inc. > # > # Permission to use, copy, modify, distribute, and sell this > software and > # its documentation for any purpose is hereby granted without fee, > provided > # that (i) the above copyright notices and this permission notice > appear in > # all copies of the software and related documentation, and (ii) the > names of > # Sam Leffler and Silicon Graphics may not be used in any > advertising or > # publicity relating to the software without the specific, prior > written > # permission of Sam Leffler and Silicon Graphics. > # > # THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, > # EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY > # WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. > # > # IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR > # ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY > KIND, > # OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR > PROFITS, > # WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY > THEORY OF > # LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR > PERFORMANCE > # OF THIS SOFTWARE. > # > # > # Configuration for a Multitech 5600ZDX Class 2 modem. > # > # This configuration file sets up the modem to run at 38.4 for > # sending and for receiving. RTS/CTS is used for flow control > # which also works for data connections. Adaptive answer support > # is reliable, but to use it you must also enable > ModemWaitForConnect > # to force the server to skip intermediate status messages and > # wait for the "CONNECT" message. > # > # CONFIG: CLASS2: MULTITECH 5600ZDX > # > # BEGIN-SERVER > # END-SERVER > CountryCode: 1 > AreaCode: 425 > FAXNumber: 425-486-7868 > LongDistancePrefix: 1 > InternationalPrefix: 011 > DialStringRules: etc/dialrules > ServerTracing: 1 > SessionTracing: 11 > RecvFileMode: 0644 > LogFileMode: 0644 > DeviceMode: 0600 > RingsBeforeAnswer: 1 > SpeakerVolume: off > GettyArgs: "-h %l dx_%s" > LocalIdentifier: "425-486-7868 (WRIGHT GROUP)" > TagLineFont: etc/lutRS18.pcf > TagLineFormat: "From %%l|%c - Job %i|Page %%p of %%t" > MaxRecvPages: 9999 > # > # Modem-related stuff: should reflect modem command interface > # and hardware connection/cabling (e.g. flow control). > # > ModemType: Class2 # use class 2 interface > ModemRate: 38400 # lock rate for DCE-DTE > # communication > ModemFlowControl: rtscts # default > # > ModemHardFlowCmd: AT&E4 # hardware flow control > ModemSoftFlowCmd: AT&E5 # software flow control > ModemSetupDTRCmd: AT&D3 # setup so DTR drop resets > # modem > ModemSetupDCDCmd: AT&C1 # setup so DCD reflects > carrier > # (or not) > ModemSetupAACmd: AT+FAA=1 # enable adaptive-answer in > # class 2 > # > # NB: some models get confused by the @ > # > ModemDialCmd: ATDT%s # T for tone dialing, @ for > # silence > # > ModemSendFillOrder: LSB2MSB # as expected > ModemRecvFillOrder: MSB2LSB # opposite of what makes > sense > Class2RecvDataTrigger: "\022" # character sent to modem to > # start recv > > > =================================================================== > ERROR Message.... > An attempt to receive facsimile on ttyS1 failed because: > > Normal and proper end of connection > > ---- Transcript of session follows ---- > > Mar 05 09:51:40.45: [ 647]: SESSION BEGIN 00002223 14254254867868 > Mar 05 09:51:40.45: [ 647]: <-- [4:ATA\r] > Mar 05 09:51:49.03: [ 647]: --> [5:+FCON] > Mar 05 09:51:49.03: [ 647]: ANSWER: FAX CONNECTION > Mar 05 09:51:49.03: [ 647]: RECV FAX: begin > Mar 05 09:51:50.65: [ 647]: --> [29:+FTSI: " FIOT4.24 "] > Mar 05 09:51:50.65: [ 647]: REMOTE TSI "FIOT4.24" > Mar 05 09:51:51.05: [ 647]: --> [22:+FDCS: 0,5,0,2,0,0,0,0] > Mar 05 09:51:51.05: [ 647]: REMOTE wants 14400 bit/s > Mar 05 09:51:51.05: [ 647]: REMOTE wants page width 1728 pixels in > 215 mm > Mar 05 09:51:51.05: [ 647]: REMOTE wants unlimited page length > Mar 05 09:51:51.05: [ 647]: REMOTE wants 3.85 line/mm > Mar 05 09:51:51.05: [ 647]: REMOTE wants 1-D MR > Mar 05 09:51:51.05: [ 647]: --> [2:OK] > Mar 05 09:51:51.05: [ 647]: <-- [7:AT+FDR\r] > Mar 05 09:51:54.04: [ 647]: --> [5:+FCFR] > Mar 05 09:51:56.26: [ 647]: --> [22:+FDCS: 0,5,0,2,0,0,0,0] > Mar 05 09:51:56.26: [ 647]: REMOTE wants 14400 bit/s > Mar 05 09:51:56.26: [ 647]: REMOTE wants page width 1728 pixels in > 215 mm > Mar 05 09:51:56.26: [ 647]: REMOTE wants unlimited page length > Mar 05 09:51:56.26: [ 647]: REMOTE wants 3.85 line/mm > Mar 05 09:51:56.26: [ 647]: REMOTE wants 1-D MR > Mar 05 09:51:56.26: [ 647]: --> [7:CONNECT] > Mar 05 09:51:56.26: [ 647]: RECV: begin page > Mar 05 09:51:56.26: [ 647]: RECV: send trigger 022 > Mar 05 09:52:17.27: [ 647]: RECV: 955 total lines, 0 bad lines, 0 > consecutive bad lines > Mar 05 09:52:17.27: [ 647]: --> [17:+FPTS: 1,2219,0,0] > Mar 05 09:52:18.50: [ 647]: --> [8:+FHNG: 0] > Mar 05 09:52:18.50: [ 647]: REMOTE HANGUP: Normal and proper end of > connection (code 0) > Mar 05 09:52:19.93: [ 647]: --> [2:OK] > Mar 05 09:52:19.93: [ 647]: RECV recv MPS (more pages, same > document) > Mar 05 09:52:49.93: [ 647]: MODEM <Timeout> > Mar 05 09:52:49.93: [ 647]: RECV FAX (00002223): recvq/fax00258.tif > from FIOT4.24, route to <unspecified>, 0 pages in 1:00 > Mar 05 09:52:49.93: [ 647]: RECV FAX: Normal and proper end of > connection > Mar 05 09:52:49.93: [ 647]: RECV FAX (00002223): session with > FIOT4.24 terminated abnormally: Normal and proper end of connection > Mar 05 09:52:49.93: [ 647]: RECV FAX: bin/faxrcvd > "recvq/fax00258.tif" "ttyS1" "00002223" "Normal and proper end of > connection" ____________________ HylaFAX(tm) Users Mailing List _______________________ To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
- Prev by Date: Re: [hylafax-users] faxgetty sucking up too much memory
- Next by Date: [hylafax-users] postfix users: mail-to-fax script
- Prev by thread: Re: [hylafax-users] MT5600ZDX and receive errors
- Next by thread: Re: [hylafax-users] tiff2ps (Resolved) (was Concatenatin
- Index(es):
Project hosted by iFAX Solutions