[hylafax-users] Re[2]: wheel of faxtune

[Marcin Krol <mark@btweng.krakow.pl>]

Hello Giulio,

Monday, February 26, 2001, 7:49:05 PM, you wrote:

GO> The file might or might not be there; I agree this is a bit confusing.
GO> The log clearly shows a receive error, so that the file is not there.
GO> If you look at the faxrcvd script, you see that it tests if the file
GO> actually exists and if it does not exist it takes the route of the
GO> failed receive attempt.

I got really amazing mail from hyla:

---
An attempt to receive facsimile on cua1 failed because:

    COMREC error

    ---- Transcript of session follows ----

lut 26 19:34:55.44: [29356]: SESSION BEGIN 00000006 48122693605
lut 26 19:34:55.44: [29356]: <-- [4:ATA\r]
lut 26 19:35:20.66: [29356]: --> [5:+FCON]
lut 26 19:35:20.66: [29356]: ANSWER: FAX CONNECTION
lut 26 19:35:20.66: [29356]: RECV FAX: begin
lut 26 19:35:24.28: [29356]: --> [21:+FDCS:0,3,0,2,0,0,0,0]
lut 26 19:35:24.28: [29356]: REMOTE wants 9600 bit/s
lut 26 19:35:24.28: [29356]: REMOTE wants page width 1728 pixels in 215 mm
lut 26 19:35:24.28: [29356]: REMOTE wants unlimited page length 
lut 26 19:35:24.28: [29356]: REMOTE wants 3.85 line/mm
lut 26 19:35:24.28: [29356]: REMOTE wants 1-D MR
lut 26 19:35:24.28: [29356]: --> [2:OK]
lut 26 19:35:24.28: [29356]: <-- [7:AT+FDR\r]
lut 26 19:35:25.72: [29356]: --> [5:+FCFR]
lut 26 19:35:25.72: [29356]: --> [21:+FDCS:0,3,0,2,0,0,0,0]
lut 26 19:35:25.72: [29356]: REMOTE wants 9600 bit/s
lut 26 19:35:25.72: [29356]: REMOTE wants page width 1728 pixels in 215 mm
lut 26 19:35:25.72: [29356]: REMOTE wants unlimited page length 
lut 26 19:35:25.72: [29356]: REMOTE wants 3.85 line/mm
lut 26 19:35:25.72: [29356]: REMOTE wants 1-D MR
lut 26 19:35:26.20: [29356]: --> [7:CONNECT]
lut 26 19:35:26.20: [29356]: RECV: begin page
lut 26 19:35:26.20: [29356]: RECV: send trigger 022
lut 26 19:35:52.53: [29356]: RECV: 4872 bytes of data, 215 total lines
lut 26 19:35:52.53: [29356]: --> [21:+FPTS:2,214,214,214,0]
lut 26 19:35:53.86: [29356]: --> [6:+FET:2]
lut 26 19:35:53.86: [29356]: RECV recv EOP (no more pages or documents)
lut 26 19:35:53.86: [29356]: --> [2:OK]
lut 26 19:35:53.86: [29356]: RECV send RTN (retrain negative)
lut 26 19:35:53.86: [29356]: <-- [7:AT+FDR\r]
lut 26 19:35:57.08: [29356]: --> [8:+FHNG:72]
lut 26 19:35:57.08: [29356]: REMOTE HANGUP: COMREC error (code 72)
lut 26 19:35:57.08: [29356]: RECV FAX (00000006): recvq/fax00002.tif from <UNSPECIFIED>, route
to <unspecified>, 0 pages in 0:37
lut 26 19:35:57.08: [29356]: RECV FAX: COMREC error
lut 26 19:35:57.08: [29356]: RECV FAX (00000006): session with <UNSPECIFIED> terminated
abnormally: COMREC error
lut 26 19:35:57.08: [29356]: RECV FAX: bin/faxrcvd "recvq/fax00002.tif" "cua1" "00000006"
"COMREC error"
---

I mean, I could understand if this was physical device that protests
against such parameters but why should software care?!


Regards,

Marcin Krol

...Put knot yore trust inn spel chequers




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null