[hylafax-users] Request for a config file working

[Pedro_Rocadas/CREDITUS/PT%CREDITUS@creditus.pt]

Ok. Thnaks to everyone who are helping me. I think the best thing to do now
is giving the complete info of my hardware and software.

software: Mandrake 7.2. Ghostscript 5..50, gcc-2-95.2,
glib1.2.8,hylafax4.1beta1-1rh5.rpm(!)

modems:(a nightmare, all i have don't have smileys :))) ):USRobotics 56k
Voice Faxmodem,  Diamond SupraExpress56e Pro and Multitech MT5600ZDX.

Faxaddmodem command
Class1 output

USRobotics: U.S. Robotics 56k Voice EXT Rev 11.1.22

Diamond:  Product code ATI0 is 5600 ATI3 is "REV 2.000-01(c) 1993-1998"

MultiTech: Product code ATI0 is "MT5600 ZDX" ATI3 is "V2.200F-V90_2M_DLS"

Class2 output

USRobotics: U.S. Robotics 56k Voice

Diamond:  Manufacturer "ROCKWELL"  Modem Model "AC/K56"

MultiTech: Modem Manufacturer "ROCKWELL"  Modem Model "MultiModem ZDX"


About the MaxRecvPages. If i remove the Tag the fax and the modem could
communicate. In all modems i must work in 1.0 Class and the baud rate stays
at 14400. My last output with the USRob modem without the MaxReceivPage:

Feb 14 21:38:35.75: [ 1115]: SESSION BEGIN 00000088 3511111122222
Feb 14 21:38:35.75: [ 1115]: <-- [4:ATA\r]
Feb 14 21:38:41.03: [ 1115]: --> [7:CONNECT]
Feb 14 21:38:41.03: [ 1115]: ANSWER: FAX CONNECTION
Feb 14 21:38:41.03: [ 1115]: RECV FAX: begin
Feb 14 21:38:41.04: [ 1115]: <-- data [23]
Feb 14 21:38:41.04: [ 1115]: <-- data [2]
Feb 14 21:38:41.07: [ 1115]: --> [7:CONNECT]
Feb 14 21:38:41.07: [ 1115]: <-- data [10]
Feb 14 21:38:41.07: [ 1115]: <-- data [2]
Feb 14 21:38:43.01: [ 1115]: --> [2:OK]
Feb 14 21:38:43.01: [ 1115]: <-- [9:AT+FRH=3\r]
Feb 14 21:38:43.96: [ 1115]: --> [7:CONNECT]
Feb 14 21:38:45.17: [ 1115]: --> [2:OK]
Feb 14 21:38:45.17: [ 1115]: REMOTE TSI "1111111111"
Feb 14 21:38:45.17: [ 1115]: <-- [9:AT+FRH=3\r]
Feb 14 21:38:45.19: [ 1115]: --> [7:CONNECT]
Feb 14 21:38:45.46: [ 1115]: --> [2:OK]
Feb 14 21:38:45.46: [ 1115]: REMOTE wants 14400 bit/s
Feb 14 21:38:45.46: [ 1115]: REMOTE wants page width 1728 pixels in 215 mm
Feb 14 21:38:45.46: [ 1115]: REMOTE wants unlimited page length
Feb 14 21:38:45.46: [ 1115]: REMOTE wants 3.85 line/mm
Feb 14 21:38:45.46: [ 1115]: REMOTE wants 2-D MR
Feb 14 21:38:45.46: [ 1115]: RECV training at v.17 14400 bit/s
Feb 14 21:38:45.46: [ 1115]: <-- [11:AT+FRM=145\r]
Feb 14 21:38:47.16: [ 1115]: --> [7:CONNECT]
Feb 14 21:38:48.71: [ 1115]: RECV: TCF 2811 bytes, 3% non-zero, 2697
zero-run
Feb 14 21:38:48.72: [ 1115]: --> [10:NO CARRIER]
Feb 14 21:38:48.72: [ 1115]: DELAY 75 ms
Feb 14 21:38:48.80: [ 1115]: <-- [9:AT+FTH=3\r]
Feb 14 21:38:49.00: [ 1115]: --> [7:CONNECT]
Feb 14 21:38:49.00: [ 1115]: <-- data [3]
Feb 14 21:38:49.00: [ 1115]: <-- data [2]
Feb 14 21:38:50.18: [ 1115]: --> [2:OK]
Feb 14 21:38:50.18: [ 1115]: TRAINING succeeded
Feb 14 21:38:50.18: [ 1115]: <-- [11:AT+FRM=146\r]
Feb 14 21:38:51.52: [ 1115]: --> [7:CONNECT]
Feb 14 21:38:51.52: [ 1115]: RECV: begin page

And stops.....

With the other modems worst...

Feb 15 10:19:31.28: [ 1116]: SESSION BEGIN 00000095 35111111111
Feb 15 10:19:37.43: [ 1116]: ANSWER: FAX CONNECTION

and stops....

the faxxxxxxxx.tiff file size: 8b....


Well i hope there's anyone out there who have a config file working:))))



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null