Re: [hylafax-users] send works with USR only

[Lee Howard <faxguy@deanox.com>]

At 06:25 PM 2/14/01 -0700, Lee Howard wrote:

>Here's an interesting issue.  Attached are three send logs.  When trying to
>send from any non-Class-2.0-capable modem (I've tried at least four
>different modems, including a USR-Class-1-only modem) in Class 1 the send
>fails with "no carrier detected".  When trying to send in Class 2 (I've
>only tried one modem, but two attempts) the send fails with "No answer
>(T.30 T1 timeout)".  However, when sending from a Class-2.0-capable modem,
>whether using Class 1 or Class 2.0, the send goes fine.

I didn't mention (but it should be apparent from the logs) that I get this
error only when dealing with this *one* particular remote fax "machine".

>Attached are three logs.
>
>c00002114 is Class 1 attempt with Conexant-chipset modem - failed
>c00002116 is Class 2 attempt (same modem as c00002114) - failed
>c00000006 is Class 2.0 attempt with USR 28.8 modem - successful
>c00000007 is Class 1 attempt with USR 28.8 modem - successful

Apparently I can't count, either.  Sorry, in case any of you are confused
;-) I meant to say that *four* logs were attached.  (I hadn't planned on
the USR Class 1 send succeeding.)

Lee.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null