[hylafax-users] the log grow up like a dinosaur!

["cislrimini@libero.it" <cislrimini@libero.it>]

Hi friends!

It's the third time in a week that, with a Modem US Robotics 56k 
Faxmodem external, during a fac-simile receiving faxgetty crash, the 
modem lights keeps on and the log grow grow grow up until i killall the 
faxgetty!

Here's an extract of the log:

Dec 06 12:25:56.98: [ 3150]: SESSION BEGIN 00000362 00390541774109
Dec 06 12:25:56.98: [ 3150]: <-- [4:ATA\r]
Dec 06 12:26:02.27: [ 3150]: --> [7:CONNECT]
Dec 06 12:26:02.27: [ 3150]: ANSWER: FAX CONNECTION
Dec 06 12:26:02.27: [ 3150]: RECV FAX: begin
Dec 06 12:26:02.27: [ 3150]: <-- data [23]
Dec 06 12:26:02.27: [ 3150]: <-- data [2]
Dec 06 12:26:02.30: [ 3150]: --> [7:CONNECT]
Dec 06 12:26:02.30: [ 3150]: <-- data [10]
Dec 06 12:26:02.30: [ 3150]: <-- data [2]
Dec 06 12:26:04.25: [ 3150]: --> [2:OK]
Dec 06 12:26:04.25: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:04.81: [ 3150]: --> [7:CONNECT]
Dec 06 12:26:06.16: [ 3150]: --> [2:OK]
Dec 06 12:26:06.16: [ 3150]: REMOTE TSI "514210320"
Dec 06 12:26:06.16: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:06.18: [ 3150]: --> [7:CONNECT]
Dec 06 12:26:06.46: [ 3150]: --> [2:OK]
Dec 06 12:26:06.46: [ 3150]: REMOTE wants 9600 bit/s
Dec 06 12:26:06.46: [ 3150]: REMOTE wants page width 1728 pixels in 215 
mm
Dec 06 12:26:06.46: [ 3150]: REMOTE wants unlimited page length 
Dec 06 12:26:06.46: [ 3150]: REMOTE wants 3.85 line/mm
Dec 06 12:26:06.46: [ 3150]: REMOTE wants 2-D MR
Dec 06 12:26:06.46: [ 3150]: RECV training at v.29 9600 bit/s
Dec 06 12:26:06.46: [ 3150]: <-- [10:AT+FRM=96\r]
Dec 06 12:26:06.85: [ 3150]: --> [7:CONNECT]
Dec 06 12:26:08.52: [ 3150]: RECV: TCF 2013 bytes, 3% non-zero, 1947 
zero-run
Dec 06 12:26:08.53: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:08.53: [ 3150]: DELAY 75 ms
Dec 06 12:26:08.61: [ 3150]: <-- [9:AT+FTH=3\r]
Dec 06 12:26:08.81: [ 3150]: --> [7:CONNECT]
Dec 06 12:26:08.81: [ 3150]: <-- data [3]
Dec 06 12:26:08.81: [ 3150]: <-- data [2]
Dec 06 12:26:09.98: [ 3150]: --> [2:OK]
Dec 06 12:26:09.98: [ 3150]: TRAINING succeeded
Dec 06 12:26:09.98: [ 3150]: <-- [10:AT+FRM=96\r]
Dec 06 12:26:10.49: [ 3150]: --> [7:CONNECT]
Dec 06 12:26:10.49: [ 3150]: RECV: begin page
Dec 06 12:26:13.42: [ 3150]: RECV: 258 total lines, 0 bad lines, 0 
consecutive bad lines
Dec 06 12:26:13.42: [ 3150]: RECV: end page
Dec 06 12:26:13.42: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:13.42: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.41: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.41: [ 3150]: MODEM No carrier
Dec 06 12:26:22.41: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.43: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.43: [ 3150]: MODEM No carrier
Dec 06 12:26:22.43: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.45: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.45: [ 3150]: MODEM No carrier
Dec 06 12:26:22.45: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.47: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.47: [ 3150]: MODEM No carrier
Dec 06 12:26:22.47: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.49: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.49: [ 3150]: MODEM No carrier
Dec 06 12:26:22.49: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.51: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.51: [ 3150]: MODEM No carrier
Dec 06 12:26:22.51: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.53: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.53: [ 3150]: MODEM No carrier
Dec 06 12:26:22.53: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.55: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.55: [ 3150]: MODEM No carrier
Dec 06 12:26:22.55: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.57: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.57: [ 3150]: MODEM No carrier
Dec 06 12:26:22.57: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.59: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.59: [ 3150]: MODEM No carrier
Dec 06 12:26:22.59: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.61: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.61: [ 3150]: MODEM No carrier
Dec 06 12:26:22.61: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.63: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.63: [ 3150]: MODEM No carrier
Dec 06 12:26:22.63: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.65: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.65: [ 3150]: MODEM No carrier
Dec 06 12:26:22.65: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.67: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.67: [ 3150]: MODEM No carrier
Dec 06 12:26:22.67: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.69: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.69: [ 3150]: MODEM No carrier
Dec 06 12:26:22.69: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.71: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.71: [ 3150]: MODEM No carrier
Dec 06 12:26:22.71: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.73: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.73: [ 3150]: MODEM No carrier
Dec 06 12:26:22.73: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.75: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.75: [ 3150]: MODEM No carrier
Dec 06 12:26:22.75: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.77: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.77: [ 3150]: MODEM No carrier
Dec 06 12:26:22.77: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.79: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.79: [ 3150]: MODEM No carrier
Dec 06 12:26:22.79: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.81: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.81: [ 3150]: MODEM No carrier

I can't find the solutions.  
I've also upgraded to the last version of Hylafax (p8), but the rpm 
install script doesn't work.

Can you suggest me something?

Thanks you for your interest, bye!

Francesco Collini



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null