 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] a log grow up until 220 megabite!
- To: hylafax-users@hylafax.org
- Subject: [hylafax-users] a log grow up until 220 megabite!
- From: "cislrimini@libero.it" <cislrimini@libero.it>
- Date: Fri, 8 Dec 2000 10:37:02 +0100
Hello! I'm writing, again, to explain a problem: sometimes, when receiving a fac-simile, a strange condition verify and the modem keeps up until i give the command killall -HUP faxgetty. This causes me two problems: - it keeps the line busy because the modem remained in answer-mode - the log grows up like a "monster" until i kill faxgetty. Here's an extract of this log. I've tried to install the last version of hylafax, 4-1beta2-8rh6.i386.rpm but there is an error in compiling, i think, because after installing this rpm it gives an error executing the install script. the log: -------- Dec 06 12:25:56.98: [ 3150]: SESSION BEGIN 00000362 00390541774109 Dec 06 12:25:56.98: [ 3150]: <-- [4:ATA\r] Dec 06 12:26:02.27: [ 3150]: --> [7:CONNECT] Dec 06 12:26:02.27: [ 3150]: ANSWER: FAX CONNECTION Dec 06 12:26:02.27: [ 3150]: RECV FAX: begin Dec 06 12:26:02.27: [ 3150]: <-- data [23] Dec 06 12:26:02.27: [ 3150]: <-- data [2] Dec 06 12:26:02.30: [ 3150]: --> [7:CONNECT] Dec 06 12:26:02.30: [ 3150]: <-- data [10] Dec 06 12:26:02.30: [ 3150]: <-- data [2] Dec 06 12:26:04.25: [ 3150]: --> [2:OK] Dec 06 12:26:04.25: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:04.81: [ 3150]: --> [7:CONNECT] Dec 06 12:26:06.16: [ 3150]: --> [2:OK] Dec 06 12:26:06.16: [ 3150]: REMOTE TSI "514210320" Dec 06 12:26:06.16: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:06.18: [ 3150]: --> [7:CONNECT] Dec 06 12:26:06.46: [ 3150]: --> [2:OK] Dec 06 12:26:06.46: [ 3150]: REMOTE wants 9600 bit/s Dec 06 12:26:06.46: [ 3150]: REMOTE wants page width 1728 pixels in 215 mm Dec 06 12:26:06.46: [ 3150]: REMOTE wants unlimited page length Dec 06 12:26:06.46: [ 3150]: REMOTE wants 3.85 line/mm Dec 06 12:26:06.46: [ 3150]: REMOTE wants 2-D MR Dec 06 12:26:06.46: [ 3150]: RECV training at v.29 9600 bit/s Dec 06 12:26:06.46: [ 3150]: <-- [10:AT+FRM=96\r] Dec 06 12:26:06.85: [ 3150]: --> [7:CONNECT] Dec 06 12:26:08.52: [ 3150]: RECV: TCF 2013 bytes, 3% non-zero, 1947 zero-run Dec 06 12:26:08.53: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:08.53: [ 3150]: DELAY 75 ms Dec 06 12:26:08.61: [ 3150]: <-- [9:AT+FTH=3\r] Dec 06 12:26:08.81: [ 3150]: --> [7:CONNECT] Dec 06 12:26:08.81: [ 3150]: <-- data [3] Dec 06 12:26:08.81: [ 3150]: <-- data [2] Dec 06 12:26:09.98: [ 3150]: --> [2:OK] Dec 06 12:26:09.98: [ 3150]: TRAINING succeeded Dec 06 12:26:09.98: [ 3150]: <-- [10:AT+FRM=96\r] Dec 06 12:26:10.49: [ 3150]: --> [7:CONNECT] Dec 06 12:26:10.49: [ 3150]: RECV: begin page Dec 06 12:26:13.42: [ 3150]: RECV: 258 total lines, 0 bad lines, 0 consecutive bad lines Dec 06 12:26:13.42: [ 3150]: RECV: end page Dec 06 12:26:13.42: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:13.42: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.41: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.41: [ 3150]: MODEM No carrier Dec 06 12:26:22.41: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.43: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.43: [ 3150]: MODEM No carrier Dec 06 12:26:22.43: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.45: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.45: [ 3150]: MODEM No carrier Dec 06 12:26:22.45: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.47: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.47: [ 3150]: MODEM No carrier Dec 06 12:26:22.47: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.49: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.49: [ 3150]: MODEM No carrier Dec 06 12:26:22.49: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.51: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.51: [ 3150]: MODEM No carrier Dec 06 12:26:22.51: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.53: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.53: [ 3150]: MODEM No carrier Dec 06 12:26:22.53: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.55: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.55: [ 3150]: MODEM No carrier Dec 06 12:26:22.55: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.57: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.57: [ 3150]: MODEM No carrier Dec 06 12:26:22.57: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.59: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.59: [ 3150]: MODEM No carrier Dec 06 12:26:22.59: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.61: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.61: [ 3150]: MODEM No carrier Dec 06 12:26:22.61: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.63: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.63: [ 3150]: MODEM No carrier Dec 06 12:26:22.63: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.65: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.65: [ 3150]: MODEM No carrier Dec 06 12:26:22.65: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.67: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.67: [ 3150]: MODEM No carrier Dec 06 12:26:22.67: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.69: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.69: [ 3150]: MODEM No carrier Dec 06 12:26:22.69: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.71: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.71: [ 3150]: MODEM No carrier Dec 06 12:26:22.71: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.73: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.73: [ 3150]: MODEM No carrier Dec 06 12:26:22.73: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.75: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.75: [ 3150]: MODEM No carrier Dec 06 12:26:22.75: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.77: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.77: [ 3150]: MODEM No carrier Dec 06 12:26:22.77: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.79: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.79: [ 3150]: MODEM No carrier Dec 06 12:26:22.79: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.81: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.81: [ 3150]: MODEM No carrier Dec 06 12:26:22.81: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.83: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.83: [ 3150]: MODEM No carrier Dec 06 12:26:22.83: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.85: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.85: [ 3150]: MODEM No carrier Dec 06 12:26:22.85: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.87: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.87: [ 3150]: MODEM No carrier Dec 06 12:26:22.87: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.89: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.89: [ 3150]: MODEM No carrier Dec 06 12:26:22.89: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.91: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.91: [ 3150]: MODEM No carrier Dec 06 12:26:22.91: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.93: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.93: [ 3150]: MODEM No carrier Dec 06 12:26:22.93: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.95: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.95: [ 3150]: MODEM No carrier Dec 06 12:26:22.95: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.97: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.97: [ 3150]: MODEM No carrier Dec 06 12:26:22.97: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:22.99: [ 3150]: --> [10:NO CARRIER] Dec 06 12:26:22.99: [ 3150]: MODEM No carrier Dec 06 12:26:22.99: [ 3150]: <-- [9:AT+FRH=3\r] Dec 06 12:26:23.01: [ 3150]: --> [10:NO CARRIER] AND SO ON UNTIL THE INFINITE! Thanks you in advance for your interest and excuse me for my bad english; i'm italian! Hoping hear from you soon, Francesco Collini ____________________ HylaFAX(tm) Users Mailing List _______________________ To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
- Prev by Date: [hylafax-users] [Newbie -> S.O.S.] Unable to configure/send fax from Hylafax
- Next by Date: Re: [hylafax-users] programming question
- Prev by thread: [hylafax-users] [Newbie -> S.O.S.] Unable to configure/send fax from Hylafax
- Next by thread: [hylafax-users] Can not reach server at host "localhost" , port 4559
- Index(es):
Project hosted by iFAX Solutions