[hylafax-users] a log grow up until 240 megabyte!!!

["cislrimini@libero.it" <cislrimini@libero.it>]

Hi!

My name's Francesco Collini and i'm an italian linux-fan computer 
consultant.

In a Red Hat 6.2 Linux Server with Hylafax 4.01p7 i had four times this 
problem:

a fax arrives; it opens the line and then the lines keeps up until i, 
manually, enter killall -HUP faxgetty.

The modem shows three lights that don't move; faxstat -sld always tells 
me that it's receiving a fax from 051 ......

If i don't kill faxgetty everything continues to the infinite.

Here's an extract! of this log.

FROM THE BEGINNING:

Dec 06 12:25:56.98: [ 3150]: SESSION BEGIN 00000362 00390541774109
Dec 06 12:25:56.98: [ 3150]: <-- [4:ATA\r]
Dec 06 12:26:02.27: [ 3150]: --> [7:CONNECT]
Dec 06 12:26:02.27: [ 3150]: ANSWER: FAX CONNECTION
Dec 06 12:26:02.27: [ 3150]: RECV FAX: begin
Dec 06 12:26:02.27: [ 3150]: <-- data [23]
Dec 06 12:26:02.27: [ 3150]: <-- data [2]
Dec 06 12:26:02.30: [ 3150]: --> [7:CONNECT]
Dec 06 12:26:02.30: [ 3150]: <-- data [10]
Dec 06 12:26:02.30: [ 3150]: <-- data [2]
Dec 06 12:26:04.25: [ 3150]: --> [2:OK]
Dec 06 12:26:04.25: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:04.81: [ 3150]: --> [7:CONNECT]
Dec 06 12:26:06.16: [ 3150]: --> [2:OK]
Dec 06 12:26:06.16: [ 3150]: REMOTE TSI "514210320"
Dec 06 12:26:06.16: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:06.18: [ 3150]: --> [7:CONNECT]
Dec 06 12:26:06.46: [ 3150]: --> [2:OK]
Dec 06 12:26:06.46: [ 3150]: REMOTE wants 9600 bit/s
Dec 06 12:26:06.46: [ 3150]: REMOTE wants page width 1728 pixels in 215 
mm
Dec 06 12:26:06.46: [ 3150]: REMOTE wants unlimited page length 
Dec 06 12:26:06.46: [ 3150]: REMOTE wants 3.85 line/mm
Dec 06 12:26:06.46: [ 3150]: REMOTE wants 2-D MR
Dec 06 12:26:06.46: [ 3150]: RECV training at v.29 9600 bit/s
Dec 06 12:26:06.46: [ 3150]: <-- [10:AT+FRM=96\r]
Dec 06 12:26:06.85: [ 3150]: --> [7:CONNECT]
Dec 06 12:26:08.52: [ 3150]: RECV: TCF 2013 bytes, 3% non-zero, 1947 
zero-run
Dec 06 12:26:08.53: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:08.53: [ 3150]: DELAY 75 ms
Dec 06 12:26:08.61: [ 3150]: <-- [9:AT+FTH=3\r]
Dec 06 12:26:08.81: [ 3150]: --> [7:CONNECT]
Dec 06 12:26:08.81: [ 3150]: <-- data [3]
Dec 06 12:26:08.81: [ 3150]: <-- data [2]
Dec 06 12:26:09.98: [ 3150]: --> [2:OK]
Dec 06 12:26:09.98: [ 3150]: TRAINING succeeded
Dec 06 12:26:09.98: [ 3150]: <-- [10:AT+FRM=96\r]
Dec 06 12:26:10.49: [ 3150]: --> [7:CONNECT]
Dec 06 12:26:10.49: [ 3150]: RECV: begin page
Dec 06 12:26:13.42: [ 3150]: RECV: 258 total lines, 0 bad lines, 0 
consecutive bad lines
Dec 06 12:26:13.42: [ 3150]: RECV: end page
Dec 06 12:26:13.42: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:13.42: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.41: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.41: [ 3150]: MODEM No carrier
Dec 06 12:26:22.41: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.43: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.43: [ 3150]: MODEM No carrier
Dec 06 12:26:22.43: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.45: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.45: [ 3150]: MODEM No carrier
Dec 06 12:26:22.45: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.47: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.47: [ 3150]: MODEM No carrier
Dec 06 12:26:22.47: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.49: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.49: [ 3150]: MODEM No carrier
Dec 06 12:26:22.49: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.51: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.51: [ 3150]: MODEM No carrier
Dec 06 12:26:22.51: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.53: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.53: [ 3150]: MODEM No carrier
Dec 06 12:26:22.53: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.55: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.55: [ 3150]: MODEM No carrier
Dec 06 12:26:22.55: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.57: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.57: [ 3150]: MODEM No carrier
Dec 06 12:26:22.57: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.59: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.59: [ 3150]: MODEM No carrier
Dec 06 12:26:22.59: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.61: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.61: [ 3150]: MODEM No carrier
Dec 06 12:26:22.61: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.63: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.63: [ 3150]: MODEM No carrier
Dec 06 12:26:22.63: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.65: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.65: [ 3150]: MODEM No carrier
Dec 06 12:26:22.65: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.67: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.67: [ 3150]: MODEM No carrier
Dec 06 12:26:22.67: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.69: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.69: [ 3150]: MODEM No carrier
Dec 06 12:26:22.69: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.71: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.71: [ 3150]: MODEM No carrier
Dec 06 12:26:22.71: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.73: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.73: [ 3150]: MODEM No carrier
Dec 06 12:26:22.73: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.75: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.75: [ 3150]: MODEM No carrier
Dec 06 12:26:22.75: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.77: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.77: [ 3150]: MODEM No carrier
Dec 06 12:26:22.77: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.79: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.79: [ 3150]: MODEM No carrier
Dec 06 12:26:22.79: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.81: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.81: [ 3150]: MODEM No carrier
Dec 06 12:26:22.81: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.83: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.83: [ 3150]: MODEM No carrier
Dec 06 12:26:22.83: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.85: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.85: [ 3150]: MODEM No carrier
Dec 06 12:26:22.85: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.87: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.87: [ 3150]: MODEM No carrier
Dec 06 12:26:22.87: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.89: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.89: [ 3150]: MODEM No carrier
Dec 06 12:26:22.89: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.91: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.91: [ 3150]: MODEM No carrier
Dec 06 12:26:22.91: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.93: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.93: [ 3150]: MODEM No carrier
Dec 06 12:26:22.93: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.95: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.95: [ 3150]: MODEM No carrier
Dec 06 12:26:22.95: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.97: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.97: [ 3150]: MODEM No carrier
Dec 06 12:26:22.97: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:22.99: [ 3150]: --> [10:NO CARRIER]
Dec 06 12:26:22.99: [ 3150]: MODEM No carrier
Dec 06 12:26:22.99: [ 3150]: <-- [9:AT+FRH=3\r]
Dec 06 12:26:23.01: [ 3150]: --> [10:NO CARRIER]


....

AND SO ON UNTIL THE INFINITE.

Could someone help me?

I can't find any solutions on myself.

Excuse me for my poor english, i'm an italian and i have a school 
knowledge of the english.

Thanks you in advance for your interest.

Hoping see you soon,

Francesco



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null