HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Problem with ATS8=2 on olitec/rockwell modem



At 10:45 AM 11/23/00 +0100, Olivier Cappe wrote:
>Dear all,
>
>I am using Hylafax 4.0.2-14 on a debian 2.2 system, and I am experiencing
some

First, I'm not experienced with Debian's version numbering scheme, but my
guess is that 4.0.2 means 4.0pl2, which means that your HylaFAX version is
quite antiquated.  It most likely will be beneficial to install 4.1beta2 or
current CVS.

>troubles with the modem (which is an OLITEC Speed'Com 56000 modem which
uses a
>Rockwell K56 chipset). The problem occurs in the very begining of the
>communication :
>
>Nov 22 18:44:43 ornette FaxGetty[6479]: <-- [15:ATE0V1Q0S0=0H0\r]
>Nov 22 18:44:43 ornette FaxGetty[6479]: --> [2:OK]
>Nov 22 18:44:43 ornette FaxGetty[6479]: <-- [21:ATS8=2S7=60&K3&D3&C1\r]
>Nov 22 18:44:43 ornette FaxGetty[6479]: --> [5:ERROR]
>Nov 22 18:44:43 ornette FaxGetty[6479]: MODEM Command error
>
>Experiencing with minicom, I found out that the offending command is indeed
>"ATS8=2" which gives an ERROR (the modem doc says that S8 is set to 2 and is
>non-modifiable which may be why the problem occurs). The problem is that I
>don't see how to modify these initial commands in the config file (must be
some
>variable that is not present in the default config file).

I could be wrong, but I don't believe that current HylaFAX issues *any* AT
commands to the modem that are not either default HylaFAX settings or are
in the config.<devid> file.  If the problem is with a default setting, then
you need to issue a corrective setting in the config file.

If you read 'man config' you'll see that the default setting for
ModemCommaPauseTimeCmd is 'ATS8=2'.  Since issuing this command causes
ERROR, then my suggestion would be to add this line to your config.<devid>
file:

ModemCommaPauseTimeCmd:	AT

which should override the ATS8=2 setting.

Lee.




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions