Re: [hylafax-users] Busy signal detected

[Lee Howard <faxguy@deanox.com>]

At 05:53 PM 11/22/00 +0100, Sven Johannsen wrote:
>Hi,
>
>I've set up Hylafax with an old Zyxel U-1496EG modem, the modem was
>detected correctly by the faxaddmodem program. The modem was connected
>on a branch-link, so that I have to dial a "0" before getting a local
>loop.  I've tried to send a testpage, but Hylafax always announces that
>a busy signal was detected. I've tested the line with a telephone and it
>works. Can I define the local loop dialnumber (0) in the default
>settings? Any Ideas how I can debug or fix this problem?

See: http://www.hylafax.org/HylaFAQ/Q319.php

Also see 'man config' : ModemDialCmd

My guess is that you need to have...
ModemDialCmd:     ATDT0%s@
or
ModemDialCmd:     ATDT0%s
in your config.<devid> file.

Lee.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null