Re: [hylafax-users] Something new? Unspecified Transmit Phase D error.

[Lee Howard <faxguy@deanox.com>]

At 09:02 PM 11/14/00 +0100, David Tonhofer wrote:

>Ok, so I have set it up to use Class2.0 protocol with faxgetty
>and all. I tested the receipt of faxes, works like a charm...

Generally speaking, it is wiser to use USR modems in Class 1.  You can
search the mailing list for the explanation.  But, depending on who you
fax... you could be fine with Class 2.0.

>Right, now for the problem:
....
>Nov 14 20:52:59.36: [11124]: <-- [14:AT+FCLASS=2.0\r]
>Nov 14 20:52:59.50: [11124]: --> [2:OK]
>Nov 14 20:52:59.50: [11124]: <-- [9:AT+FLO=0\r]
>Nov 14 20:52:59.64: [11124]: --> [2:OK]

No flow control?  This is your problem, most likely.  Try changing
ModemFlowControl in the config file to RTSCTS

Attention developers... this is yet another case of someone not having a
prototype config file match durind faxaddmodem, and consequently the wrong
settings get used.  See Bug 79 and it's attached patch.

....
>Nov 14 20:53:00.34: [11124]: <-- [9:AT+FBU=1\r]
>Nov 14 20:53:00.48: [11124]: --> [5:ERROR]
>Nov 14 20:53:00.48: [11124]: MODEM Command error

Your config file should have AT+FBU=0 instead of AT+FBU=1.  But this isn't
your problem... it just makes for an ugly log file.

Lee.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null