[hylafax-users] send failure

[dean-mercer@home.com]

I am very new to this...I have looked though the faqs, setup docs and 
troubleshooting but I cannot find an answer to my problem.  I am using a 
netaccess MPM-4 the following is the same failure...Only about the top 3 
inches of the doc get transitted.

Thanks in advance for any help

Nov 09 01:32:54.50: [ 1860]: SESSION BEGIN 00000023 14157096194
Nov 09 01:32:54.50: [ 1860]: SEND FAX: JOB 17 DEST 7096194 COMMID 
00000023
Nov 09 01:32:54.50: [ 1860]: DELAY 2600 ms
Nov 09 01:32:57.10: [ 1860]: <-- [4:ATZ\r]
Nov 09 01:32:57.24: [ 1860]: --> [2:OK]
Nov 09 01:32:57.24: [ 1860]: <-- [15:ATE0V1Q0S0=0H0\r]
Nov 09 01:32:57.76: [ 1860]: --> [14:ATE0V1Q0S0=0H0]
Nov 09 01:32:57.76: [ 1860]: --> [2:OK]
Nov 09 01:32:57.76: [ 1860]: <-- [12:ATS8=2S7=60\r]
Nov 09 01:32:57.92: [ 1860]: --> [2:OK]
Nov 09 01:32:57.92: [ 1860]: <-- [12:AT+FCLASS=2\r]
Nov 09 01:32:58.08: [ 1860]: --> [2:OK]
Nov 09 01:32:58.08: [ 1860]: <-- [10:AT+FTBC=0\r]
Nov 09 01:32:58.24: [ 1860]: --> [2:OK]
Nov 09 01:32:58.24: [ 1860]: <-- [10:AT+FBOR=0\r]
Nov 09 01:32:58.39: [ 1860]: --> [2:OK]
Nov 09 01:32:58.39: [ 1860]: <-- [13:AT+FPHCTO=30\r]
Nov 09 01:32:58.55: [ 1860]: --> [2:OK]
Nov 09 01:32:58.55: [ 1860]: <-- [24:AT+FDCC=1,5,2,2,3,0,0,0\r]
Nov 09 01:32:58.73: [ 1860]: --> [2:OK]
Nov 09 01:32:58.73: [ 1860]: <-- [5:ATM0\r]
Nov 09 01:32:58.88: [ 1860]: --> [2:OK]
Nov 09 01:32:58.88: [ 1860]: <-- [12:AT+FCLASS=2\r]
Nov 09 01:32:59.14: [ 1860]: --> [2:OK]
Nov 09 01:32:59.14: [ 1860]: <-- [10:AT+FTBC=0\r]
Nov 09 01:32:59.39: [ 1860]: --> [2:OK]
Nov 09 01:32:59.39: [ 1860]: <-- [10:AT+FBOR=0\r]
Nov 09 01:32:59.64: [ 1860]: --> [2:OK]
Nov 09 01:32:59.64: [ 1860]: <-- [13:AT+FPHCTO=30\r]
Nov 09 01:32:59.90: [ 1860]: --> [2:OK]
Nov 09 01:32:59.90: [ 1860]: <-- [24:AT+FDCC=1,5,2,2,3,0,0,0\r]
Nov 09 01:33:00.18: [ 1860]: --> [2:OK]
Nov 09 01:33:00.18: [ 1860]: <-- [23:AT+FLID="NothingSetup"\r]
Nov 09 01:33:00.45: [ 1860]: --> [2:OK]
Nov 09 01:33:00.45: [ 1860]: <-- [24:AT+FDIS=0,5,0,2,0,0,0,0\r]
Nov 09 01:33:00.72: [ 1860]: --> [2:OK]
Nov 09 01:33:00.75: [ 1860]: DIAL 7096194
Nov 09 01:33:00.75: [ 1860]: <-- [12:ATDT7096194\r]

Nov 09 01:33:12.67: [ 1860]: --> [5:+FCON]
Nov 09 01:33:14.21: [ 1860]: --> [43:+FHR:FF 03 20 B5 00 2E 57 46 58 3A 37 
2E 30]
Nov 09 01:33:14.21: [ 1860]: --> [35:+FNSF:B5 00 2E 57 46 58 3A 37 2E 30]
Nov 09 01:33:14.21: [ 1860]: REMOTE NSF "B5 00 2E 57 46 58 3A 37 2E 30"
Nov 09 01:33:14.21: [ 1860]: NSF remote fax equipment: Delrina 
Nov 09 01:33:14.21: [ 1860]: NSF remote station ID: ".WFX:7.0"
Nov 09 01:33:15.37: [ 1860]: --> [73:+FHR:FF 03 40 72 65 63 72 65 4D 20 20 
20 20 20 20 20 20 20 20 20 20 20 20]
Nov 09 01:33:15.37: [ 1860]: --> [28:+FCSI:"              Mercer"]
Nov 09 01:33:15.37: [ 1860]: REMOTE CSI "Mercer"
Nov 09 01:33:16.18: [ 1860]: --> [34:+FHR:FF 13 80 00 EE F8 C4 80 80 11]
Nov 09 01:33:16.18: [ 1860]: --> [21:+FDIS:1,5,0,2,3,1,1,0]
Nov 09 01:33:16.18: [ 1860]: --> [2:OK]
Nov 09 01:33:16.18: [ 1860]: REMOTE best rate 14400 bit/s
Nov 09 01:33:16.18: [ 1860]: REMOTE max page width 1728 pixels in 215 mm
Nov 09 01:33:16.18: [ 1860]: REMOTE max unlimited page length 
Nov 09 01:33:16.18: [ 1860]: REMOTE best vres 7.7 line/mm
Nov 09 01:33:16.18: [ 1860]: REMOTE best format 2-D MMR
Nov 09 01:33:16.18: [ 1860]: REMOTE supports T.30 Annex A, ECM
Nov 09 01:33:16.18: [ 1860]: REMOTE best 0 ms/scanline
Nov 09 01:33:16.18: [ 1860]: USE 14400 bit/s
Nov 09 01:33:16.18: [ 1860]: USE 0 ms/scanline
Nov 09 01:33:16.18: [ 1860]: SEND file "docq/doc26.ps;30"
Nov 09 01:33:16.19: [ 1860]: USE page width 1728 pixels in 215 mm
Nov 09 01:33:16.19: [ 1860]: USE unlimited page length 
Nov 09 01:33:16.19: [ 1860]: USE 3.85 line/mm
Nov 09 01:33:16.19: [ 1860]: USE 1-D MR
Nov 09 01:33:16.19: [ 1860]: <-- [7:AT+FDT\r]
Nov 09 01:33:16.34: [ 1860]: --> [73:+FHT:FF 03 43 74 61 63 69 6E 75 6D 20 
70 75 74 65 53 67 6E 69 68 74 6F 4E]
Nov 09 01:33:16.34: [ 1860]: --> [22:+FHT:FF 13 83 00 22 78]
Nov 09 01:33:23.46: [ 1860]: --> [13:+FHR:FF 13 84]
Nov 09 01:33:23.46: [ 1860]: --> [21:+FDCS:0,5,0,2,0,0,0,0]
Nov 09 01:33:23.80: [ 1860]: --> [7:CONNECT]
Nov 09 01:33:23.80: [ 1860]: SEND begin page
Nov 09 01:33:24.47: [ 1860]: SENT 17562 bytes of data
Nov 09 01:33:24.47: [ 1860]: SEND end page
Nov 09 01:36:24.47: [ 1860]: MODEM <Timeout>
Nov 09 01:36:24.47: [ 1860]: <-- [6:AT+FK\r]
Nov 09 01:36:54.47: [ 1860]: MODEM <Timeout>
Nov 09 01:36:54.47: [ 1860]: <-- [5:ATH0\r]
Nov 09 01:36:59.47: [ 1860]: MODEM <Timeout>
Nov 09 01:36:59.47: [ 1860]: SESSION END


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null