Re: [hylafax-users] Courier I-Modem ISDN/V.34 Problem

[C�dric Bole-Richard <c.bolerichard@fabi.fr>]

> C�dric Bole-Richard <c.bolerichard@fabi.fr> writes:
>
> > My version of HylaFAX is 4.1beta2.
>
> BTW, why not to use the latest .rpm?

I have tested 4.0pl2, i have the same problem.
>
> > My modem is new, i have received it wednesday.
> > I have tested :
> > ModemResetCmds: ATZ\nAT
>
> If I say "ATZ\nAT" do exactly that! Double quotes are *required* here.

OK, i have missed double quotes, but, always the problem with there.

Oct 25 11:04:01 Srv_Fabi02 FaxGetty[15281]: OPEN /dev/ttyS0
Oct 25 11:04:01 Srv_Fabi02 FaxGetty[15281]: MODEM set DTR OFF
Oct 25 11:04:01 Srv_Fabi02 FaxGetty[15281]: DELAY 2600 ms
Oct 25 11:04:03 Srv_Fabi02 FaxGetty[15281]: MODEM set DTR ON
Oct 25 11:04:03 Srv_Fabi02 FaxGetty[15281]: MODEM set baud rate: 38400 baud,
input flow RTS/CTS, output flow RTS/CTS
Oct 25 11:04:03 Srv_Fabi02 FaxGetty[15281]: MODEM flush i/o
Oct 25 11:04:03 Srv_Fabi02 FaxGetty[15281]: <-- [4:ATZ\r]
Oct 25 11:04:08 Srv_Fabi02 FaxGetty[15281]: MODEM TIMEOUT: reading line from
modem
Oct 25 11:04:08 Srv_Fabi02 FaxGetty[15281]: MODEM <Timeout>
Oct 25 11:04:08 Srv_Fabi02 FaxGetty[15281]: MODEM set DTR OFF
Oct 25 11:04:08 Srv_Fabi02 FaxGetty[15281]: DELAY 2600 ms
Oct 25 11:04:11 Srv_Fabi02 FaxGetty[15281]: MODEM set DTR ON
Oct 25 11:04:11 Srv_Fabi02 FaxGetty[15281]: MODEM set baud rate: 38400 baud,
input flow RTS/CTS, output flow RTS/CTS
Oct 25 11:04:11 Srv_Fabi02 FaxGetty[15281]: MODEM flush i/o
Oct 25 11:04:11 Srv_Fabi02 FaxGetty[15281]: <-- [4:ATZ\r]
Oct 25 11:04:16 Srv_Fabi02 FaxGetty[15281]: MODEM TIMEOUT: reading line from
modem
Oct 25 11:04:16 Srv_Fabi02 FaxGetty[15281]: MODEM <Timeout>
Oct 25 11:04:16 Srv_Fabi02 FaxGetty[15281]: MODEM set DTR OFF
Oct 25 11:04:16 Srv_Fabi02 FaxGetty[15281]: /dev/ttyS0: Can not initialize
modem.


>
> > ModemResetCmds: ATZ
> > ModemResetCmds: AT&F1
> > ModemResetCmds: ""
> >
> > In minicom, all command are OK. If i type the same sequence that
faxgetty in
> > minicom, it's OK !
> >
> > Always the same problem ...
> > I'm desperate :-(
>
> > My log :
> > Oct 24 17:54:22 Srv_Fabi02 FaxGetty[13358]: OPEN /dev/ttyS0
> > Oct 24 17:54:22 Srv_Fabi02 FaxGetty[13358]: MODEM set DTR OFF
> > Oct 24 17:54:22 Srv_Fabi02 FaxGetty[13358]: DELAY 2600 ms
> > Oct 24 17:54:25 Srv_Fabi02 FaxGetty[13358]: MODEM set DTR ON
> > Oct 24 17:54:25 Srv_Fabi02 FaxGetty[13358]: MODEM set baud rate: 19200
baud,
> > input flow RTS/CTS, output flow RTS/CTS
> > Oct 24 17:54:25 Srv_Fabi02 FaxGetty[13358]: MODEM flush i/o
> > Oct 24 17:54:25 Srv_Fabi02 FaxGetty[13358]: <-- [17:ATE0V1Q0X4S0=0H0\r]
>
> Still do not see ATZ ...
>
> > > try to add the following to your config.modem:
> > >
> > > ModemResetCmds: "ATZ\nAT"

I'm very desperate.

>
> Hope to hear from you soon,
> Dmitry

Thank very much Dmitry.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null