Re: [hylafax-users] Connecting External USR v.90 modem

["Tanner, Robby" <TANNER@Wardrop.com>]

Thanks Dmitry.
I applied the modifications you and Lee provided and it seems that the log
file has fewer errors.  I am still, however having trouble.  I ran another
test and have attached the session log.

As for the your comment regarding flow control, how do I configure to use
it?  Do I just edit the proper line(s) in the config.ttySx file?  I think
these are the relevant lines:

# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class2.0        # use this to supply a hint
#ModemRate:             19200           # max rate for DCE-DTE communication
#ModemFlowControl:      xonxoff         # XON/XOFF flow control assumed
#ModemSetupDTRCmd:      AT&D2           # setup so DTR drop resets modem
#ModemSetupDCDCmd:      AT&C1           # setup so DCD reflects carrier (or
not

For the sake of completeness, I have included the entire config file as an
attachment.

Also I have modified the following lines in config.ttyS1:

Class2NRCmd:            AT+FNR=1,1,1,0
Class2BUGCmd:           AT+FBU=0
Class2DCCQueryCMD:      "!(0,1),(0-7),(0-4),(0-2),(0),(0),(0),(0-7)"

I'm going to look into that noisy line theory.  I'll be pretty annoyed if
that is the case.

Cheers,
Rob


-----Original Message-----
From: Dmitry Bely [mailto:dbely@mail.ru]
Sent: September 27, 2000 11:59 PM
To: hylafax-users@hylafax.org
Subject: Re: [hylafax-users] Connecting External USR v.90 modem

Not necessary. The following

Sep 27 19:15:14.08: [ 1437]: <-- [9:AT+FLO=0\r]
Sep 27 19:15:14.22: [ 1437]: --> [2:OK]

shows that he tries to use the modem without flow control (possibly because 
the config is empty, but his Hylafax is not recent enough to setup the
correct default value for ModemFlowControl).

Hope to hear from you soon,
Dmitry




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null

faxtest.log

config.ttyS1