[hylafax-users] Unspecified Transmit Phase B error

[Matthias Gelbhardt <look@commy.de>]

Hello!

I have a really serious problem with our hylafax-installation. The Modem
connected to the server is an Elsa MicroLink 28.8TQV, and the following
ist printed to the Log, when the sevrer tries to send a fax:

Sep 25 17:14:44.61: [ 9570]: SESSION BEGIN 00001595 4925121
Sep 25 17:14:44.61: [ 9570]: SEND FAX: JOB 368 DEST 21 COMMID 00001595
Sep 25 17:14:44.61: [ 9570]: DELAY 2600 ms
Sep 25 17:14:47.21: [ 9570]: <-- [17:ATx3E0V1Q0S0=0H0\r]
Sep 25 17:14:47.23: [ 9570]: --> [2:OK]
Sep 25 17:14:47.23: [ 9570]: <-- [21:ATS8=2S7=60&K4&D2&C1\r]
Sep 25 17:14:47.26: [ 9570]: --> [2:OK]
Sep 25 17:14:47.26: [ 9570]: <-- [14:AT+FCLASS=2.0\r]
Sep 25 17:14:47.28: [ 9570]: --> [2:OK]
Sep 25 17:14:47.28: [ 9570]: <-- [9:AT+FLO=1\r]
Sep 25 17:14:47.30: [ 9570]: --> [2:OK]
Sep 25 17:14:47.30: [ 9570]: <-- [9:AT+FPP=0\r]
Sep 25 17:14:47.32: [ 9570]: --> [2:OK]
Sep 25 17:14:47.32: [ 9570]: <-- [9:AT+FBO=0\r]
Sep 25 17:14:47.34: [ 9570]: --> [2:OK]
Sep 25 17:14:47.34: [ 9570]: <-- [10:AT+FCT=30\r]
Sep 25 17:14:47.36: [ 9570]: --> [2:OK]
Sep 25 17:14:47.36: [ 9570]: <-- [15:AT+FNR=1,1,1,0\r]
Sep 25 17:14:47.38: [ 9570]: --> [2:OK]
Sep 25 17:14:47.38: [ 9570]: <-- [9:AT+FIE=0\r]
Sep 25 17:14:47.40: [ 9570]: --> [2:OK]
Sep 25 17:14:47.40: [ 9570]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Sep 25 17:14:47.42: [ 9570]: --> [2:OK]
Sep 25 17:14:47.42: [ 9570]: <-- [5:ATM0\r]
Sep 25 17:14:47.43: [ 9570]: --> [2:OK]
Sep 25 17:14:47.43: [ 9570]: <-- [14:AT+FCLASS=2.0\r]
Sep 25 17:14:47.55: [ 9570]: --> [2:OK]
Sep 25 17:14:47.55: [ 9570]: <-- [9:AT+FLO=1\r]
Sep 25 17:14:47.67: [ 9570]: --> [2:OK]
Sep 25 17:14:47.67: [ 9570]: <-- [9:AT+FPP=0\r]
Sep 25 17:14:47.79: [ 9570]: --> [2:OK]
Sep 25 17:14:47.79: [ 9570]: <-- [9:AT+FBO=0\r]
Sep 25 17:14:47.91: [ 9570]: --> [2:OK]
Sep 25 17:14:47.91: [ 9570]: <-- [10:AT+FCT=30\r]
Sep 25 17:14:48.03: [ 9570]: --> [2:OK]
Sep 25 17:14:48.03: [ 9570]: <-- [15:AT+FNR=1,1,1,0\r]
Sep 25 17:14:48.15: [ 9570]: --> [2:OK]
Sep 25 17:14:48.15: [ 9570]: <-- [9:AT+FIE=0\r]
Sep 25 17:14:48.27: [ 9570]: --> [2:OK]
Sep 25 17:14:48.27: [ 9570]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Sep 25 17:14:48.39: [ 9570]: --> [2:OK]
Sep 25 17:14:48.39: [ 9570]: <-- [24:AT+FLI="GLOBE Mail2Fax"\r]
Sep 25 17:14:48.52: [ 9570]: --> [2:OK]
Sep 25 17:14:48.52: [ 9570]: DIAL 21
Sep 25 17:14:48.52: [ 9570]: <-- [7:ATDT21\r]
Sep 25 17:15:04.96: [ 9570]: --> [4:+FCO]
Sep 25 17:15:07.81: [ 9570]: --> [27:+FCI:"       49 251 520521"]
Sep 25 17:15:07.81: [ 9570]: REMOTE CSI "49 251 520521"
Sep 25 17:15:07.81: [ 9570]: --> [20:+FIS:1,5,0,2,1,1,0,3]
Sep 25 17:15:07.81: [ 9570]: --> [2:OK]
Sep 25 17:15:07.81: [ 9570]: REMOTE best rate 14400 bit/s
Sep 25 17:15:07.81: [ 9570]: REMOTE max page width 1728 pixels in 215 mm
Sep 25 17:15:07.81: [ 9570]: REMOTE max unlimited page length 
Sep 25 17:15:07.81: [ 9570]: REMOTE best vres 7.7 line/mm
Sep 25 17:15:07.81: [ 9570]: REMOTE best format 2-D MR
Sep 25 17:15:07.81: [ 9570]: REMOTE supports T.30 Annex A, ECM
Sep 25 17:15:07.81: [ 9570]: REMOTE best 10 ms/scanline
Sep 25 17:15:07.81: [ 9570]: USE 14400 bit/s
Sep 25 17:15:07.81: [ 9570]: USE 10 ms/scanline
Sep 25 17:15:07.81: [ 9570]: <-- [5:ATH0\r]
Sep 25 17:15:09.43: [ 9570]: --> [7:+FHS:20]
Sep 25 17:15:09.43: [ 9570]: REMOTE HANGUP: Unspecified Transmit Phase B
error (code 20)
Sep 25 17:15:10.32: [ 9570]: --> [2:OK]
Sep 25 17:15:10.32: [ 9570]: SESSION END

I have tried four fax-clients (two here in our company, two mailboxes).

I hope someone can help me

Matthias


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null