HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Chase multiport modem and Hylafax...



Hi, I wonder if someone could possibly shed some light on a problem I'm
having setting up Hyalfax with a Chase PCI-RAS 4 port modem. I've installed
the modem and the driver modules, and got all the ports (ttyCH0 - 3)
responding correctly to cu.

Next I configured a faxgetty in /etc/inittab for the first port (ttyCH0)...

C0:2345:respawn:/usr/sbin/faxgetty ttyCH0

setup the config.ttyCH0 file for Hylafax and tested it, everything was fine,
the modem port would dial out and send faxes with no problem.

Then I tried the same process for ttyCH1. This is where the problem occurs,
faxaddmodem can't communicate with the port, the faxgetty for CH1 is
configured as above in /etc/inittab, ps shows the following...

  PID TTY      STAT   TIME COMMAND

  548 ?        S      0:00 /usr/sbin/faxq
  550 ?        S      0:00 /usr/sbin/hfaxd -i hylafax
  587 ?        S      0:00 /usr/sbin/faxgetty ttyCH0
  629 ?        S      0:00 /usr/sbin/faxgetty ttyCH1

I can still cu to ttyCH1 which is a bit weird. faxstat shows the
following...

HylaFAX scheduler on testbox-2: Running
Modem ttyCH0 (20381342): Running and idle
Modem ttyCH1 (20381291): Waiting for modem to come ready

Help! :) TIA for any advice.

Will Mc Donald.

Companies House Direct / Orchid Telematics Systems Administration.




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions